USB 1.0 IDE to ATAPI drive enclosure failure

[Barney Wolff]

On Mon, Nov 24, 2003 at 04:44:02PM -0500, Jesse Guardiani wrote:
> 
> I'm running FreeBSD 5.1-RELEASE. I just bought a generic
> USB 1.1/2.0/firewire external drive enclosure for my 32gb
> Travelstar 2.0" 12.5mm hard drive.
> 
> The device shows up like this:
> 
> Nov 18 14:06:16 trevarthan kernel: umass0: Acer Labs USB 2.0 Storage Device, rev 2.00/1.03, addr 3
> Nov 18 14:06:16 trevarthan kernel: da0 at umass-sim0 bus 0 target 0 lun 0
> Nov 18 14:06:17 trevarthan kernel: da0: <USB 2.0 Storage Device 0100> Fixed Direct Access SCSI-0 device
> Nov 18 14:06:17 trevarthan kernel: da0: 1.000MB/s transfers
> Nov 18 14:06:17 trevarthan kernel: da0: 30520MB (62506080 512 byte sectors: 255H 63S/T 3890C)
> 
> But `ls -al /dev/da*` reveals no slices:

If you're using an ohci usb controller, perhaps you need a patch.
Browse the -current archives for the last week or so.

Why hasn't anything been committed?

-- 
Barney Wolff         http://www.databus.com/bwresume.pdf
I'm available by contract or FT, in the NYC metro area or via the 'Net.