Recent -current hangs on Tyan S2460 before finishing boot

Benjamin Lewis bhlewis at wossname.net
Wed Nov 12 21:05:52 PST 2003


Hello,

I'm having trouble getting recent (post- "device apic", pre- turnstile) 
kernels to boot on my Tyan S2460 (Tiger MP) system with dual AMD 
Athlons.  What happens is that the machine seems to get "stuck" soon
after the "Waiting for SCSI devices to settle" message is printed -- it
appears to be willing to wait forever rather than the SCSI_DELAY time.

Disabling ACPI in the BIOS has no apparent effect on the hang.  Using
SCHED_4BSD or SCHED_ULE likewise makes no difference.  I've been 
following the current@ list hoping to see someone else report a problem
similar to mine but haven't seen anything yet.

I do have a serial console attached to the machine and DDB enabled so
I'm able to provide some information and get more if needed.  I'm
including a copy of the boot messages from my last attempt to boot
"FreeBSD 5.1-CURRENT #2: Tue Nov 11 17:35:40 EST 2003" which was 
cvsup'ed shortly prior to the build date.  Included in the messages are
the output of "ps" and "trace" once I broke into ddb.

I'm also including output from "acpidump -t" and "mptable -verbose" 
since I've seen that information requested in the past.

Some details about the system that may be pertinent:
	1. It has two 1Ghz Athlon "Thunderbird" (Not MP) processors.
	   That hasn't been a problem so far.
	2. The BIOS is version 1.04 (latest is 1.05).  The last time I
	   tried updating to 1.05 (some time ago) I saw lots of error
	   messagess complaining about undefined ACPI stuff so I 		
	   reverted.
	3. There is a Tekram 390F (I think that's the model -- it uses
	   the sym driver) and an Adaptec 3944 SCSI controller.  A
	   single internal SCSI drive is connected to the Tekram and 10
	   external drives are connected to the two ports on the 3944.
	   The external drives are configured as a Vinum Raid10 array.
	   There's also a single IDE drive connected to one of the
	   built-in IDE controllers.

Please let me know if there is anything more you want to know.

Thanks,

-Ben

-------------- next part --------------
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -sv
-\|/-\|SMAP type=01 base=0000000000000000 len=000000000009f400
SMAP type=02 base=000000000009f400 len=0000000000000c00
SMAP type=02 base=00000000000e4800 len=000000000001b800
SMAP type=01 base=0000000000100000 len=000000000fef0000
SMAP type=03 base=000000000fff0000 len=000000000000fc00
SMAP type=04 base=000000000ffffc00 len=0000000000000400
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000fff80000 len=0000000000080000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #2: Tue Nov 11 17:35:40 EST 2003
    bhlewis at akira.wossname.net:/export/obj/usr/src-all/current/src/sys/AKIRA.ULE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc089d000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc089d250.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc089d2fc.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc089d3a8.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc089d458.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc089d500.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc089d5a8.
Preloaded elf module "/boot/kernel/random.ko" at 0xc089d650.
Calibrating clock(s) ... i8254 clock: 1192972 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1000041373 Hz
CPU: AMD Athlon(tm) Processor (1000.04-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
  Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000000fb3dfff, 250695680 bytes (61205 pages)
avail memory = 251088896 (239 MB)
ACPI APIC Table: <PTLTD    APIC  >
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  1
 cpu1 (AP): APIC ID:  0
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
bios32: Found BIOS32 Service Directory header at 0xc00f7480
bios32: Entry = 0xfd6c0 (c00fd6c0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd6c0+0x120
pnpbios: Found PnP BIOS data at 0xc00f74d0
pnpbios: Entry = f0000:9ece  Rev = 1.0
Other BIOS signatures found:
MADT: Found IO APIC ID 2, Vector 0 at 0xfec00000
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic0: intpin 16 -> irq 16 (level, activelo)
ioapic0: intpin 17 -> irq 17 (level, activelo)
ioapic0: intpin 18 -> irq 18 (level, activelo)
ioapic0: intpin 19 -> irq 19 (level, activelo)
ioapic0: intpin 20 -> irq 20 (level, activelo)
ioapic0: intpin 21 -> irq 21 (level, activelo)
ioapic0: intpin 22 -> irq 22 (level, activelo)
ioapic0: intpin 23 -> irq 23 (level, activelo)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: active-hi
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: active-hi
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-hi
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x01000000   VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source>
acpi0: <PTLTD    RSDT  > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x800000b4
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=700c1022)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 3
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff iomem 0xdc000-0xdffff on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base ec000000, size 26, enabled
	map[14]: type 3, range 32, base e8106000, size 12, enabled
	map[18]: type 4, range 32, base 00001c90, size  2, port disabled
found->	vendor=0x1022, dev=0x700c, revid=0x11
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x700d, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x7410, revid=0x02
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[18]: type 4, range 32, base 00000000, size  3, enabled
	map[1c]: type 4, range 32, base 00000000, size  2, enabled
	map[20]: type 4, range 32, base 0000f000, size  4, enabled
found->	vendor=0x1022, dev=0x7411, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-8e, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
found->	vendor=0x1022, dev=0x7413, revid=0x01
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base 000dc000, size 12, enabled
pcib0: matched entry for 0.7.INTD (source )
pcib0: device is hardwired to IRQ 19
found->	vendor=0x1022, dev=0x7414, revid=0x07
	bus=0, slot=7, func=4
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
	intpin=d, irq=19
	map[10]: type 4, range 32, base 00001000, size  8, enabled
	map[14]: type 1, range 32, base e8105000, size  8, enabled
	map[18]: type 1, range 32, base e8101000, size 12, enabled
pcib0: matched entry for 0.9.INTA (source )
pcib0: device is hardwired to IRQ 17
found->	vendor=0x1000, dev=0x000f, revid=0x03
	bus=0, slot=9, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0200, cachelnsz=16 (dwords)
	lattimer=0x8c (4200 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=17
	map[10]: type 4, range 32, base 00001400, size  8, enabled
	map[14]: type 1, range 32, base e8102000, size 12, enabled
pcib0: matched entry for 0.11.INTA (source )
pcib0: device is hardwired to IRQ 19
found->	vendor=0x9004, dev=0x7895, revid=0x04
	bus=0, slot=11, func=0
	class=01-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=19
	powerspec 1  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00001800, size  8, enabled
	map[14]: type 1, range 32, base e8103000, size 12, enabled
pcib0: matched entry for 0.11.INTB (source )
pcib0: device is hardwired to IRQ 16
found->	vendor=0x9004, dev=0x7895, revid=0x04
	bus=0, slot=11, func=1
	class=01-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
	intpin=b, irq=16
	powerspec 1  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00001c00, size  6, enabled
pcib0: matched entry for 0.12.INTA (source )
pcib0: device is hardwired to IRQ 16
found->	vendor=0x1274, dev=0x5880, revid=0x02
	bus=0, slot=12, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
	intpin=a, irq=16
	powerspec 1  supports D0 D2 D3  current D0
	map[10]: type 1, range 32, base e8104000, size 12, enabled
	map[14]: type 4, range 32, base 00001c40, size  6, enabled
	map[18]: type 1, range 32, base e8000000, size 20, enabled
pcib0: matched entry for 0.13.INTA (source )
pcib0: device is hardwired to IRQ 17
found->	vendor=0x8086, dev=0x1229, revid=0x08
	bus=0, slot=13, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=17
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <AMD 762 host to AGP bridge> port 0x1c90-0x1c93 mem 0xe8106000-0xe8106fff,0xec000000-0xefffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
agp0: gatt -> ag_pdir 0x252000
agp0: allocating GATT for 16384 AGP page entries
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xe9000000-0xe9ffffff
pcib1:   prefetched decode 0xf0000000-0xf7ffffff
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base e9000000, size 24, enabled
	map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib1: matched entry for 1.5.INTA (source )
pcib1: device is hardwired to IRQ 18
found->	vendor=0x10de, dev=0x0110, revid=0xb2
	bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=18
	powerspec 2  supports D0 D3  current D0
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 766 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7 at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
amdpm0: <AMD 756/766/768 Power Management Controller> port 0x80e0-0x80ff at device 7.3 on pci0
smbus0: <System Management Bus> on amdpm0
smb0: <SMBus generic I/O> on smbus0
ohci0: <AMD-766 USB Controller> mem 0xdc000-0xdcfff irq 19 at device 7.4 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AMD-766 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ums0: Logitech USB-PS/2 Mouse M-BA47, rev 1.00/1.20, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
sym0: <875> port 0x1000-0x10ff mem 0xe8101000-0xe8101fff,0xe8105000-0xe81050ff irq 17 at device 9.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
ahc0: <Adaptec 3944A Ultra SCSI adapter> port 0x1400-0x14ff mem 0xe8102000-0xe8102fff irq 19 at device 11.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable not present
ahc0: external cable is present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 412 instructions downloaded
ahc0: Features 0x16235, Bugs 0x15, Flags 0x20405440
aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3944A Ultra SCSI adapter> port 0x1800-0x18ff mem 0xe8103000-0xe8103fff irq 16 at device 11.1 on pci0
ahc1: Defaulting to MEMIO off
ahc1: Reading SEEPROM...done.
ahc1: internal 50 cable not present, internal 68 cable not present
ahc1: external cable is present
ahc1: BIOS eeprom is present
ahc1: High byte termination Enabled
ahc1: Low byte termination Enabled
ahc1: Downloading Sequencer Program... 412 instructions downloaded
ahc1: Features 0x16235, Bugs 0x15, Flags 0x20485440
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
pcm0: <Creative CT5880-C> port 0x1c00-0x1c3f irq 16 at device 12.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features AMAP
pcm0: sndbuf_setmap 274000, 1000; 0xc2d40000 -> 274000
pcm0: sndbuf_setmap 296000, 1000; 0xc2d42000 -> 296000
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1c40-0x1c7f mem 0xe8000000-0xe80fffff,0xe8104000-0xe8104fff irq 17 at device 13.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:d0:b7:83:e5:1e
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data ffffffff 00 03
psm: status 00 00 64
psm: status 00 02 64
psm: data ffffffff 02 64
psm0: failed to get data.
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
sio0: irq maps: 0xc001 0xc011 0xc001 0xc001
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0xc001 0xc009 0xc001 0xc001
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
npx0: [FAST]
nstray irq13
px0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xce000-0xcffff,0xcd000-0xcdfff,0xcc800-0xccfff,0xc0000-0xcc7ff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 failed to probe on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 05 a0 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1000041373 Hz quality -100
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA100 on AMD 766 chip
GEOM: create disk ad0 dp=0xc2dbdb70
ad0: <WDC WD600AB-00BVA0/21.01H21> ATA-5 disk at ata0-master
ad0: 57241MB (117231408 sectors), 116301 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
Waiting 10 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/13/63 s:63 l:41929587
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 21467948544 end 21467980799
GEOM: Configure ad0c, start 0 length 60022480896 end 60022480895
GEOM: Configure ad0s1b, start 0 length 536870912 end 536870911
GEOM: Configure ad0s1c, start 0 length 21467948544 end 21467948543
GEOM: Configure ad0s1f, start 536935936 length 2147483648 end 2684419583
GEOM: Configure ad0s1g, start 2684419584 length 3221225472 end 5905645055
GEOM: Configure ad0s1h, start 5905645056 length 15562303488 end 21467948543
Stopped at      siointr1+0xec:  jmp     siointr1+0x220
db> ps
  pid   proc     uarea   uid  ppid  pgrp  flag   stat  wmesg    wchan  cmd
   48 c2d193c8 ce750000    0     0     0 0000204 [IWAIT] swi0: tty:sio
   47 c2d195ac ce751000    0     0     0 0000204 [SLP]usbtsk 0xc0867cc0] usbtask
   46 c2d19790 ce752000    0     0     0 0000204 [SLP]usbdly 0xce711cf4] usb0
    8 c2d19974 ce753000    0     0     0 0000204 [SLP]actask 0xc072d22c] acpi_task2
    7 c2d19b58 ce754000    0     0     0 0000204 [SLP]actask 0xc072d22c] acpi_task1
    6 c2ca5b58 ce714000    0     0     0 0000204 [SLP]actask 0xc072d22c] acpi_task0
   45 c2ca5d3c ce715000    0     0     0 0000204 new [IWAIT] swi5:+
    5 c2cb1000 ce716000    0     0     0 0000204 [SLP]tqthr 0xc073ddc8] taskqueue
   44 c2cb11e4 ce717000    0     0     0 0000204 new [IWAIT] swi6:+
   43 c2cb13c8 ce718000    0     0     0 0000204 [IWAIT] swi7: task queue
   42 c2cb15ac ce719000    0     0     0 0000204 new [IWAIT] swi3: cambio
   41 c2cb1790 ce71a000    0     0     0 0000204 new [IWAIT] swi2: camnet
   40 c2cb1974 ce71b000    0     0     0 0000204 new [IWAIT] swi7: acpitaskq
   39 c2cb1b58 ce71c000    0     0     0 0000204 [SLP]- 0xc088f4c0] random
    4 c2cb1d3c ce71d000    0     0     0 0000204 [SLP]- 0xc072f9c0] g_down
    3 c2cb3000 ce71e000    0     0     0 0000204 [SLP]- 0xc072f9bc] g_up
    2 c2cb31e4 ce71f000    0     0     0 0000204 [SLP]- 0xc072f9b4] g_event
   38 c2c975ac ce6e5000    0     0     0 0000204 new [IWAIT] swi1: net
   37 c2c97790 ce6e6000    0     0     0 0000204 new [IWAIT] swi4: vm
--More--
   36 c2c97974 ce6e7000    0     0     0 000020c [IWAIT] swi8: tty:sio clock
   35 c2c97b58 ce6e8000    0     0     0 0000204 new [IWAIT] irq0: clk
   34 c2c97d3c ce6e9000    0     0     0 0000204 new [IWAIT] irq23:
   33 c2ca5000 ce6ea000    0     0     0 0000204 new [IWAIT] irq22:
   32 c2ca51e4 ce6eb000    0     0     0 0000204 new [IWAIT] irq21:
   31 c2ca53c8 ce6ec000    0     0     0 0000204 new [IWAIT] irq20:
   30 c2ca55ac ce6ed000    0     0     0 0000204 [IWAIT] irq19: ohci0 ahc0
   29 c2ca5790 ce712000    0     0     0 0000204 new [IWAIT] irq18:
   28 c2ca5974 ce713000    0     0     0 0000204 new [IWAIT] irq17: fxp0 sym0
   27 c16bb1e4 cdd05000    0     0     0 0000204 new [IWAIT] irq16: ahc1 pcm0
   26 c16bb3c8 cdd06000    0     0     0 0000204 new [IWAIT] irq15: ata1
   25 c16bb5ac cdd07000    0     0     0 0000204 [IWAIT] irq14: ata0
   24 c16bb790 cdd08000    0     0     0 0000204 new [IWAIT] irq13:
   23 c16bb974 cdd09000    0     0     0 0000204 new [IWAIT] irq12: psm0
   22 c16bbb58 cdd2e000    0     0     0 0000204 new [IWAIT] irq11:
   21 c16bbd3c cdd2f000    0     0     0 0000204 new [IWAIT] irq10:
   20 c2c97000 ce6e2000    0     0     0 0000204 new [IWAIT] irq9: acpi0
   19 c2c971e4 ce6e3000    0     0     0 0000204 new [IWAIT] irq8: rtc
   18 c2c973c8 ce6e4000    0     0     0 0000204 new [IWAIT] irq7: ppc0
   17 c16b4000 cdcb4000    0     0     0 0000204 new [IWAIT] irq6:
--More--
   16 c16b41e4 cdcfd000    0     0     0 0000204 new [IWAIT] irq5:
   15 c16b43c8 cdcfe000    0     0     0 0000204 new [IWAIT] irq4: sio0
   14 c16b45ac cdcff000    0     0     0 0000204 new [IWAIT] irq3: sio1
   13 c16b4790 cdd00000    0     0     0 0000204 [IWAIT] irq1: atkbd0
   12 c16b4974 cdd01000    0     0     0 000020c [CPU 0] idle: cpu0
   11 c16b4b58 cdd02000    0     0     0 000020c [Can run] idle: cpu1
    1 c16b4d3c cdd03000    0     0     0 0000200 new [INACTIVE] swapper
   10 c16bb000 cdd04000    0     0     0 0000204 [CV]ktrace 0xc0733474] ktrace
    0 c072ff60 c0c1f000    0     0     0 0000200 [SLP]conifhk 0xc07114dc] swapper
db> cont
Stopped at      siointr1+0xec:  jmp     siointr1+0x220
db> con   bt
No such command
db> trace
siointr1(c2d5e800,16,cdcccc54,80046,80046) at siointr1+0xec
siointr(c2d5e800,c06ff1c0,c16b58c0,c16af88c,c16b4974) at siointr+0x88
intr_execute_handlers(c16af88c,cdcccc90,c16b58c0,cdccccd4,c06933ad) at intr_execute_handlers+0x68
lapic_handle_intr(24) at lapic_handle_intr+0x5b
Xapic_isr1() at Xapic_isr1+0x3d
--- interrupt, eip = 0xc06a0e75, esp = 0xcdccccd4, ebp = 0xcdccccd4 ---
cpu_idle_default(cdcccd08,c0528355,0,0,0) at cpu_idle_default+0x5
cpu_idle(0,0,0,0,0) at cpu_idle+0x28
idle_proc(0,cdcccd48,0,0,0) at idle_proc+0x25
fork_exit(c0528330,0,cdcccd48) at fork_exit+0x80
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xcdcccd7c, ebp = 0 ---
db> cont
Stopped at      siointr1+0xec:  jmp     siointr1+0x220
db> b trace
siointr1(c2d5e800,16,cdcccc54,80046,80046) at siointr1+0xec
siointr(c2d5e800,c06ff1c0,c16b58c0,c16af88c,c16b4974) at siointr+0x88
intr_execute_handlers(c16af88c,cdcccc90,c16b58c0,cdccccd4,c06933ad) at intr_execute_handlers+0x68
lapic_handle_intr(24) at lapic_handle_intr+0x5b
Xapic_isr1() at Xapic_isr1+0x3d
--- interrupt, eip = 0xc06a0e75, esp = 0xcdccccd4, ebp = 0xcdccccd4 ---
cpu_idle_default(cdcccd08,c0528355,0,0,0) at cpu_idle_default+0x5
cpu_idle(0,0,0,0,0) at cpu_idle+0x28
idle_proc(0,cdcccd48,0,0,0) at idle_proc+0x25
fork_exit(c0528330,0,cdcccd48) at fork_exit+0x80
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xcdcccd7c, ebp = 0 ---
db> cont
Stopped at      siointr1+0xec:  jmp     siointr1+0x220
db> reset-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/kernel/kernel text=0x2f82c4 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\data=0x3177c+0x4b9c4 |/-\|/-\|/-\|syms=[0x4+0x3f440/-\|/-\|/-\|/-\|+0x4+0x4d633/-\|/-\|/-\|/-\|/-\|]
-------------- next part --------------
/*
  RSD PTR: OEM=PTLTD, ACPI_Rev=1.0x (0)
	RSDT=0x0fffd51d, cksum=57
 */
/*
  RSDT: Length=44, Revision=1, Checksum=53,
	OEMID=PTLTD, OEM Table ID=  RSDT, OEM Revision=0x6040000,
	Creator ID= LTP, Creator Revision=0x0
	Entries={ 0x0ffffb2e, 0x0ffffba2 }
 */
/*
  FADT:	FACS=0xfffffc0, DSDT=0xfffd549
	INT_MODEL=APIC
	Preferred_PM_Profile=Unspecified (0)
	SCI_INT=9
	SMI_CMD=0x802f, ACPI_ENABLE=0xf0, ACPI_DISABLE=0xf1, S4BIOS_REQ=0x0
	PSTATE_CNT=0x0
	PM1a_EVT_BLK=0x8000-0x8003
	PM1a_CNT_BLK=0x8004-0x8005
	PM_TMR_BLK=0x8008-0x800b
	GPE0_BLK=0x8020-0x8023
	P_LVL2_LAT=101 us, P_LVL3_LAT=1001 us
	FLUSH_SIZE=0, FLUSH_STRIDE=0
	DUTY_OFFSET=1, DUTY_WIDTH=0
	DAY_ALRM=13, MON_ALRM=0, CENTURY=50
	IAPC_BOOT_ARCH=
	Flags={WBINVD,PROC_C1,RTC_S4}
 */
/*
  FACS:	Length=64, HwSig=0x00000000, Firm_Wake_Vec=0x00000000
	Global_Lock=
	Flags=
	Version=0
 */
/*
  DSDT: Length=9701, Revision=1, Checksum=1,
	OEMID=AMD, OEM Table ID=AMDACPI, OEM Revision=0x6040000,
	Creator ID=MSFT, Creator Revision=0x100000b
 */
/*
  APIC: Length=94, Revision=1, Checksum=49,
	OEMID=PTLTD, OEM Table ID=  APIC, OEM Revision=0x6040000,
	Creator ID= LTP, Creator Revision=0x0
	Local APIC ADDR=0xfee00000
	Flags={PC-AT}

	Type=Local APIC
	ACPI CPU=0
	Flags={ENABLED}
	APIC ID=1

	Type=Local APIC
	ACPI CPU=1
	Flags={ENABLED}
	APIC ID=0

	Type=IO APIC
	APIC ID=2
	INT BASE=0
	ADDR=0x00000000fec00000

	Type=INT Override
	BUS=0
	IRQ=0
	INTR=2
	Flags={Polarity=active-hi, Trigger=edge}

	Type=Local NMI
	ACPI CPU=0
	LINT Pin=1
	Flags={Polarity=active-hi, Trigger=edge}

	Type=Local NMI
	ACPI CPU=1
	LINT Pin=1
	Flags={Polarity=active-hi, Trigger=edge}
 */
-------------- next part --------------

===============================================================================

MPTable, version 2.0.15

 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009f400
 searching CMOS 'top of mem' @ 0x0009f000 (636K)
 searching default 'top of mem' @ 0x0009fc00 (639K)
 searching BIOS @ 0x000f0000

 MP FPS found in BIOS @ physical addr: 0x000f7510

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:			BIOS
  physical address:		0x000f7510
  signature:			'_MP_'
  length:			16 bytes
  version:			1.4
  checksum:			0x0f
  mode:				Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:		0x0009f890
  signature:			'PCMP'
  base table length:		292
  version:			1.4
  checksum:			0xcf
  OEM ID:			'TYAN    '
  Product ID:			'GUINNESS    '
  OEM table pointer:		0x00000000
  OEM table size:		0
  entry count:			28
  local APIC address:		0xfee00000
  extended table length:	344
  extended table checksum:	17

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:	APIC ID	Version	State		Family	Model	Step	Flags
		 1	 0x10	 BSP, usable	 6	 4	 2	 0x183fbff
		 0	 0x10	 AP, usable	 6	 4	 2	 0x183fbff
--
Bus:		Bus ID	Type
		 0	 PCI   
		 1	 PCI   
		 2	 ISA   
--
I/O APICs:	APIC ID	Version	State		Address
		 2	 0x11	 usable		 0xfec00000
--
I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	active-hi        edge	     2	   0	      2	   0
		INT	active-hi        edge	     2	   1	      2	   1
		INT	active-hi        edge	     2	   0	      2	   2
		INT	active-hi        edge	     2	   3	      2	   3
		INT	active-hi        edge	     2	   4	      2	   4
		INT	active-lo       level	     0	 9:A	      2	  17
		INT	active-hi        edge	     2	   6	      2	   6
		INT	active-hi        edge	     2	   7	      2	   7
		INT	active-hi        edge	     2	   8	      2	   8
		INT	active-hi        edge	     2	   9	      2	   9
		INT	active-lo       level	     2	  10	      2	  10
		INT	active-lo       level	     0	 7:D	      2	  19
		INT	active-hi        edge	     2	  12	      2	  12
		INT	active-hi        edge	     2	  13	      2	  13
		INT	active-hi        edge	     2	  14	      2	  14
		INT	active-lo       level	     0	11:B	      2	  16
		INT	active-lo       level	     0	11:A	      2	  19
		INT	active-lo       level	     0	12:A	      2	  16
		INT	active-lo       level	     0	13:A	      2	  17
		INT	active-lo       level	     1	 5:A	      2	  18
--
Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	active-hi        edge	     2	   0	    255	   0
		NMI	active-hi        edge	     1	 0:A	    255	   1

-------------------------------------------------------------------------------

MP Config Extended Table Entries:

--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0x0
 address range: 0x10000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0x10000000
 address range: 0xd8100000
--
System Address Space
 bus ID: 0 address type: prefetch address
 address base: 0xe8100000
 address range: 0xff00000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xf8000000
 address range: 0x6e00000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xfee01000
 address range: 0x11ff000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xa0000
 address range: 0x24000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xc8000
 address range: 0x2000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xcc000
 address range: 0x2000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd0000
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd2000
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd4000
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd6000
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd8000
 address range: 0x2000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xe0000
 address range: 0x12000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xf4000
 address range: 0x2000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xf8000
 address range: 0x4000
--
Bus Heirarchy
 bus ID: 2 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000001

===============================================================================



More information about the freebsd-current mailing list