panic: probing for non-PCI bus

John Hay jhay at icomtek.csir.co.za
Tue Nov 11 12:39:06 PST 2003


On Tue, Nov 11, 2003 at 03:28:25PM -0500, John Baldwin wrote:
> 
> On 11-Nov-2003 John Hay wrote:
> >> >> > Upgrading a Asus P2L97-DS dual Pentium II 266MHz box, I got this panic
> >> >> > when booting:
> >> >> > 
> >> >> >############################
> > ...
> >> >> > CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU)
> >> >> >   Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
> >> >> >   Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
> >> >> > real memory  = 134205440 (127 MB)
> >> >> > avail memory = 125018112 (119 MB)
> >> >> > MPTable: <OEM00000 PROD00000000>
> >> >> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> >> >> >  cpu0 (BSP): APIC ID:  1
> >> >> >  cpu1 (AP): APIC ID:  0
> >> >> > ioapic0: Assuming intbase of 0
> >> >> > ioapic0 <Version 1.1> irqs 0-23 on motherboard
> >> >> > Pentium Pro MTRR support enabled
> >> >> > acpi0: <ASUS   P2L97-DS> on motherboard
> >> >> > pcibios: BIOS version 2.10
> >> >> > Using $PIR table, 7 entries at 0xc00f0d20
> >> >> > acpi0: Power Button (fixed)
> >> >> > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> >> >> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
> >> >> > acpi_cpu0: <CPU> on acpi0
> >> >> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> >> >> > pci0: <ACPI PCI bus> on pcib0
> >> >> > pcib0: slot 4 INTD is routed to irq 5
> >> >> > pcib0: slot 6 INTA is routed to irq 5
> >> >> > pcib0: slot 10 INTA is routed to irq 12
> >> >> > pcib0: slot 11 INTA is routed to irq 10
> >> >> > pcib0: slot 12 INTA is routed to irq 11
> >> >> > panic: probing for non-PCI bus
> >> >> > cpuid = 0; 
> >> >> > Uptime: 1s
> >> >> > Shutting down ACPI
> >> >> > Automatic reboot in 15 seconds - press a key on the console to abort
> >> >> > Rebooting...
> >> >> >############################
> >> >> 
> >> >> Can you provide a copy of your mptable?
> >> 
> >> Wait, you have ACPI enabled, but ACPI didn't enumerate your CPUs?  Umm, can
> >> you provide an acpdump -t from your machine?  Also, can you try hacking
> >> mptable_pci_probe_table() in mptable.c to print out pci0 and bus at the start
> >> of the function?  Thanks. 
> > 
> > Ok, acpidump -t output at the end.
> 
> Oof, no MADT table.  Your BIOS sucks. :-P  Don't use ACPI because PCI interrupts
> aren't going to work otherwise.  Does this system have an AGP slot?  Also, do
> you have a dmesg from before?

Hmmm, I'll have to open it up to see if it has an AGP slot, but it is in
the server room at work. :-/ Here is a dmesg with a kernel of about Nov 3.

John
-- 
John Hay -- John.Hay at icomtek.csir.co.za / jhay at FreeBSD.org

OK unload kernel
OK boot kernel.work
/boot/kernel.work/kernel text=0x1fc54c data=0x24d6c+0x464b4 syms=[0x4+0x2c720+0x4+0x36d6a]
/boot/kernel.work/if_vlan.ko text=0x22b0 data=0x1d8+0x5c syms=[0x4+0x620+0x4+0x573]
/boot/kernel.work/if_fxp.ko text=0x7840 data=0x1014+0xc syms=[0x4+0xcb0+0x4+0xdb2]
loading required module 'miibus'
/boot/kernel.work/miibus.ko text=0x15940 data=0xc84+0x68 syms=[0x4+0x1a90+0x4+0x2240]
/boot/kernel.work/usb.ko text=0x2036c data=0xc0c+0x148 syms=[0x4+0x2bf0+0x4+0x331f]
/boot/kernel.work/acpi.ko text=0x3b718 data=0x16c4+0xee8 syms=[0x4+0x5b90+0x4+0x7944]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #49: Mon Nov  3 09:16:49 SAST 2003
    jhay at beast.icomtek.csir.co.za:/b/src/sys/i386/compile/BEAST
Preloaded elf kernel "/boot/kernel.work/kernel" at 0xc076e000.
Preloaded elf module "/boot/kernel.work/if_vlan.ko" at 0xc076e224.
Preloaded elf module "/boot/kernel.work/if_fxp.ko" at 0xc076e2d8.
Preloaded elf module "/boot/kernel.work/miibus.ko" at 0xc076e388.
Preloaded elf module "/boot/kernel.work/usb.ko" at 0xc076e438.
Preloaded elf module "/boot/kernel.work/acpi.ko" at 0xc076e4e8.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
  Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 134205440 (127 MB)
avail memory = 125018112 (119 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   P2L97-DS> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f0d20
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 18 -> irq 5
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 16 -> irq 11
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 4.1 (no driver attached)
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 2 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Disabled Device 13 trap SMI for access to RTC chip
pci0: <bridge, PCI-unknown> at device 4.3 (no driver attached)
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xd000-0xd0ff mem 0xe1000000-0xe1000fff irq 2 at device 6.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xb800-0xb81f mem 0xe0800000-0xe08fffff,0xe3000000-0xe3000fff irq 5 at device 10.0 on pci0
fxp0: Ethernet address 00:a0:c9:8d:7c:5f
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: [MPSAFE]
fxp1: <Intel 82558 Pro/100 Ethernet> port 0xb400-0xb41f mem 0xe0000000-0xe00fffff,0xe2000000-0xe2000fff irq 10 at device 11.0 on pci0
fxp1: Ethernet address 00:a0:c9:8d:74:dd
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: [MPSAFE]
pci0: <display, VGA> at device 12.0 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
orm0: <Option ROMs> at iomem 0xc8000-0xccfff,0xc0000-0xc7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounter "TSC" frequency 267274625 Hz quality 800
Timecounters tick every 10.000 msec
Waiting 2 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xc1c8f850
GEOM: create disk da1 dp=0xc1c8f450
GEOM: create disk da2 dp=0xc1c8ec50
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34572N 0784> Fixed Direct Access SCSI-2 device 
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <CONNER CFP4207S  4.28GB 1420> Fixed Direct Access SCSI-2 device 
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
da2 at ahc0 bus 0 target 4 lun 0
da2: <SEAGATE ST32155N 0594> Fixed Direct Access SCSI-2 device 
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a



More information about the freebsd-current mailing list