Random reboots on -CURRENT of 20031105
Jaco H. van Tonder
freebsd-questions at premsoft.co.za
Thu Nov 6 09:03:41 PST 2003
Hi all,
Last night I cvsup-ed to -CURRENT and built world and kernel. Today this
machine rebooted alot by itself, with absolutely no load on it whatsoever. I
dont know how to determine what is causing the reboots, so if anyone can
give me a hint, it would be greatly appreciated. This machine acts as a
router/firewall. I know that this is not a hardware problem, seeing that for
the last few months this machine was running pretty much stable under heavy
load (building test kernels, compiling source code, etc) with 5.1-RELEASE.
/var/log/messages does not really say anything. :(
Attached is my dmesg output and my kernel config. If you need any other info
please drop me a mail.
Thank you!
dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Thu Nov 6 01:13:55 SAST 2003
jacovt at firewall.symphiano:/usr/obj/usr/src/sys/FIREWALL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06cf000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
real memory = 134217728 (128 MB)
avail memory = 124952576 (119 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fded0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:8 INTA BIOS irq 11
pci_cfgintr: 0:10 INTA BIOS irq 10
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 0:1 INTA routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 UDMA33 controller> port 0xe000-0xe00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe800-0xe87f mem
0xdf800000-0xdf80007f irq 11 at device 8.0 on pci0
xl0: Ethernet address: 00:50:da:45:92:81
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, audio> at device 10.0 (no driver attached)
orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 501140354 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
deny, logging limited to 1000 packets/entry by default
GEOM: create disk ad0 dp=0xc1c48370
ad0: 2014MB <ST32122A> [4092/16/63] at ata0-master UDMA33
acd0: CDROM <CD-ROM 50X> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f at device 7.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f at device 7.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f at device 7.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
Kernel Config:
firewall% cat /usr/src/sys/i386/conf/FIREWALL
machine i386
cpu I686_CPU
ident FIREWALL
maxusers 0
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big
directories
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires
PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
#options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# Debugging for use in -current
makeoptions DEBUG=-g
options DDB #Enable the kernel debugger
options DDB_UNATTENDED
#options INVARIANTS #Enable calls of extra sanity
checking
#options INVARIANT_SUPPORT #Extra sanity checks of internal
structures, required by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks
and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for
speed
device isa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
# syscons is the default console driver, resembling an SCO console
device sc
#device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device ppi # Parallel port interface device
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# Firewall Stuff
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=1000
options IPDIVERT
firewall%
Jaco van Tonder
Magic Developer :: Premsoft Development (Pty) Ltd
Direct: +27 11 312 2122 :: Fax: +27 11 312 2122 :: Mobile: +27 83 417 5424
Email: jaco at premsoft.co.za :: Web: http://www.premsoft.co.za/
PGP: http://www.premsoft.co.za/jaco/jaco_premsoft.asc
More information about the freebsd-current
mailing list