new interrupts not working for me
jhb at FreeBSD.org
Thu Nov 6 07:30:59 PST 2003
On 06-Nov-2003 Peter Schultz wrote:
> John Baldwin wrote:
>> On 05-Nov-2003 Peter Schultz wrote:
>>>I have a Tyan S1832DL w/dual pii 350s and it's not able to boot. Seems
>>>to be having trouble with my adaptec scsi controller, I get a whole
>>>bunch of output like this hand transcribed bit, it comes after "waiting
>>>15 seconds for scsi devices to settle":
>>>ahc0 timeout SCB already complete interrupts may not be functioning
>>>Infinite interrupt loop INTSTAT=0(probe3:ahc0:0:3:0): SCB 0x6 - timed out
>>>Anyone else seeing this? There are probably 100+ related lines of
>>>output, I'll have to configure serial debugging if you need to see it.
>> The dmesg output excluding all the ahc0 errors would help figure out
>> why your interrupts aren't working. However, I just committed a patch
>> that might fix your problem.
> Now the kernel just dies and the machine reboots right in the beginning
> when it's setting up the ACPI/APIC stuff. Of course, with ACPI off,
> there's no apparent problem with the kernel.
Ok. Did the old kernel break before with ACPI turned off? It should
have. By the way, I've committed a fix for the ACPI breakage.
John Baldwin <jhb at FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve!" - http://www.FreeBSD.org/
More information about the freebsd-current