Problems with D-Link DWL-AG650 card under CURRENT (11/4-03)
Erik Haga
ehaga at mnemonic.no
Wed Nov 5 03:58:25 PST 2003
Hi,
I am running the newest version of CURRENT and have some problems with panic
when I insert a D-Link DWL-AG650 (atheros) wireless card.
FreeBSD pilt.xxx.xx 5.1-CURRENT FreeBSD 5.1-CURRENT #1: Wed Nov 5 12:12:35 CET
2003 root at pilt.xxx.xx:/usr/obj/usr/src/sys/GENERIC i386
When I insert the card the OS identifies the card as a 3Com card. I have tried
several changes on the GENERIC, but without luck.
cardbus1: Resource not specified in CIS: id=10, size=80
cardbus1: Resource not specified in CIS: id=14, size=80
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0x1000-0x107f mem
0xf4002000-0xf400207f irq 11 at device 0.0 on cardbus1
Fatal trap 19: non-maskable interrupt trap while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x8:0x078154a
stack pointer = 0x10:0xde057ba8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, IOPL = 0
current process = 7 (cbb1)
kernel: type 19 trap, code = 0
Stopped at xl_eeprom_wait+0x3a: movzwl %ax,%eax
The onboard NIC is a 3Com 3c905C-TX Fast Etherlink XL.
According to the doc the card is supported in current, and later in 5.2. You
have to compile with device ath and device ath_hal ????
The OS panic with or without the device-setting for ath and ath_hal.
Do you now way the card is identified as a 3Com card insted of a D-Link???
Regards
- Erik -
------------------------------------------------------
Erik Haga E-mail: ehaga at mnemonic.no
Mnemonic AS http://mnemonic.no
Waldemar Thranesgt. 77
0175 Oslo, Norway
+47 22 99 97 00 Fax: +47 22 99 97 01
+47 915 88 606
More information about the freebsd-current
mailing list