New <PNP0303> and aPic question

Tue Nov 4 08:18:16 PST 2003

On Tuesday 04 November 2003 17:10, Harald Schmalzbauer wrote:
> Hi all,
>
> with today's -current (with the new irq stuff) I get the following messages
> wich I haven't had before:
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0700> can't assign resources (port)
> Timecounter "TSC" frequency 1095821276 Hz quality 800

Mist, now it really is attached.

Sorry

>
> See attached the complete dmesg.
>
>
> Then I have a question regarding the aPic: I know that my hardware has such
> a aPic and under WinXP there were irqs assigned up to ~23.
> Is it possible to support that apic without SMP?
>
> Thanks,
>
> -Harry
-------------- next part --------------
and installed have the same CVS Id, deleting
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 14 14 
done
Uptime: 4h56m24s
Shutting down ACPI
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #27: Tue Nov  4 16:37:45 CET 2003
    harry at cale.flintsbach.schmalzbauer.de:/usr/obj/usr/src/sys/CALE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0974000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0974244.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc09742f0.
Timecounter "i8254" frequency 1183580 Hz quality 0
CPU: Intel(R) Celeron(TM) CPU                1100MHz (1095.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268173312 (255 MB)
avail memory = 250789888 (239 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0720ae2 (1000022)
VESA: NVIDIA
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f2a10
pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:31 INTD BIOS irq 7
pci_cfgintr: 0:31 INTB BIOS irq 9
pci_cfgintr: 0:31 INTC BIOS irq 10
pci_cfgintr: 0:31 INTB BIOS irq 9
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci2: <PCI bus> on pcib1
pci_cfgintr: 0:1 INTA routed to irq 4
pcib1: slot 0 INTA is routed to irq 4
nvidia0: <GeForce4 MX 440 with AGP8X> mem 0xf0000000-0xf3ffffff,0xfd000000-0xfdffffff irq 4 at device 0.0 on pci2
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib2
pci_cfgintr: 1:8 INTA BIOS irq 11
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfc9ff000-0xfc9fffff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:03:47:f0:c2:ef
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 7 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xefa0-0xefaf irq 9 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2
uhub2: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
uhub3: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 4
uhub3: 2 ports with 2 removable, bus powered
pcm0: <Intel ICH2 (82801BA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0
pcm0: <Analog Devices AD1885 AC97 Codec>
orm0: <Option ROMs> at iomem 0xd0800-0xd17ff,0xcf800-0xd07ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounter "TSC" frequency 1095821276 Hz quality 800
Timecounters tick every 1.000 msec
GEOM: create disk ad0 dp=0xc2d51a70
ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100
acd0: CDROM <SONY CDU4811> at ata1-master PIO4
pcm0: measured ac97 link rate at 55915 Hz
(probe2:ata1:0:0:0): Recovered Sense
(probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 
(probe2:ata1:0:0:0): CAM Status: SCSI Status Error
(probe2:ata1:0:0:0): SCSI Status: Check Condition
(probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
(probe2:ata1:0:0:0): Invalid field in CDB
(probe2:ata1:0:0:0): Recovered Sense
(probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 
(probe2:ata1:0:0:0): CAM Status: SCSI Status Error
(probe2:ata1:0:0:0): SCSI Status: Check Condition
(probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
(probe2:ata1:0:0:0): Invalid field in CDB
pass0 at ata1 bus 0 target 0 lun 0
pass0: <SONY CDU4811 PY0A> Removable CD-ROM SCSI-0 device 
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ad0s2a
Warning: pid 555 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 561 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 562 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 582 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 583 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 584 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 585 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 588 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 587 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 592 used static ldt allocation.
See the i386_set_ldt man page for more info
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: signature
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20031104/fbe34d13/attachment-0001.bin