viapm attach failure (was Re: loader vs PCI)

[Conrad Sabatier]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


On 20-May-2003 Julian Elischer wrote:
> 
> Is there any capability in the loader to do such things as get/set a PCI
> config space register?
> 
> Looking at the  man page I'd say not, but there is mention of
> some PNP capacity (though not currently working).
> 
> 
> Reason..
> 
> ASUS disable the SMBus on their new mother boards and have no BIOS entry
> to enable it, but it can be enabled from the PCI config regs. Without
> it you can not easily read the voltages, temperatures and Fan speeds.
> 
> You can use pciconf to enable it but by then it's too late
> for the ichsmb(4) driver to find it. The only other answer is to 
> enable it, and then kldload the ichsmb module, but the best answer
> would be to enable it from the loader so that it shows up on the PCI
> bus during normal boot.
> 
> (ASUS need to get a clue on this.. a BIOS option would be real nice..)

I have a related problem.  I'm trying to get the viapm (viapropm0) device
to attach properly at boot, but to no avail.  The device is recognized, but
I always get the following:

smbios0: <System Management BIOS> at iomem 0xf7a20-0xf7a3e on motherboard
smbios0: Version: 2.03, Revision: 1.08

found-> vendor=0x1106, dev=0x3057, revid=0x10
        bus=0, slot=7, func=4
        class=06-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type 4, range 32, base 00001080, size  6, enabled

viapropm0: SMBus I/O base at 0x4000
viapropm0: <VIA VT82C686A Power Management Unit> port 0x4000-0x400f at
device 7.4 on pci0
viapropm0: failed to enable port mapping!
viapropm0: could not allocate bus space
device_probe_and_attach: viapropm0 attach returned 6

I have all the requisite devices configured into the kernel.  I'm not sure
what hint, if any, might help resolve this issue.  Ideas?

TIA

- -- 
Conrad Sabatier <conrads at cox.net> - "In Unix veritas"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (FreeBSD)

iD8DBQE+2Ug5p1KR3mGnrrgRAiYGAKC+Pfw+xAMpmC1zs1IET8YDYCgV+QCgr2b/
tOCc4pN5DSmMqVxHUWjzZWM=
=DNDt
-----END PGP SIGNATURE-----