BCM5703 GigE ifs on Supermicro X5DL8-GG m/b not detected on5.1-BETA2 or 4.8

Thu May 22 10:52:13 PDT 2003

This is a Supermicro X5DL8-GG motherboard (ServerWorks GC-LE chipset) in a
Supermicro 7403L-8R box, with what they claim are onboard Broadcom 5703
GigE ifs. OS set to Other in BIOS (latest ver), ACPI/Hyperthreading on.

pciconf -l:

hostb0 at pci0:0:0:        class=0x060000 card=0x348015d9 chip=0x254c8086
rev=0x01 hdr=0x00
none0 at pci0:0:1: class=0xff0000 card=0x348015d9 chip=0x25418086 rev=0x01
hdr=0x00
pcib1 at pci0:2:0: class=0x060400 card=0x00000000 chip=0x25438086 rev=0x01
hdr=0x01
pcib4 at pci0:3:0: class=0x060400 card=0x00000000 chip=0x25458086 rev=0x01
hdr=0x01
uhci0 at pci0:29:0:        class=0x0c0300 card=0x348015d9 chip=0x24828086
rev=0x02 hdr=0x00
uhci1 at pci0:29:1:        class=0x0c0300 card=0x348015d9 chip=0x24848086
rev=0x02 hdr=0x00
uhci2 at pci0:29:2:        class=0x0c0300 card=0x348015d9 chip=0x24878086
rev=0x02 hdr=0x00
pcib7 at pci0:30:0:        class=0x060400 card=0x00000000 chip=0x244e8086
rev=0x42 hdr=0x01
isab0 at pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24808086
rev=0x02 hdr=0x00
atapci0 at pci0:31:1:      class=0x01018a card=0x348015d9 chip=0x248b8086
rev=0x02 hdr=0x00
none1 at pci0:31:3:        class=0x0c0500 card=0x348015d9 chip=0x24838086
rev=0x02 hdr=0x00
none2 at pci1:28:0:        class=0x080020 card=0x348015d9 chip=0x14618086
rev=0x04 hdr=0x00
pcib2 at pci1:29:0:        class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
none3 at pci1:30:0:        class=0x080020 card=0x348015d9 chip=0x14618086
rev=0x04 hdr=0x00
pcib3 at pci1:31:0:        class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
ahd0 at pci2:1:0:  class=0x010000 card=0x00409005 chip=0x80109005 rev=0x03
hdr=0x00
ahd1 at pci2:1:1:  class=0x010000 card=0x00409005 chip=0x80109005 rev=0x03
hdr=0x00
em0 at pci3:1:0:   class=0x020000 card=0x11078086 chip=0x10088086 rev=0x02
hdr=0x00
em1 at pci3:2:0:   class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01
hdr=0x00
em2 at pci3:2:1:   class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01
hdr=0x00
none4 at pci4:28:0:        class=0x080020 card=0x348015d9 chip=0x14618086
rev=0x04 hdr=0x00
pcib5 at pci4:29:0:        class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
none5 at pci4:30:0:        class=0x080020 card=0x348015d9 chip=0x14618086
rev=0x04 hdr=0x00
pcib6 at pci4:31:0:        class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
twe0 at pci5:1:0:  class=0x010400 card=0x100113c1 chip=0x100113c1 rev=0x01
hdr=0x00
ahd2 at pci6:2:0:  class=0x010000 card=0x005e9005 chip=0x801d9005 rev=0x10
hdr=0x00
ahd3 at pci6:2:1:  class=0x010000 card=0x005e9005 chip=0x801d9005 rev=0x10
hdr=0x00
none6 at pci7:1:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27
hdr=0x00

dmesg:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA2 #0: Tue May 20 16:08:27 GMT 2003
    root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc071b000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc071b2e4.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 2399327112 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073217536 (1023 MB)
avail memory = 1034964992 (987 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 29 entries at 0xc00fddf0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pci2: <ACPI PCI bus> on pcib2
ahd0: <Adaptec 39320 Ultra320 SCSI adapter> port
0x3000-0x30ff,0x3400-0x34ff mem 0xfb200000-0xfb201fff irq 12 at device 1.0
on pci2
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec 39320 Ultra320 SCSI adapter> port
0x3800-0x38ff,0x3c00-0x3cff mem 0xfb202000-0xfb203fff irq 12 at device 1.1
on pci2
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port
0x4080-0x409f mem 0xfb300000-0xfb31ffff,0xfb320000-0xfb33ffff irq 12 at
device 1.0 on pci3
em0:  Speed:100 Mbps  Duplex:Full
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port
0x4000-0x403f mem 0xfb340000-0xfb35ffff irq 12 at device 2.0 on pci3
em1:  Speed:N/A  Duplex:N/A
em2: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port
0x4040-0x407f mem 0xfb360000-0xfb37ffff irq 12 at device 2.1 on pci3
em2:  Speed:N/A  Duplex:N/A
pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.HLC_ -
AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib4
pci4: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci4
pci5: <ACPI PCI bus> on pcib5
twe0: <3ware Storage Controller> port 0x5000-0x500f mem
0xfb800000-0xfbffffff,0xfb500000-0xfb50000f irq 11 at device 1.0 on pci5
twe0: 4 ports, Firmware FE7X 1.05.00.036, BIOS BE7X 1.08.00.044
pci4: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4
pci6: <ACPI PCI bus> on pcib6
ahd2: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x6000-0x60ff,0x6400-0x64ff mem 0xfc000000-0xfc001fff irq 11 at device 2.0
on pci6
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd3: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x6800-0x68ff,0x6c00-0x6cff mem 0xfc002000-0xfc003fff irq 11 at device 2.1
on pci6
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f
irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f
irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f
irq 5 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port
0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem
0xe0000-0xe3fff,0xdc000-0xdffff,0xc9000-0xc9fff,0xc8000-0xc8fff,0xc0000-0xc7fff
on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
twed0: <TwinStor, Normal> on twe0
twed0: 38165MB (78163312 sectors)
twe0: command interrupt
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ses0 at ahd2 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
ses1 at ahd3 bus 0 target 6 lun 0
ses1: <SUPER GEM318 0> Fixed Processor SCSI-2 device
ses1: 3.300MB/s transfers
ses1: SAF-TE Compliant Device
da0 at ahd1 bus 0 target 0 lun 0
da0: <Promise 8 Disk RAID5 1.10> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 400543MB (820312192 512 byte sectors: 255H 63S/T 51062C)
Mounting root from ufs:/dev/twed0s1a

At least the three Intel GigE cards work fine. If you need patches tested
or more info then please let me know.

regards,
John