firewire problem on 5.1-RELEASE

Petr Holub hopet at ics.muni.cz
Mon Jul 14 10:39:37 PDT 2003


Hi guys,

there's some new bug in firewire driver in 5.1-RELASE.
When I connect camera to ma Dell Precision 530 box
via firewire I get following messages:

fwohci0: BUS reset
fwohci0: node_id=0x0800ffc0, gen=37, Bus reset failure
fwohci0: node_id=0x8800ffc0, gen=77, non CYCLEMASTER mode
fwohci0: SID Error
fwohci0: phy int
fwohci0: node_id=0x8800ffc0, gen=197, non CYCLEMASTER mode
fwohci0: SID Error
fwohci0: phy int
fwohci0: node_id=0x8800ffc0, gen=61, non CYCLEMASTER mode
fwohci0: SID Error
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=181, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=5, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=85, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=165, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=245, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=68, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=148, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=228, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=52, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0800ffc0, gen=132, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0xc800ffc0, gen=172, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
fwohci0: BUS reset
fwohci0: node_id=0x8800ffc0, gen=174, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
firewire0: root node is not cycle master capable
firewire0: bus manager 0 (me)
fwohci0: BUS reset
fwohci0: node_id=0x8800ffc0, gen=174, non CYCLEMASTER mode
fw_xfer_done: pending
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
firewire0: root node is not cycle master capable
firewire0: bus manager 0 (me)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=175, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fw_attach_dev: 1 pending handlers called
fwohci0: BUS reset
fwohci0: node_id=0x8800ffc0, gen=177, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1
fwohci0: BUS reset
fwohci0: node_id=0x8800ffc0, gen=177, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1
firewire0: bus manager 0 (me)
firewire0: New S100 device ID:000085000064790a

After this when I try to read from camera I get following:

fwohci0: IR DMA overrun (0x40008011)
fwohci0: IR DMA overrun (0x40008011)
fwohci0: IR DMA overrun (0x40008011)
fwohci0: IR DMA overrun (0x40008011)

Can anybody help me? It used to work in 5.0-RELEASE so I suppose
it to be a new bug.

Thanks,
Petr

PS: Keep me in Cc: of your answer since I'm not a list member and
I won't be able to react promptly otherwise.

P.

================================================================
                            Petr Holub
CESNET z.s.p.o.                       Supercomputing Center Brno
Zikova 4                             Institute of Compt. Science
162 00 Praha 6, CZ                            Masaryk University
Czech Republic                     Botanicka 68a, 60200 Brno, CZ 
e-mail: Petr.Holub at cesnet.cz               phone: +420-541512213
                                             fax: +420-541212747
                                       e-mail: hopet at ics.muni.cz





More information about the freebsd-current mailing list