Atheros problems on IBM R40

[Brock Williams]

I just updated to CURRENT from 5.1 today (7/2/03), anxious to see if the 
new Atheros driver would work on my IBM R40.  The driver probes and 
recognizes the chipset in my laptop, but fails.  I've included the error 
message and an pciconf -lv as well.

I realize this is brand-new, but thought some more experiences may help. 
   I'm happy to help test or debug or whatever!

Thanks!

Brock


ath0: <Atheros 5211> mem 0xc0201000-0xc0210fff irq 11 at device 2.0 on pci2
ath_hal_wait: timeout on reg 0x4000: 0x49430313 & 0x00000003 != 0x00000000
ath0: unable to attach hardware; HAL status 3
device_probe_and_attach: ath0 attach returned 6
ath0: <Atheros 5211> mem 0xc0201000-0xc0210fff irq 11 at device 2.0 on pci2
ath_hal_wait: timeout on reg 0x4000: 0x49430313 & 0x00000003 != 0x00000000
ath0: unable to attach hardware; HAL status 3
device_probe_and_attach: ath0 attach returned 6
ath0: <Atheros 5211> mem 0xc0201000-0xc0210fff irq 11 at device 2.0 on pci2
ath_hal_wait: timeout on reg 0x4000: 0x49430313 & 0x00000003 != 0x00000000
ath0: unable to attach hardware; HAL status 3
device_probe_and_attach: ath0 attach returned 6
ath0: <Atheros 5211> mem 0xc0201000-0xc0210fff irq 11 at device 2.0 on pci2
ath_hal_wait: timeout on reg 0x4000: 0x49430313 & 0x00000003 != 0x00000000
ath0: unable to attach hardware; HAL status 3
device_probe_and_attach: ath0 attach returned 6



pciconf -lv:

none3 at pci2:2:0: class=0x020000 card=0x831017ab chip=0x0012168c rev=0x01 
hdr=0x00
     vendor   = 'Atheros Communications Inc.'
     class    = network
     subclass = ethernet