new interrupts not working for me

[John Baldwin]

On 22-Dec-2003 Peter Schultz wrote:
> John Baldwin wrote:
>> On 05-Nov-2003 Peter Schultz wrote:
>> 
>>>I have a Tyan S1832DL w/dual pii 350s and it's not able to boot.  Seems 
>>>to be having trouble with my adaptec scsi controller, I get a whole 
>>>bunch of output like this hand transcribed bit, it comes after "waiting 
>>>15 seconds for scsi devices to settle":
>>>
>>>ahc0 timeout SCB already complete interrupts may not be functioning
>>>Infinite interrupt loop INTSTAT=0(probe3:ahc0:0:3:0): SCB 0x6 - timed out
>>>
>>>Anyone else seeing this?  There are probably 100+ related lines of 
>>>output, I'll have to configure serial debugging if you need to see it.
>> 
>> 
>> The dmesg output excluding all the ahc0 errors would help figure out
>> why your interrupts aren't working.  However, I just committed a patch
>> that might fix your problem.
>> 
> Here is the output I was able to capture:

Disable ACPI for now.  It looks like you have a buggy BIOS.
Can you put your ASL up at a URL somewhere?

-- 

John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve!"  -  http://www.FreeBSD.org/