cbb still don't work?

[Sergey A. Osokin]

Hello,
I tried to use
device          cbb
device          pccard
device          cardbus
instead of
device         pcic
device         card    1

but it still do not works for my HP Omnibook 6100.
....
FreeBSD 5.2-CURRENT #0: Tue Dec  9 17:11:40 MSK 2003
....
cbb0: <TI1420 PCI-CardBus Bridge> at device 5.0 on pci2
start (88000000) < sc->membase (d0200000)
end (ffffffff) > sc->memlimit (d02fffff)
pcib2: device cbb0 requested decoded memory range 0x88000000-0xffffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.5.INTA (source \\_SB_.LNKA)
pcib2: slot 5 INTA is routed to irq 10
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac51104c 0x02100007 0x06070000 0x00822000 
  0x10: 0x88000000 0x020000a0 0x20000000 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010a 
  0x40: 0x001a103c 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00c4b061 0x00000000 0x00000000 0x012c1272 
  0x90: 0x416682c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe420001 0x00c00000 0x00000001 0x0000001f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1420 PCI-CardBus Bridge> at device 5.1 on pci2
start (88000000) < sc->membase (d0200000)
end (ffffffff) > sc->memlimit (d02fffff)
pcib2: device cbb1 requested decoded memory range 0x88000000-0xffffffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.5.INTB (source \\_SB_.LNKB)
pcib2: slot 5 INTB is routed to irq 10
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0xac51104c 0x02100007 0x06070000 0x00822000 
  0x10: 0x88001000 0x020000a0 0x20000000 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020a 
  0x40: 0x001a103c 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00c49061 0x00000000 0x00000000 0x012c1272 
  0x90: 0x416682c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe420001 0x00c00000 0x00000001 0x0000001f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
....
pcib2: device pccard0 requested decoded memory range 0x88000000-0xffffffff
CIS is too long -- truncating
pccard0: Card has no functions!
cbb0: PC Card card activation failed
....

Any idea?
Thanks.

P.S. Full dmesg verbose boot available at http://ozz.pp.ru/dmesg-cbb.txt
-- 

Rgdz,                        /"\  ASCII RIBBON CAMPAIGN
Sergey Osokin aka oZZ,       \ /    AGAINST HTML MAIL
http://ozz.pp.ru/             X          AND NEWS
                             / \