PATCH - acpica-20031203

[Brooks Davis]

On Mon, Dec 08, 2003 at 09:47:51AM -0800, Nate Lawson wrote:
> I've built and run the latest ACPI-CA dist and it looks pretty good.  It
> has a lot of fixes from FreeBSD as well as Linux.  Please give it a try
> and let me know if it gives you any new problems.
> 
>     http://www.root.org/~nate/freebsd/acpica-20031203.diff.gz

This fixes the onboard nics on my Intel SE7500SW2.  Thanks!  I've
included a dmesg below.

-- Brooks

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #8: Mon Dec  8 13:11:28 PST 2003
    root at fellow.sea.one-eyed-alien.net:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a81000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a81244.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) CPU 2.20GHz (2193.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
  Hyperthreading: 2 logical CPUs
real memory  = 1073676288 (1023 MB)
avail memory = 1033494528 (985 MB)
ACPI APIC Table: <INTEL  SWV20   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
lapic0: Forcing LINT1 to edge trigger
Pentium Pro MTRR support enabled
    ACPI-0671: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [GPEN] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [GPST] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [SBID] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0671: *** Warning: Type override - [SWCE] had invalid type (String) for Scope operator, changed to (Scope)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL  SWV20   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 19 entries at 0xc00f3060
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P5 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib1
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci4: <ACPI PCI bus> on pcib2
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x2040-0x207f mem 0xfeac0000-0xfeadffff irq 30 at device 7.0 on pci3
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x2000-0x203f mem 0xfeae0000-0xfeafffff irq 31 at device 7.1 on pci3
em1:  Speed:N/A  Duplex:N/A
pci0: <unknown> at device 3.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x3020-0x303f irq 16 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x3000-0x301f irq 19 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
atapci0: <Promise PDC20277 UDMA133 controller> port 0x1420-0x142f,0x140c-0x140f,0x1410-0x1417,0x1408-0x140b,0x1400-0x1407 mem 0xfe9e0000-0xfe9e3fff irq 18 at device 2.0 on pci1
atapci0: [MPSAFE]
ata2: at 0x1400 on atapci0
ata2: [MPSAFE]
ata3: at 0x1410 on atapci0
ata3: [MPSAFE]
pci1: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH3 UDMA100 controller> port 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
acpi_ec0: <Embedded Controller: GPE 0x8> port 0xca7,0xca6 on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc69ff760
ad0: 39266MB <IC35L040AVVA07-0> [79780/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4
GEOM: create disk ad6 dp=0xc69ff160
ad6: 78533MB <IC35L080AVVA07-0> [159560/16/63] at ata3-master UDMA100
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/ad0s1a
em1: Link is up 1000 Mbps Full Duplex
em0: Link is up 1000 Mbps Full Duplex
em0: Link is up 1000 Mbps Full Duplex

-- 
Any statement of the form "X is the one, true Y" is FALSE.
PGP fingerprint 655D 519C 26A7 82E7 2529  9BF0 5D8E 8BE9 F238 1AD4
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20031208/f05be991/attachment.bin