dev/em: Link is not up until 2 seconds after "ifconfig up"

[Jun Kuriyama]

At Sun, 7 Dec 2003 15:04:51 +0600 (NOVT),
Maxim M. Kazachek wrote:
> 	Did you tried to specify link speed rather than use autosence.
> Perhaps this delay is due to media sense?

Hmm, no luck.  I've fixed the speed and mediaopt both of em(4) and
switch, but it shows autoselect state and no carrier...


em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=3<RXCSUM,TXCSUM>
        inet 192.168.128.3 netmask 0xffffff00 broadcast 192.168.128.255
        inet6 fe80::230:48ff:fe28:4d75%em1 prefixlen 64 scopeid 0x2 
        ether 00:30:48:28:4d:75
        media: Ethernet 100baseTX <full-duplex> (autoselect)
        status: no carrier
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=3<RXCSUM,TXCSUM>
        inet 192.168.128.3 netmask 0xffffff00 broadcast 192.168.128.255
        inet6 fe80::230:48ff:fe28:4d75%em1 prefixlen 64 scopeid 0x2 
        ether 00:30:48:28:4d:75
        media: Ethernet 100baseTX <full-duplex> (autoselect)
        status: no carrier
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=3<RXCSUM,TXCSUM>
        inet 192.168.128.3 netmask 0xffffff00 broadcast 192.168.128.255
        inet6 fe80::230:48ff:fe28:4d75%em1 prefixlen 64 scopeid 0x2 
        ether 00:30:48:28:4d:75
        media: Ethernet 100baseTX <full-duplex>
        status: active


-- 
Jun Kuriyama <kuriyama at imgsrc.co.jp> // IMG SRC, Inc.
             <kuriyama at FreeBSD.org> // FreeBSD Project