/usr/ports/xll/XFree86-4

Jamie Bowden ragnar at sysabend.org
Tue Dec 2 08:51:39 PST 2003


I have a new machine that I've just installed 5.1-R on, and cvsup'd to -C.
I'm attempting to build X, and am getting a core dump from rman during the
process.

Jamie Bowden

-- 
"It was half way to Rivendell when the drugs began to take hold"
Hunter S Tolkien "Fear and Loathing in Barad Dur"
Iain Bowen <alaric at alaric.org.uk>

-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #0: Tue Dec  2 06:29:23 EST 2003
    jamie at ghast:/usr/obj/usr/src/sys/ghast
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08db000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1700MHz (1698.57-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 1073405952 (1023 MB)
avail memory = 1033252864 (985 MB)
Pentium Pro MTRR support enabled
acpi0: <DELL   CPi R  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fc590
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 11
pcib0: slot 29 INTC is routed to irq 11
pcib0: slot 29 INTD is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
agp0: <Intel 82855 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 11
pcib2: slot 1 INTA is routed to irq 11
pcib2: slot 1 INTA is routed to irq 11
pcib2: slot 3 INTA is routed to irq 11
bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3001> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
bge0: Ethernet address: 00:0d:56:aa:6d:42
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci2
start (30000000) < sc->membase (f6000000)
end (ffffffff) > sc->memlimit (fbffffff)
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: slot 1 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb1: <PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
start (30000000) < sc->membase (f6000000)
end (ffffffff) > sc->memlimit (fbffffff)
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
fwohci0: vendor=104c, dev=802b
fwohci0: <1394 Open Host Controller Interface> mem 0xfafe8000-0xfafebfff,0xfafef800-0xfafeffff irq 11 at device 1.2 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 32:4f:c0:00:3a:f8:e0:61
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:f8:e0:61
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <base peripheral> at device 1.3 (no driver attached)
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1698567976 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cpu0: Performance states changed
cbb0: Unsupported card type detected
cbb1: Unsupported card type detected
GEOM: create disk ad0 dp=0xc6a78160
ad0: 38154MB <FUJITSU MHT2040AH> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <QSI CD-RW/DVD-ROM SBW-242> at ata1-master UDMA33
ums0: at uhub0 port 1 (addr 2) disconnected
ums0: detached
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Mounting root from ufs:/dev/ad0s3a
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
pid 5815 (rman), uid 0: exited on signal 11 (core dumped)
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
pid 5917 (rman), uid 0: exited on signal 11 (core dumped)
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
pid 6049 (rman), uid 0: exited on signal 11 (core dumped)
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
pid 6152 (rman), uid 0: exited on signal 11 (core dumped)
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
pid 12754 (rman), uid 0: exited on signal 11 (core dumped)
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
cbb1: Unsupported card type detected
-------------- next part --------------
machine		i386
cpu		I686_CPU	#aka Pentium Pro(tm)
ident		ghast
options		INCLUDE_CONFIG_FILE	#Include this file in kernel
options		SCHED_4BSD
options		ADAPTIVE_MUTEXES
options		INET		#InterNETworking
options		INET6		#IPv6 communications protocols
options		IPSEC		#IP security
options		IPSEC_ESP	#IP security (crypto; define w/ IPSEC)
options		FFS		#Berkeley Fast Filesystem
options		SOFTUPDATES	#Enable FFS soft updates support
options		PROCFS		#Process filesystem (requires PSEUDOFS)
options		PSEUDOFS	#Pseudo-filesystem framework
options		COMPAT_43	#Compatible with BSD 4.3 [KEEP THIS!]
options		COMPAT_FREEBSD4		#Compatible with FreeBSD4
options         SCSI_DELAY=8000		#Delay (in ms) before probing SCSI
options		SYSVSHM		#SYSV-style shared memory
options		SYSVMSG		#SYSV-style message queues
options		SYSVSEM		#SYSV-style semaphores
options		_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options		KBD_INSTALL_CDEV	#install a CDEV entry in /dev
#options		SMP		#Symmetric MultiProcessor Kernel
#options		APIC_IO		#Symmetric (APIC) I/O
device		isa
device		pci
device		ata
device		atadisk		#ATA disk drives
device		atapicd		#ATAPI CDROM drives
device		atapifd		#ATAPI floppy drives
device		atapist		#ATAPI tape drives
options		ATA_STATIC_ID	#Static device numbering
device		ahc		#AHA2940 and onboard AIC7xxx devices
options		AHC_ALLOW_MEMIO
device		scbus		#SCSI bus (required)
device		ch		#SCSI media changers
device		da		#Direct Access (disks)
device		sa		#Sequential Access (tape etc)
device		cd		#CD
device		pass		#Passthrough device (direct SCSI access)
device		ses		#SCSI Environmental Services (and SAF-TE)
device		atkbdc		#AT keyboard controller
device		atkbd		#AT keyboard
device		psm		#PS/2 mouse
device		vga		#VGA video card driver
device		splash		#Splash screen and screen saver support
device		sc
device		agp		#support several AGP chipsets
device		npx
device		acpi
device		apm
device		sio		#8250, 16[45]50 based serial ports
device		ppc
device		ppbus		#Parallel port bus (required)
device		lpt		#Printer
device		plip		#TCP/IP over parallel
device		ppi		#Parallel port interface device
device		vpo		#Requires scbus and da
device		miibus		#MII bus support
device		fxp		#Intel EtherExpress PRO/100B (82557, 82558)
device		xl		#3Com 3c90x (``Boomerang'', ``Cyclone'')
device		bge		#Broadcom BCM570xx Gigabit Ethernet
device		pcm
device		midi
device		seq
device		joy
device		bktr
options		OVERRIDE_TUNER=1
options		BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
device		smbus		#Bus support, required for smb below.
device		ichsmb
device		iicbus
device		iicbb
device		iicsmb
device		random		#Entropy device
device		loop		#Network loopback
device		ether		#Ethernet support
device		ppp		#Kernel PPP
options		PPP_BSDCOMP	#PPP BSD-compress support
options		PPP_DEFLATE	#PPP zlib/deflate/gzip support
device		tun		#Packet tunnel.
device		pty		#Pseudo-ttys (telnet etc)
device		gif		#IPv6 and IPv4 tunneling
device		faith		#IPv6-to-IPv4 relaying (translation)
device		stf		#6to4 IPv6 over IPv4 encapsulation
device		bpf		#Berkeley packet filter
device		cbb		#Cardbus (yenta) bridge
device		pccard		#PC Card (16-bit) bus
device		cardbus		#CardBus (32-bit) bus
device		uhci		#UHCI PCI->USB interface
device		ohci		#OHCI PCI->USB interface
device		ehci
device		usb		#USB Bus (required)
device		ugen		#Generic
device		uhid		#"Human Interface Devices"
device		ukbd		#Keyboard
device		ulpt		#Printer
device		umass		#Disks/Mass storage - Requires scbus and da
device		ums		#Mouse
device		urio		#Diamond Rio 500 MP3 player
device		uscanner	#Scanners
device		firewire	#FireWire bus code
device		sbp		#SCSI over FireWire (Requires scbus and da)
device		fwe		#Ethernet over FireWire (non-standard!)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: foo
Type: application/octet-stream
Size: 198424 bytes
Desc: make
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20031202/b6434959/foo-0001.obj


More information about the freebsd-current mailing list