<VIA 82C686B UDMA100 controller> port 0xd800-0xd80f at device 7.1 on pci0

[Doug White]

On Sun, 3 Aug 2003, ryan chris wrote:

>
> with dma enabled, a sysinstall will only work under the minimal install,
> and after a certain point, apparently using too much hard drive space
> (showed up with a tar
> -xvf ports.tar) causes a panic with anic errors

Have you tried replacing the IDE cable(s)? I've seen panics and other
erratic behavior due to bad cables, or a defective 60 pin cable, or even a
30 pin cable that somehow got detected as a 60 pin.

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite at gumbysoft.com          |  www.FreeBSD.org