nvidia-driver not loading GLX.

Alastair G. Hogge agh at tpg.com.au
Sun Aug 3 07:01:26 PDT 2003


Hello list,

I'm having some problems getting 3D support on my Ti4800SE.
I've built nvidia-driver-1.0.4365 with WITH_NVIDIA_HACKS and without. I've 
used and not used the FreeBSD agp module. but I keep getting the same error 
when I try to start X with the loading the glx module.

Attached is my dmesg output, /var/log/XFree86.0.log and my X config.

uname -a returns:
FreeBSD nova 5.1-CURRENT FreeBSD 5.1-CURRENT #3: Fri Aug  1 01:16:29 EST 2003     
agh at nova:/usr/obj/usr/src/sys/NOVA  i386

X loads up fine when I comment out 'Load  "glx"'.

Also I get "Bus error (core dumped)" with some programs, mplayer for one.

Anyways some help would be much appreciated
-Al
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #3: Fri Aug  1 01:16:29 EST 2003
    agh at nova:/usr/obj/usr/src/sys/NOVA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06da000.
Preloaded elf module "/boot/modules/vesa.ko" at 0xc06da244.
Preloaded elf module "/boot/modules/cd9660.ko" at 0xc06da2f0.
Preloaded elf module "/boot/modules/msdosfs.ko" at 0xc06da39c.
Preloaded elf module "/boot/modules/procfs.ko" at 0xc06da44c.
Preloaded elf module "/boot/modules/pseudofs.ko" at 0xc06da4f8.
Preloaded elf module "/boot/modules/md.ko" at 0xc06da5a8.
Preloaded elf module "/boot/modules/linux.ko" at 0xc06da650.
Preloaded elf module "/boot/modules/sysvshm.ko" at 0xc06da6fc.
Preloaded elf module "/boot/modules/sysvsem.ko" at 0xc06da7ac.
Preloaded elf module "/boot/modules/sysvmsg.ko" at 0xc06da85c.
Preloaded elf module "/boot/modules/if_ppp.ko" at 0xc06da90c.
Preloaded elf module "/boot/modules/if_tun.ko" at 0xc06da9b8.
Preloaded elf module "/boot/modules/miibus.ko" at 0xc06daa64.
Preloaded elf module "/boot/modules/if_rl.ko" at 0xc06dab10.
Preloaded elf module "/boot/modules/ng_bpf.ko" at 0xc06dabbc.
Preloaded elf module "/boot/modules/netgraph.ko" at 0xc06dac68.
Preloaded elf module "/boot/modules/ng_ether.ko" at 0xc06dad18.
Preloaded elf module "/boot/modules/ng_ppp.ko" at 0xc06dadc8.
Preloaded elf module "/boot/modules/snd_pcm.ko" at 0xc06dae74.
Preloaded elf module "/boot/modules/snd_emu10k1.ko" at 0xc06daf24.
Preloaded elf module "/boot/modules/usb.ko" at 0xc06dafd8.
Preloaded elf module "/boot/modules/uhid.ko" at 0xc06db084.
Preloaded elf module "/boot/modules/ukbd.ko" at 0xc06db130.
Preloaded elf module "/boot/modules/ums.ko" at 0xc06db1dc.
Preloaded elf module "/boot/modules/umass.ko" at 0xc06db288.
Preloaded elf module "/boot/modules/random.ko" at 0xc06db334.
Preloaded elf module "/boot/modules/linprocfs.ko" at 0xc06db3e0.
Preloaded elf module "/boot/modules/firewire.ko" at 0xc06db490.
Preloaded elf module "/boot/modules/fdc.ko" at 0xc06db540.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc06db5ec.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc06db698.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 2533056136 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2533.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536854528 (511 MB)
avail memory = 514031616 (490 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 131072k memory, flags:0x1, mode table:0xc0376c62 (1000022)
VESA: NVIDIA
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   P4S8X   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f1720
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 3 INTA is routed to irq 9
pcib0: slot 3 INTB is routed to irq 9
pcib0: slot 3 INTC is routed to irq 9
pcib0: slot 14 INTA is routed to irq 11
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce4 Ti 4800 SE> mem 0xf0000000-0xf7ffffff,0xdf000000-0xdfffffff irq 11 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
fwohci0: vendor=1039, dev=7007
fwohci0: <1394 Open Host Controller Interface> mem 0xde800000-0xde800fff at device 2.3 on pci0
pcib0: slot 2 INTB is routed to irq 5
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:0a:83:4c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
atapci0: <SiS 963 UDMA133 controller> port 0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 irq 11 at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xde000000-0xde000fff irq 9 at device 3.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: KYE Genius USB Wheel Mouse, rev 1.00/2.42, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
ohci1: <SiS 5571 USB controller> mem 0xdd800000-0xdd800fff irq 9 at device 3.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xdd000000-0xdd000fff irq 9 at device 3.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdc800000-0xdc800fff at device 3.3 on pci0
pcib0: slot 3 INTD is routed to irq 5
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcm0: <Creative EMU10K1> port 0x9400-0x941f at device 9.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
pcib0: slot 9 INTA is routed to irq 5
rl0: <RealTek 8139 10/100BaseTX, rev. C> port 0x8800-0x88ff mem 0xdb800000-0xdb8000ff at device 10.0 on pci0
pcib0: slot 10 INTA is routed to irq 11
rl0: Ethernet address: 00:50:bf:77:3c:97
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise PDC20376 SATA150 controller> port 0x7800-0x787f,0x8000-0x800f,0x8400-0x843f mem 0xda800000-0xda81ffff,0xdb000000-0xdb000fff irq 11 at device 14.0 on pci0
ata2: at 0xdb000000 on atapci1
ata3: at 0xdb000000 on atapci1
ata4: at 0xdb000000 on atapci1
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xd0000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA133
acd0: CD-RW <SONY CD-RW CRX175E> at ata1-master WDMA2
Mounting root from ufs:/dev/ad0s2a
ums0: at uhub0 port 2 (addr 2) disconnected
ums0: detached
ums0: KYE Genius USB Wheel Mouse, rev 1.00/2.42, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
pid 577 (XFree86), uid 0: exited on signal 6
pid 736 (glxinfo), uid 1000: exited on signal 10 (core dumped)
pid 737 (mplayer), uid 1000: exited on signal 10 (core dumped)
pid 856 (XFree86), uid 0: exited on signal 6 (core dumped)
-------------- next part --------------
Section "ServerLayout"
	Identifier	"Main Layout"
	Screen		0 "Screen0" 0 0	
	InputDevice	"Mouse0"	"CorePointer"
	InputDevice	"Keyboard0"	"CoreKeyboard"
EndSection

Section "Files"
	RgbPath		"/usr/X11R6/lib/X11/rgb"
	ModulePath	"/usr/X11R6/lib/modules"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc/"
	FontPath	"/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath	"/usr/X11R6/lib/X11/fonts/CID/"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/"
	FontPath	"/usr/X11R6/lib/X11/fonts/webfonts"
	FontPath	"/usr/X11R6/lib/X11/fonts/PEX"
	FontPath	"/usr/X11R6/lib/X11/fonts/TTF"
	FontPath	"/usr/X11R6/lib/X11/fonts/Xg"
	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath	"/usr/X11R6/lib/X11/fonts/encodings"
	FontPath	"/usr/X11R6/lib/X11/fonts/jmk"
	FontPath	"/usr/X11R6/lib/X11/fonts/latin2"
        FontPath	"/usr/X11R6/lib/X11/fonts/local"
	FontPath	"/usr/X11R6/lib/X11/fonts/util"
EndSection

Section "Module"
	Load  "bitmap"
	Load  "extmod"
	#Load  "glx"
	Load  "dbe"
	Load  "type1"
	Load  "freetype"
EndSection

Section "InputDevice"
	Identifier	"Keyboard0"
	Driver		"keyboard"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol"		"auto"
        Option      "Device"		"/dev/sysmouse"
        Option      "Buttons"		"7"
        Option      "ZAxisMapping"	"4 5"
EndSection

Section "Monitor"
	DisplaySize	  330   240	# mm
	Identifier   "Monitor0"
	VendorName   "SNY"
	ModelName    "CPD-E220"
	HorizSync    30.0 - 85.0
	VertRefresh  48.0 - 120.0
EndSection

Section "Device"
	Identifier	"ati0"
	Driver		"radeon"
	VendorName	"ATI Technologies Inc"
	BoardName	"Radeon R300 ND [Radeon 9700]"
	BusID		"PCI:1:0:0"
EndSection

Section "Device"
	Identifier	"nv0"
	Driver		"nvidia"
	VendorName	"nVidia Corporation"
	BoardName	"NV28 [GeForce4 Ti 4800 SE]"
	Option 		"NvAgp" "1"
	BusID		"PCI:1:0:0"
EndSection

Section "Screen"
	Identifier	"Screen0"
	Device		"nv0"
	Monitor		"Monitor0"
	DefaultDepth	24
 	SubSection	"Display"
		Depth     32
		Modes     "1280x1024" "1024x768" "800x600" "640x480" "640x400" "320x240" "320x200"
	EndSubSection
	SubSection "Display"
		Depth     24
                Modes     "1280x1024" "1024x768" "800x600" "640x480" "640x400" "320x240" "320x200"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes     "1280x1024" "1024x768" "800x600" "640x480" "640x400" "320x240" "320x200" "256x224"
	EndSubSection
	SubSection "Display"
		Depth     15
                Modes    "1280x1024" "1024x768" "800x600" "640x480" "640x400" "320x240" "320x200"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes      "1280x1024" "1024x768" "800x600" "640x480" "640x400" "320x240" "320x200"
	EndSubSection
	SubSection "Display"
		Depth     4
                Modes    "1280x1024" "1024x768" "800x600" "640x480" "640x400" "320x240" "320x200"
	EndSubSection
	SubSection "Display"
               Depth     1
               Modes    "1280x1024" "1024x768" "800x600" "640x480" "640x400" "320x240" "320x200"
	EndSubSection
EndSection

Section "DRI"
	Mode 0666
EndSection


More information about the freebsd-current mailing list