usb cf reader
Riccardo Torrini
riccardo at torrini.org
Fri Apr 25 07:06:06 PDT 2003
On Fri, Apr 25, 2003 at 12:55:10AM +0200, Riccardo Torrini wrote:
Sorry for writing again, but crash happens just 5" after attaching
usb device. With console at 80x60 I was able to write more text:
(attaching usb CF reader)
# ls -l /dev/da*
crw-r----- 1 root operator 4, 20 Apr 25 02:47 /dev/da0
(nothing happens for 4/5 seconds)
umass0: Invalid CSW: sig 0x00001000 should be 0x53425355
umass0: Invalid CSW: sig 0x00001000 should be 0x53425355
umass0: Invalid CSW: sig 0x00001000 should be 0x53425355
umass0: Invalid CSW: sig 0x00001000 should be 0x53425355
(I think the 4 lines are because CF reader is a 7in1 reader which
can accept different media, CF, SM, SD, microDrive, and so on).
umass0: Invalid CSW: tag 31 should be 32
umass0: Invalid CSW: Synchronize cache failed, status == 0x4, \
scsi status == 0x0
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): ILLEGAL REQUEST asc:24,0
(da1:umass-sim0:0:0:1): Invalid field in CDB
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 22
Fatal trap 12: page fault while in kernel mode
cpuid = 0; lapic.id = 01000000
fault virtual address = 0x1c
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc0266b53
stack pointer = 0x10:0xd68dab5c
frame pointer = 0x10:0xd68dab74
code segment = base 0x0, limit 0xffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 2 (g_event)
trap number = 12
panic: page fault
cpuid = 0; lapic.id = 01000000
boot() called from cpu#0
syncing disk, buffers remaining: 35xx 35xx 35xx 35xx ... 35xx
giving up on (forgot to copy) buffers
Uptime 2h42m11s
pfs_vncache_unload(): 1 entries remaining
Terminating ACPI
What else can I do to help you? TIA.
--
Riccardo.
More information about the freebsd-current
mailing list