Fw: problem updating from 4.7 Stable do 5.0 Current

[Ventsislav Velkov]

Does anybody have an idea ?

----- Original Message ----- 
From: Ventsislav Velkov 
To: freebsd-current at FreeBSD.ORG 
Sent: Monday, March 31, 2003 2:15 PM
Subject: problem updating from 4.7 Stable do 5.0 Current


Hello all,

I have a problem updating one of our servers from 4.7Stable to 5.0Current.
It is a Compaq Proliant 7000 Server with 4 Xeons @500Mhz with 2MB L2 cache each.
I has a 4200 Compaq Smart Raid Controler with attached 3 U1 Storages. 
I update the src rebuild the world from updated src to 5.0Current, build a GENERIC kernel and installed it.
But after I boot it brokes up during the booting process with the following error:

//strip

Fatal trap 12: page fault while in kernel mode cpuid=0; lapic.id= 01000000
fault virtual address = 0x54
fault code = supervisor read, page not present
....
....
....
process eflags = interrupt enabled, resume, IOPL=0
current process = 4(g_down)
kernel: type12trap, code=0
Stopped at ida_construct_qcb+0xe3: movzbl 0x54(%eax),%eax

//strip

It may have some punctual mistakes because it is not a copy/paste.

Will appreciate any advices where could be the problem.

Best regards,

Veno
_______________________________________________
freebsd-current at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"