[Bug 222533] One HDD not seen by mps (11.1 regression)

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=222533

--- Comment #12 from Denis Polygalov <dpolyg at gmail.com> ---
Created attachment 193381
  --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=193381&action=edit
dmesg while dev.mps.0.debug_level set to 0x0203

Thanks for looking at this!

Here is what I got after updating firmware and BIOS on the 
SAS 9200-8e adapters to the stage 20 
and setting dev.mps.0.debug_level set to 0x0203 (dmesg attached).

Also, FYI:

# cat /boot/loader.conf
hw.mps.spinup_wait_time=10
dev.mps.0.debug_level=0x0203
kern.maxfiles="32768"
ipmi_load="YES"
geom_mirror_load="YES"
zfs_load="YES"
linux_load="YES"
linprocfs_load="YES"
linsysfs_load="YES"

# sysctl -a |grep "mps.0"
dev.mps.0.use_phy_num: 1
dev.mps.0.encl_table_dump:
dev.mps.0.mapping_table_dump:
dev.mps.0.spinup_wait_time: 10
dev.mps.0.chain_alloc_fail: 0
dev.mps.0.enable_ssu: 1
dev.mps.0.max_io_pages: -1
dev.mps.0.max_chains: 2048
dev.mps.0.chain_free_lowwater: 2008
dev.mps.0.chain_free: 2048
dev.mps.0.io_cmds_highwater: 154
dev.mps.0.io_cmds_active: 0
dev.mps.0.driver_version: 21.02.00.00-fbsd
dev.mps.0.firmware_version: 07.15.08.00
dev.mps.0.disable_msi: 0
dev.mps.0.disable_msix: 0
dev.mps.0.debug_level: 515
dev.mps.0.%parent: pci3
dev.mps.0.%pnpinfo: vendor=0x1000 device=0x0072 subvendor=0x1028
subdevice=0x1f1e class=0x010700
dev.mps.0.%location: slot=0 function=0 dbsf=pci0:3:0:0
dev.mps.0.%driver: mps
dev.mps.0.%desc: Avago Technologies (LSI) SAS2008

Regards,
Denis.

-- 
You are receiving this mail because:
You are the assignee for the bug.