[Bug 227904] boot fail with 20180426 RPI2 image
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Tue May 1 18:23:37 UTC 2018
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=227904
Bug ID: 227904
Summary: boot fail with 20180426 RPI2 image
Product: Base System
Version: CURRENT
Hardware: arm
OS: Any
Status: New
Severity: Affects Many People
Priority: ---
Component: kern
Assignee: bugs at FreeBSD.org
Reporter: bobf at mrp3.com
RPi2 20180426 image, as downloaded, fails to boot. This problem also appears
when kernel+world is installed from -CURRENT obtained on 4/27.
An earlier version, dated 03/29, was able to boot successfully on the same
hardware.
image file: FreeBSD-12.0-CURRENT-arm-armv7-RPI2-20180426-r333017.img
1. downloaded and transferred image to SD card with dd
2. booted SD card on RPi 2B with bcm2836 CPU
3. observed the following output on the serial port:
U-Boot 2018.03 (Apr 26 2018 - 16:58:25 +0000)
DRAM: 948 MiB
RPI 2 Model B (0xa01041)
MMC: sdhci at 7e300000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default
environment
Failed (-5)
In: serial
Out: vidconsole
Err: vidconsole
Net: No ethernet found.
starting USB...
USB0: Core Release: 2.80a
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
199 bytes read in 9 ms (21.5 KiB/s)
## Executing script at 02000000
238896 bytes read in 31 ms (7.3 MiB/s)
## Starting application at 0x01000000 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @0x3af56a90
FreeBSD/armv7 U-Boot loader, Revision 1.2
(Thu Apr 26 18:25:40 UTC 2018 root at releng3.nyi.freebsd.org)
DRAM: 948MB
Number of U-Boot devices: 1
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: disk
Probing all disk devices...
Checking unit=0 slice=<auto> partition=<auto>... good.
Booting from disk0s2a:
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x8bf97c+0x1dc684 syms=[0x4+0x99d30+0x4+0xdf5b5]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
/boot/dtb/bcm2836-rpi-2-b.dtb size=0x4c49
Loaded DTB from file 'bcm2836-rpi-2-b.dtb'.
Kernel entry at 0x1200100...
Kernel args: (null)
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r333017: Thu Apr 26 18:37:21 UTC 2018
root at releng3.nyi.freebsd.org:/usr/obj/usr/src/arm.armv7/sys/GENERIC arm
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM
6.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module_register: cannot register simplebus/ahci from kernel; already loaded
from kernel
Module simplebus/ahci failed to register: 17
module_register: cannot register simplebus/ehci from kernel; already loaded
from kernel
Module simplebus/ehci failed to register: 17
module_register: cannot register simplebus/pcib from kernel; already loaded
from kernel
Module simplebus/pcib failed to register: 17
module_register: cannot register simplebus/ehci from kernel; already loaded
from kernel
Module simplebus/ehci failed to register: 17
CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
CPU Features:
Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7,
PXN, LPAE, Coherent Walk
Optional instructions:
SDIV/UDIV, UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:3 LoUIS:2
Cache level 1:
32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory = 994045952 (947 MB)
avail memory = 955293696 (911 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
arc4random: no preloaded entropy cache
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on
simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: another root already set
intc0: could not set PIC as a root
device_attach: intc0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
gpio0: cannot allocate resources
gpio0: bcm_gpio_pic_detach: not implemented yet
device_attach: gpio0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
generic_timer0: could not allocate resources
device_attach: generic_timer0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
generic_timer0: could not allocate resources
device_attach: generic_timer0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
generic_timer0: could not allocate resources
device_attach: generic_timer0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
generic_timer0: could not allocate resources
device_attach: generic_timer0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
generic_timer0: could not allocate resources
device_attach: generic_timer0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
generic_timer0: could not allocate resources
device_attach: generic_timer0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
generic_timer0: could not allocate resources
device_attach: generic_timer0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
generic_timer0: could not allocate resources
device_attach: generic_timer0 attach returned 6
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq
9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24 on simplebus0
bcm_dma0: cannot allocate interrupt
device_attach: bcm_dma0 attach returned 6
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on
simplebus0
intc0: could not allocate memory resource
device_attach: intc0 attach returned 6
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0
bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 26 on
simplebus0
mbox0: could not allocate interrupt resource
device_attach: mbox0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,29,30
on simplebus0
device_attach: gpio0 attach returned 6
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 31 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 33 on
simplebus0
spi0: cannot allocate interrupt
device_attach: spi0 attach returned 6
iichb0: <BCM2708/2835 BSC controller> mem 0x7e205000-0x7e205fff irq 34 on
simplebus0
iichb0: cannot allocate interrupt
device_attach: iichb0 attach returned 6
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 41
on simplebus0
device_attach: sdhci_bcm0 attach returned 6
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 44 on
simplebus0
iichb0: cannot allocate interrupt
device_attach: iichb0 attach returned 6
iichb0: <BCM2708/2835 BSC controller> mem 0x7e805000-0x7e805fff irq 45 on
simplebus0
iichb0: cannot allocate interrupt
device_attach: iichb0 attach returned 6
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem
0x7e980000-0x7e98ffff irq 50 on simplebus0
bcm283x_dwcotg0: failed to set power state, err=6
device_attach: bcm283x_dwcotg0 attach returned 6
vchiq0: <BCM2835 VCHIQ> mem 0x7e00b840-0x7e00b84e irq 52 on simplebus0
vchiq0: could not allocate interrupt resource
device_attach: vchiq0 attach returned 6
fb0: <BCM2835 VT framebuffer driver> on simplebus0
device_attach: fb0 attach returned 6
pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0
pmu0: could not allocate resources
device_attach: pmu0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
generic_timer0: could not allocate resources
device_attach: generic_timer0 attach returned 6
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <ACT> failed to map pin
gpioled0: <PWR> failed to map pin
cryptosoft0: <software crypto>
panic: No usable event timer found!
cpuid = 0
time = 1
KDB: stack backtrace:
db_trace_self() at db_trace_self
pc = 0xc05e23a0 lr = 0xc00cf92c (db_trace_self_wrapper+0x30)
sp = 0xc0d13ce0 fp = 0xc0d13df8
db_trace_self_wrapper() at db_trace_self_wrapper+0x30
pc = 0xc00cf92c lr = 0xc02e3338 (vpanic+0x16c)
sp = 0xc0d13e00 fp = 0xc0d13e20
r4 = 0x00000100 r5 = 0x00000001
r6 = 0xc0771ef8 r7 = 0xc09cbfa8
vpanic() at vpanic+0x16c
pc = 0xc02e3338 lr = 0xc02e33d0 (kproc_shutdown)
sp = 0xc0d13e28 fp = 0xc0d13e2c
r4 = 0xc0a453b4 r5 = 0xc0a453d8
r6 = 0x00000001 r7 = 0xc0a4957c
r8 = 0x7fffffff r9 = 0xffffffff
r10 = 0xc2eb0d80
kproc_shutdown() at kproc_shutdown
pc = 0xc02e33d0 lr = 0xc061240c (timercb)
sp = 0xc0d13e34 fp = 0xc0d13e60
r4 = 0xc02e33d0 r5 = 0xc0d13e34
timercb() at timercb
pc = 0xc061240c lr = 0xc028307c (initclocks+0x2c)
sp = 0xc0d13e68 fp = 0xc0d13e68
r4 = 0xc0a48b6c r5 = 0x00000001
r6 = 0xc08b3c38 r7 = 0x00000000
r8 = 0xc0a48b68 r9 = 0xc08b4d78
r10 = 0xc0a48a70
initclocks() at initclocks+0x2c
pc = 0xc028307c lr = 0xc027fb68 (mi_startup+0x18c)
sp = 0xc0d13e70 fp = 0xc0d13e90
mi_startup() at mi_startup+0x18c
pc = 0xc027fb68 lr = 0xc0000244 (_start+0x144)
sp = 0xc0d13e98 fp = 0x00000000
r4 = 0xc0000378 r5 = 0xc0a98000
r6 = 0x0000000e r7 = 0x00c52078
r8 = 0xc0c21000 r9 = 0x3ebfa800
r10 = 0x00000040
_start() at _start+0x144
pc = 0xc0000244 lr = 0xc0000244 (_start+0x144)
sp = 0xc0d13e98 fp = 0x00000000
KDB: enter: panic
[ thread pid 0 tid 100000 ]
Stopped at $d.3: ldrb r15, [r15, r15, ror r15]!
db>
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-bugs
mailing list