[Bug 224536] FLUSHCACHE48 AHCI Timeouts on SMR Drives

Fri Mar 9 00:37:48 UTC 2018

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224536

ronen8250 at walla.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |ronen8250 at walla.com

--- Comment #1 from ronen8250 at walla.com ---
Same problem with sparc64.

I have just upgrade my Sun Ultra2 from Free-BSD 10.1 to 11.1 and I got some
error messages and the running commands freeze.

# dmesg 
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 08:46:54 UTC 2017
    root at releng2.nyi.freebsd.org:/usr/obj/sparc64.sparc64/usr/src/sys/GENERIC
sparc64
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory  = 1073741824 (1024 MB)
avail memory = 1030152192 (982 MB)
cpu0: Sun Microsystems UltraSparc-II Processor (296.01 MHz CPU)
cpu1: Sun Microsystems UltraSparc-II Processor (296.01 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
nexus0: <Open Firmware Nexus device>
sbus0: <U2S UPA-SBus bridge> mem 0x1fe00000000-0x1fe00007fff irq
2036,2037,2038,2021,2026,2039 on nexus0
sbus0: clock 25.000 MHz
sbus0: DVMA map: 0xfc000000 to 0xffffffff 8192 entries, streaming buffer
sbus0: [GIANT-LOCKED]
sbus0: [GIANT-LOCKED]
initializing counter-timer
Timecounter "sbus0" frequency 1000000 Hz quality 100
auxio0: <Sun Auxiliary I/O> mem 0x1900000 on sbus0
pcm0: <Sun Audiocs> mem 0xc000000-0xc0001ff irq 2020 on sbus0
pcm0: <CS4231A Codec Id. 10>
sbus0: <flashprom> mem 0-0x7ffff,0x1380000-0x13fffff type unknown (no driver
attached)
sbus0: <SUNW,fdtwo> mem 0x1400000-0x1400007 irq 2025 type block (no driver
attached)
eeprom0: <EEPROM/clock> mem 0x1200000-0x1201fff on sbus0
eeprom0: model mk48t59
scc0: <Zilog Z8530 dual channel SCC> mem 0x1100000-0x1100003 irq 2024 on sbus0
uart0: <z8530, channel A> on scc0
uart0: stray vector interrupt 2033
console (38400,n,8,1)
uart1: <z8530, channel B> on scc0
scc1: <Zilog Z8530 dual channel SCC> mem 0x1000000-0x1000003 irq 2024 on sbus0
uart2: <z8530, channel A> on scc1
uart2: keyboard (1200,n,8,1)
uart2: keyboard not present
uart3: <z8530, channel B> on scc1
sbus0: <sc> mem 0x1300000-0x1300007 type unknown (no driver attached)
sbus0: <SUNW,pll> mem 0x1304000-0x1304002 type unknown (no driver attached)
esp0: <Sun FAS366 Fast-Wide SCSI> mem 0x8800000-0x880000f,0x8810000-0x881003f
irq 2016 on sbus0
esp0: FAS366/HME, 40 MHz, SCSI ID 7
hme0: <Sun HME 10/100 Ethernet> mem
0x8c00000-0x8c00107,0x8c02000-0x8c03fff,0x8c04000-0x8c05fff,0x8c06000-0x8c07fff,0x8c07000-0x8c0701f
irq 2017 on sbus0
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> PHY 1 on miibus0
nsphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: xx:xx:xx:xx:xx:xx
sbus0: <SUNW,bpp> mem 0xc800000-0xc80001b irq 2018 type unknown (no driver
attached)
sbus0: <nm212> mem 0-0x1ffff,0x20000-0x9ffff,0xa0000-0xdffff,0xe0000-0xe00ff
irq 1996 type network (no driver attached)
creator0: <Creator3D> mem
0x1fc00000000-0x1fc000003ff,0x1fc00400000-0x1fc005fffff,0x1fc00600000-0x1fc007fffff,0x1fc01000000-0x1fc013fffff,0x1fc01400000-0x1fc017fffff,0x1fc01800000-0x1fc01bfffff,0x1fc01c00000-0x1fc01ffffff,0x1fc02000000-0x1fc02ffffff,0x1fc03000000-0x1fc03ffffff,0x1fc04000000-0x1fc043fffff,0x1fc04400000-0x1fc047fffff,0x1fc04800000-0x1fc04bfffff,0x1fc04c00000-0x1fc04ffffff,0x1fc05000000-0x1fc05ffffff,0x1fc06000000-0x1fc07ffffff,0x1fc09000000-0x1fc097fffff,0x1fc09800000-0x1fc09ffffff,0x1fc0a000000-0x1fc0affffff,0x1fc0b000000-0x1fc0b7fffff,0x1fc0b800000-0x1fc0bffffff,0x1fc0c000000-0x1fc0c3fffff,0x1fc0c800000-0x1fc0cffffff,0x1fc0d000000-0x1fc0d7fffff,0x1fc0d800000-0x1fc0dffffff
irq 1925 on nexus0
creator0: resolution 1152x900
cryptosoft0: <software crypto> on nexus0
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=0x100>
Timecounter "tick" frequency 296008859 Hz quality 10
Event timer "tick" frequency 296008859 Hz quality 1000
Timecounters tick every 1.000 msec
usb_needs_explore_all: no devclass
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0a [rw]...
da0 at esp0 bus 0 scbus0 target 0 lun 0
da0: <IBM DNES30917SUN9.0G SAD0> Fixed Direct Access SCSI-3 device
da0: Serial Number 27L734          
da0: 20.000MB/s transfers (10.000MHz, offset 5, 16bit)
da0: Command Queueing enabled
da0: 8637MB (17689267 512 byte sectors)
cd0 at esp0 bus 0 scbus0 target 6 lun 0
cd0: <TOSHIBA DVD-ROM SD-M1401 1009> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Logical unit is in process
of becoming ready
hme0: link state changed to DOWN
hme0: link state changed to UP
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1681ce0 (flags 0x1, dleft 1000, stat
0)], <state 2, nexus 0xc1680888, phase(l 97, c 100, p 3), resid 1000, msg(q 0,o
40) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1683138 (flags 0x1, dleft 1000, stat
0)], <state 1, nexus 0, phase(l 97, c 100, p 7), resid 1000, msg(q 0,o 40) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1687770 (flags 0x1, dleft 1000, stat
0)], <state 1, nexus 0, phase(l 97, c 100, p 7), resid 1000, msg(q 0,o 40) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1687ab8 (flags 0x1, dleft 1000, stat
0)], <state 1, nexus 0, phase(l 97, c 100, p 7), resid 1000, msg(q 0,o 40) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc16842f0 (flags 0x1, dleft 1000, stat
0)], <state 4, nexus 0, phase(l 97, c 7, p 7), resid 1000, msg(q 0,o 0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1688928 (flags 0x1, dleft 8000, stat
0)], <state 4, nexus 0, phase(l 97, c 7, p 7), resid 1000, msg(q 0,o 0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1682178 (flags 0x1, dleft 8000, stat
0)], <state 4, nexus 0, phase(l 97, c 7, p 7), resid 1000, msg(q 0,o 0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1680930 (flags 0x1, dleft 1000, stat
0)], <state 4, nexus 0, phase(l 97, c 7, p 7), resid 1000, msg(q 0,o 0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1682370 (flags 0x1, dleft 1000, stat
0)], <state 4, nexus 0, phase(l 97, c 7, p 7), resid 1000, msg(q 0,o 0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1686078 (flags 0x1, dleft 1000, stat
0)], <state 4, nexus 0, phase(l 97, c 7, p 7), resid 1000, msg(q 0,o 0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1687cb0 (flags 0x1, dleft 1000, stat
0)], <state 5, nexus 0xc168a4b8, phase(l 93, c 7, p 7), resid 1000, msg(q 0,o
0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc16887d8 (flags 0x101, dleft 1000,
stat 0)], <state 5, nexus 0xc168a4b8, phase(l 97, c 3, p 3), resid 1000, msg(q
0,o 0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1685b38 (flags 0x1, dleft 1000, stat
0)], <state 1, nexus 0, phase(l 97, c 100, p 3), resid 1000, msg(q 0,o 0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc1680888 (flags 0x1, dleft 1000, stat
0)], <state 4, nexus 0, phase(l 97, c 7, p 3), resid 1000, msg(q 0,o 0) >
(da0:esp0:0:0:0): esp0: timed out [ecb 0xc16885e0 (flags 0x1, dleft 1000, stat
0)], <state 4, nexus 0, phase(l 97, c 7, p 7), resid 1000, msg(q 0,o 0) >
(da0:esp0:0:0:0): WRITE(10). CDB: 2a 00 00 9f ed a0 00 00 08 00 
(da0:esp0:0:0:0): CAM status: Command timeout
(da0:esp0:0:0:0): Retrying command

-- 
You are receiving this mail because:
You are the assignee for the bug.