[Bug 233817] Intel em I218-V doesn't re-initialise after wake from S3

bugzilla-noreply at freebsd.org bugzilla-noreply at freebsd.org
Wed Dec 5 23:49:36 UTC 2018


https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233817

            Bug ID: 233817
           Summary: Intel em I218-V doesn't re-initialise after wake from
                    S3
           Product: Base System
           Version: 12.0-STABLE
          Hardware: amd64
                OS: Any
            Status: New
          Severity: Affects Only Me
          Priority: ---
         Component: kern
          Assignee: bugs at FreeBSD.org
          Reporter: jason at tubnor.net

The em driver on my Lenovo T450 does not re-initialise after resuming from
sleep.  This is on 12.0-RC3 but it has always been an issue with the 11 series
too.

How-to replicate:

Have a functioning network on the em0 interface, usually getting an address via
dhcp.

Put laptop to sleep for 30s

Remove patch lead from laptop

Wake laptop from sleep, re-insert patch lead after 10s and perform
ping/tcpdump, no traffic will pass.

Note:  Problem doesn't exist as long as the patch lead always remains attached
to the laptop and associated switch powered up.  But the replication above is a
typical daily scenario for a laptop.

Below is the pciconf -lcvb and dmesg output after wake:

# pciconf -lcvb
hostb0 at pci0:0:0:0:      class=0x060000 card=0x503417aa chip=0x16048086 rev=0x09
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Broadwell-U Host Bridge -OPI'
    class      = bridge
    subclass   = HOST-PCI
    cap 09[e0] = vendor (length 12) Intel cap 0 version 1
vgapci0 at pci0:0:2:0:     class=0x030000 card=0x503417aa chip=0x16168086 rev=0x09
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'HD Graphics 5500'
    class      = display
    subclass   = VGA
    bar   [10] = type Memory, range 64, base 0xf0000000, size 16777216, enabled
    bar   [18] = type Prefetchable Memory, range 64, base 0xe0000000, size
268435456, enabled
    bar   [20] = type I/O Port, range 32, base 0x3000, size 64, enabled
    cap 05[90] = MSI supports 1 message 
    cap 01[d0] = powerspec 2  supports D0 D3  current D0
    cap 13[a4] = PCI Advanced Features: FLR TP
hdac0 at pci0:0:3:0:       class=0x040300 card=0x503417aa chip=0x160c8086 rev=0x09
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Broadwell-U Audio Controller'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xf1230000, size 16384, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 05[60] = MSI supports 1 message enabled with 1 message
    cap 10[70] = PCI-Express 1 root endpoint max data 128(128) FLR NS
xhci0 at pci0:0:20:0:      class=0x0c0330 card=0x503417aa chip=0x9cb18086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP USB xHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 64, base 0xf1220000, size 65536, enabled
    cap 01[70] = powerspec 2  supports D0 D3  current D0
    cap 05[80] = MSI supports 8 messages, 64 bit enabled with 1 message
none0 at pci0:0:22:0:      class=0x078000 card=0x503417aa chip=0x9cba8086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP MEI Controller'
    class      = simple comms
    bar   [10] = type Memory, range 64, base 0xf1239000, size 32, enabled
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 05[8c] = MSI supports 1 message, 64 bit 
em0 at pci0:0:25:0:        class=0x020000 card=0x222617aa chip=0x15a38086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Ethernet Connection (3) I218-V'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 32, base 0xf1200000, size 131072, enabled
    bar   [14] = type Memory, range 32, base 0xf123e000, size 4096, enabled
    bar   [18] = type I/O Port, range 32, base 0x3080, size 32, enabled
    cap 01[c8] = powerspec 2  supports D0 D3  current D0
    cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 13[e0] = PCI Advanced Features: FLR TP
hdac1 at pci0:0:27:0:      class=0x040300 card=0x503417aa chip=0x9ca08086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xf1234000, size 16384, enabled
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
pcib1 at pci0:0:28:0:      class=0x060400 card=0x503417aa chip=0x9c9a8086 rev=0xe3
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 2 root port max data 128(128)
                 link x1(x1) speed 2.5(5.0) ASPM L0s/L1(L0s/L1)
                 slot 5 power limit 100 mW
    cap 05[80] = MSI supports 1 message 
    cap 0d[90] = PCI Bridge card=0x503417aa
    cap 01[a0] = powerspec 3  supports D0 D3  current D0
    ecap 0000[100] = unknown 0
    ecap 001e[200] = unknown 1
pcib2 at pci0:0:28:1:      class=0x060400 card=0x503417aa chip=0x9c948086 rev=0xe3
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 2 root port max data 128(128)
                 link x1(x1) speed 2.5(5.0) ASPM L1(L0s/L1)
                 slot 2 power limit 100 mW
    cap 05[80] = MSI supports 1 message 
    cap 0d[90] = PCI Bridge card=0x503417aa
    cap 01[a0] = powerspec 3  supports D0 D3  current D0
    ecap 0000[100] = unknown 0
    ecap 001e[200] = unknown 1
ehci0 at pci0:0:29:0:      class=0x0c0320 card=0x503417aa chip=0x9ca68086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP USB EHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xf123d000, size 1024, enabled
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 13[98] = PCI Advanced Features: FLR TP
isab0 at pci0:0:31:0:      class=0x060100 card=0x503417aa chip=0x9cc38086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP LPC Controller'
    class      = bridge
    subclass   = PCI-ISA
    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
                 features: AMT, 4 PCI-e x1 slots
ahci0 at pci0:0:31:2:      class=0x010601 card=0x503417aa chip=0x9c838086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP SATA Controller [AHCI Mode]'
    class      = mass storage
    subclass   = SATA
    bar   [10] = type I/O Port, range 32, base 0x30a8, size 8, enabled
    bar   [14] = type I/O Port, range 32, base 0x30b4, size 4, enabled
    bar   [18] = type I/O Port, range 32, base 0x30a0, size 8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x30b0, size 4, enabled
    bar   [20] = type I/O Port, range 32, base 0x3060, size 32, enabled
    bar   [24] = type Memory, range 32, base 0xf123c000, size 2048, enabled
    cap 05[80] = MSI supports 1 message enabled with 1 message
    cap 01[70] = powerspec 3  supports D0 D3  current D0
    cap 12[a8] = SATA Index-Data Pair
none1 at pci0:0:31:3:      class=0x0c0500 card=0x503417aa chip=0x9ca28086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP SMBus Controller'
    class      = serial bus
    subclass   = SMBus
    bar   [10] = type Memory, range 64, base 0xf1238000, size 256, enabled
    bar   [20] = type I/O Port, range 32, base 0xefa0, size 32, enabled
none2 at pci0:0:31:6:      class=0x118000 card=0x503417aa chip=0x9ca48086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wildcat Point-LP Thermal Management Controller'
    class      = dasp
    bar   [10] = type Memory, range 64, base 0xf123b000, size 4096, enabled
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 05[80] = MSI supports 1 message 
none3 at pci0:2:0:0:       class=0xff0000 card=0x503417aa chip=0x522710ec rev=0x01
hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTS5227 PCI Express Card Reader'
    bar   [10] = type Memory, range 32, base 0xf1100000, size 4096, enabled
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit 
    cap 10[70] = PCI-Express 2 endpoint max data 128(128) RO
                 link x1(x1) speed 2.5(2.5) ASPM L0s/L1(L0s/L1)
    ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
    ecap 0003[140] = Serial 1 00000001004ce000
    ecap 0018[150] = LTR 1
    ecap 001e[158] = unknown 1
iwm0 at pci0:3:0:0:        class=0x028000 card=0x52108086 chip=0x095b8086 rev=0x99
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wireless 7265'
    class      = network
    bar   [10] = type Memory, range 64, base 0xf1000000, size 8192, enabled
    cap 01[c8] = powerspec 3  supports D0 D3  current D0
    cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 10[40] = PCI-Express 2 endpoint max data 128(128) FLR RO NS
                 link x1(x1) speed 2.5(2.5) ASPM L1(L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 0003[140] = Serial 1 1002b5ffffbadb9b
    ecap 0018[14c] = LTR 1
    ecap 001e[154] = unknown 1


# dmesg

---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RC3 r341271 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM
6.0.1)
VT(efifb): resolution 1600x900
CPU: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (2194.97-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306d4  Family=0x6  Model=0x3d  Stepping=4
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended
Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8152264704 (7774 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-JB   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39 on motherboard
Launching APs: 1 2 3
Timecounter "TSC-low" frequency 1097482600 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9750, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-JB> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x25, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem
0xf0000000-0xf0ffffff,0xe0000000-0xefffffff at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
vgapci0: Boot video device
hdac0: <Intel Broadwell HDA Controller> mem 0xf1230000-0xf1233fff at device 3.0
on pci0
xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem
0xf1220000-0xf122ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection> port 0x3080-0x309f mem
0xf1200000-0xf121ffff,0xf123e000-0xf123efff at device 25.0 on pci0
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 1
em0: Unable to map MSIX table 
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
em0: Ethernet address: 50:7b:9d:c4:ec:a8
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Broadwell HDA Controller> mem 0xf1234000-0xf1237fff at device
27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <unknown> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf123d000-0xf123d3ff at device
29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI SATA controller> port
0x30a8-0x30af,0x30b4-0x30b7,0x30a0-0x30a7,0x30b0-0x30b3,0x3060-0x307f mem
0xf123c000-0xf123c7ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZ7LF192HCGS-000L1 FXT03L1Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S28ZNXAG812321
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 183151MB (375093936 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:tb1/ROOT/default []...
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Root mount waiting for: usbus1 usbus0
uhub0: 15 ports with 15 removable, self powered
Root mount waiting for: usbus1 usbus0
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <Generic EMV Smartcard Reader> at usbus0
Root mount waiting for: usbus1 usbus0
ugen0.3: <SunplusIT Inc Integrated Camera> at usbus0
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on
usbus1
uhub2: 8 ports with 8 removable, self powered
anon_inodefs_init: 
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Memory usable by graphics device = 4096M
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Connector eDP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.eDP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-2
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-2
[drm]   - kern.vt.fb.default_mode
[drm] Initialized i915 1.6.0 20170123 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=900 width=1600 depth=32
cmsize=16 size=5763072
pbase=0xe0011000 vbase=0xfffff800e0011000
name=drmn0 flags=0x0 stride=6400 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
lo0: link state changed to UP
em0: link state changed to UP
iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xf1000000-0xf1001fff at device
0.0 on pci2
iwm0: hw rev 0x210, fw ver 22.361476.0, address 10:02:b5:ba:db:9b
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
<-- snip 200 lines -->
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
uhub1: at usbus1, port 1, addr 1 (disconnected)
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 (disconnected)
uhub2: at uhub1, port 1, addr 2 (disconnected)
uhub2: detached
uhub0: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected)
ugen0.3: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected)
hdac0: Command timeout on address 0
vgapci0: child drmn0 requested pci_set_powerstate
pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER
acpi0: cleared fixed power button status
vgapci0: child drmn0 requested pci_set_powerstate
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
hdac0: Device stuck in reset
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
hdac0: Command timeout on address 0
xhci0: Port routing mask set to 0xffffffff
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
em0: link state changed to DOWN
uhub0: 15 ports with 15 removable, self powered
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.2: <Generic EMV Smartcard Reader> at usbus0
ugen0.3: <SunplusIT Inc Integrated Camera> at usbus0
uhub1: 3 ports with 3 removable, self powered
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on
usbus1
uhub2: 8 ports with 8 removable, self powered
em0: link state changed to UP

# ping 9.9.9.9
PING 9.9.9.9 (9.9.9.9): 56 data bytes
^C
--- 9.9.9.9 ping statistics ---
13 packets transmitted, 0 packets received, 100.0% packet loss

-- 
You are receiving this mail because:
You are the assignee for the bug.


More information about the freebsd-bugs mailing list