[Bug 210742] intel Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller and 3440x1440 resolution

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=210742

            Bug ID: 210742
           Summary: intel Xeon E3-1200 v2/3rd Gen Core processor Graphics
                    Controller and 3440x1440 resolution
           Product: Base System
           Version: 10.3-RELEASE
          Hardware: Any
                OS: Any
            Status: New
          Severity: Affects Only Me
          Priority: ---
         Component: kern
          Assignee: freebsd-bugs at FreeBSD.org
          Reporter: delleceste at gmail.com

Hello.
I've just received a new 34" Dell monitor, but I am unable to start X on
freebsd.
When I bring resolution above 2560x1080, for example 2560x1440 or 3440x1440
(which is the resolution I use in Linux), the screen goes off and the only
thing I can do is restart the computer with Ctrl Alt Canc. I can't switch back
to text console.

Is this resolution too high for the current i915kms driver?
Is something I can do?

dmesg says:

iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0x0
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xe0000000-0xf0000000
info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.VGA-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-2
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-3: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-3
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-2
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-3: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-3
info: [drm]   - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
error: [drm:pid871:gen6_sanitize_pm] *ERROR* Power management discrepancy:
GEN6_RP_INTERRUPT_LIMITS expected 17000000, was 12000000
pid 931 (zeitgeist-datahub), uid 1001: exited on signal 6 (core dumped)

Xorg.0.log does not report any (EE) error message, apart from fbdev module not
found.

Ok with resolutions < 2560x1440.

I'm setting

device         vt 

and

kldload i915kms

Thanks for any help.

Giacomo, Italy.

-- 
You are receiving this mail because:
You are the assignee for the bug.