[Bug 205855] ICH7R identified as ICH9R, doesn't work in RAID mode

Fri Jan 8 09:48:45 UTC 2016

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=205855

--- Comment #9 from arcadiy at ivanovy.net ---
10.2 dmesg.boot

Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-STABLE #0 r293336: Thu Jan  7 12:45:10 EST 2016
    admin at fw1.home.ivanovy.net:/usr/obj/usr/src/sys/FIREWALL amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM)2 Duo CPU     E7200  @ 2.53GHz (2527.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x10676  Family=0x6  Model=0x17  Stepping=6

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 1073741824 (1024 MB)
avail memory = 1020993536 (973 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL   FX09   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
random device not loaded; using insecure entropy
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8
(20150515/tbfadt-644)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8
(20150515/tbfadt-644)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8
(20150515/tbfadt-644)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/8
(20150515/tbfadt-644)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using
default 32 (20150515/tbfadt-725)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using
default 16 (20150515/tbfadt-725)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default
32 (20150515/tbfadt-725)
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd0 at kbdmux0
random: <Software, Yarrow> initialized
smbios0: <System Management BIOS> at iomem 0xf0be0-0xf0bfe on motherboard
smbios0: Version: 2.5, BCD Revision: 2.5
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL FX09   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on
acpi0
device_attach: hpet0 attach returned 12
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xdf00-0xdf1f mem
0xfdae0000-0xfdafffff,0xfdac0000-0xfdadffff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: 00:15:17:85:7b:a2
em1: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xde00-0xde1f mem
0xfdaa0000-0xfdabffff,0xfda80000-0xfda9ffff irq 17 at device 0.1 on pci1
em1: Using an MSI interrupt
em1: Ethernet address: 00:15:17:85:7b:a3
vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem
0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfdc00000-0xfdcfffff irq 16 at
device 2.0 on pci0
agp0: <Intel G33 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 4194300k stolen memory
vgapci0: Boot video device
em2: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xfe00-0xfe1f mem
0xfdfc0000-0xfdfdffff,0xfdfff000-0xfdffffff irq 20 at device 25.0 on pci0
em2: Using an MSI interrupt
em2: Ethernet address: 00:21:9b:0b:a0:8c
uhci0: <Intel 82801I (ICH9) USB controller> port 0xfd00-0xfd1f irq 16 at device
26.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xfc00-0xfc1f irq 21 at device
26.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xfb00-0xfb1f irq 19 at device
26.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq
18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
uhci3: <Intel 82801I (ICH9) USB controller> port 0xfa00-0xfa1f irq 23 at device
29.0 on pci0
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xf900-0xf91f irq 19 at device
29.1 on pci0
usbus5 on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xf800-0xf81f irq 18 at device
29.2 on pci0
usbus6 on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffd000-0xfdffd3ff irq
23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port
0xf700-0xf707,0xf600-0xf603,0xf500-0xf507,0xf400-0xf403,0xf300-0xf31f mem
0xfdffc000-0xfdffc7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x500-0x51f mem
0xfdffb000-0xfdffb0ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_tz0: <Thermal Zone> on acpi0
ichwd0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcc000-0xcefff,0xcf000-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen5.1: <Intel> at usbus5
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Intel> at usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST380815AS 4.ADA> ATA-7 SATA 2.x device
ada0: Serial Number 5RW48EHG
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 76293MB (156250000 512 byte sectors)
ada0: Previously was known as ad0
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST380815AS 4.ADA> ATA-7 SATA 2.x device
ada1: Serial Number 5RW475QJ
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 76293MB (156250000 512 byte sectors)
ada1: Previously was known as ad1
pass2 at ahcich4 bus 0 scbus4 target 0 lun 0
pass2: <TSSTcorp DVD+-RW TS-H653F D200> Removable CD-ROM SCSI device
pass2: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
pass3 at ahciem0 bus 0 scbus6 target 0 lun 0
pass3: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
GEOM_RAID: Intel-29b44d78: Array Intel-29b44d78 created.
GEOM_RAID: Intel-29b44d78: Disk ada0 state changed from NONE to ACTIVE.
GEOM_RAID: Intel-29b44d78: Subdisk Volume0:0-ada0 state changed from NONE to
ACTIVE.
GEOM_RAID: Intel-29b44d78: Disk ada1 state changed from NONE to ACTIVE.
GEOM_RAID: Intel-29b44d78: Subdisk Volume0:1-ada1 state changed from NONE to
ACTIVE.
GEOM_RAID: Intel-29b44d78: Array started.
GEOM_RAID: Intel-29b44d78: Volume Volume0 state changed from STARTING to
OPTIMAL.
GEOM_RAID: Intel-29b44d78: Provider raid/r0 for volume Volume0 created.
SMP: AP CPU #1 Launched!
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA>
IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC>
IAF/3/40/0x67<INT,USR,SYS,REA,WRI>
Timecounter "TSC-low" frequency 1263524823 Hz quality 1000
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/raid/r0s1a [rw]...
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 2> on usbus5
kbd1 at ukbd0
.
 got link
em1: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny,
logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded

-- 
You are receiving this mail because:
You are the assignee for the bug.