[Bug 191348] [mps] LSI2308 with WD3000FYYZ drives disappears after hotswapping

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=191348

Graham Allan <gta at umn.edu> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |gta at umn.edu

--- Comment #38 from Graham Allan <gta at umn.edu> ---
I'm not sure if I'm still seeing this same issue here (FreeBSD 10.2-p7). I have
a server with 4 attached SC847-JBOS1 drives chassis, the HBA is 9207-8e with
20.00.04.00 firmware.

I set dev.mps.0.spinup_wait_time="5" a while back, and had to remove/replace 42
drives from one chassis. The system detected all but one drive - I can swap
drives between that and another slot, and it's that particular slot (rather
than the drive) which is persistently not detected.

I'm sure it will be detected after a reboot, but before doing that, I set
dev.mps.0.debug_level=4 and pulled/replaced the drive. I'll attach the output
(along with some earlier bits containing the hardware config etc) in case it
reveals anything - I have no idea if it's really related to this issue.

Graham

-- 
You are receiving this mail because:
You are the assignee for the bug.