[Bug 200993] camcontrol commands results in Periph destroyed on mrsas
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Tue Jun 23 21:58:47 UTC 2015
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200993
--- Comment #5 from Alex P <alex.placentra at artemisracing.com> ---
Also forgot to mention that camcontrol rescan brings back any detached drives
(In reply to Phil Kulin from comment #4)
# camcontrol identify /dev/da0
pass1: <TOSHIBA DT01ACA300 MX6OABB0> ATA-8 SATA 3.x device
camcontrol: get_cpi: error sending Path Inquiry CCB: Device not configured
protocol ATA/ATAPI-8 SATA 3.x
device model TOSHIBA DT01ACA300
firmware revision MX6OABB0
serial number Z46Z2NUGS
WWN 5000039ff4e9dc2b
cylinders 16383
heads 16
sectors/track 63
sector size logical 512, physical 4096, offset 0
LBA supported 268435455 sectors
LBA48 supported 5860533168 sectors
PIO supported PIO4
DMA supported WDMA2 UDMA6
media RPM 7200
Feature Support Enabled Value Vendor
read ahead yes yes
write cache yes yes
flush cache yes yes
overlap no
Tagged Command Queuing (TCQ) no no
Native Command Queuing (NCQ) yes 32 tags
NCQ Queue Management no
NCQ Streaming no
Receive & Send FPDMA Queued no
SMART yes yes
microcode download yes yes
security yes no
power management yes yes
advanced power management yes no 0/0x00
automatic acoustic management no no
media status notification no no
power-up in Standby yes no
write-read-verify no no
unload no no
general purpose logging yes yes
free-fall no no
Data Set Management (DSM/TRIM) no
Host Protected Area (HPA) yes no 5860533168/1
HPA - Security no
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-bugs
mailing list