[Bug 200993] camcontrol commands results in Periph destroyed on mrsas

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200993

Alex P <alex.placentra at artemisracing.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |alex.placentra at artemisracin
                   |                            |g.com

--- Comment #3 from Alex P <alex.placentra at artemisracing.com> ---
Hello,

I have the same issue happening on a Supermicro X9SAE-V system with LSI 9341-8i
card.

Issue is present with Phil's mrsas version (from 10.1-RELEASE iso media) and
with latest mrsas SVN version r284739.


Thanks
Alex


smartctl -a /dev/da0
# causes da0 to disapper with log:
da0 at mrsas0 bus 1 scbus1 target 8 lun 0
da0: <ATA TOSHIBA DT01ACA3 ABB0> s/n            Z4602W6GS detached
(da0:mrsas0:1:8:0): Periph destroyed
# followed by:
smartctl -a /dev/da2
# causes:
da2 at mrsas0 bus 1 scbus1 target 10 lun 0
da2: <ATA TOSHIBA DT01ACA3 ABB0> s/n            Z46Z2NUGS detached
(da2:mrsas0:1:10:0): Periph destroyed


# uname -a
FreeBSD host 10.1-RELEASE FreeBSD 10.1-RELEASE #1: Tue Jun 23 22:05:59 PDT 2015


# sysctl dev.mrsas
dev.mrsas.%parent: 
dev.mrsas.0.%desc: AVAGO Fury SAS Controller
dev.mrsas.0.%driver: mrsas
dev.mrsas.0.%location: slot=0 function=0
dev.mrsas.0.%pnpinfo: vendor=0x1000 device=0x005f subvendor=0x1000
subdevice=0x9341 class=0x010400
dev.mrsas.0.%parent: pci2
dev.mrsas.0.disable_ocr: 0
dev.mrsas.0.driver_version: 06.707.04.03-fbsd
dev.mrsas.0.reset_count: 0
dev.mrsas.0.fw_outstanding: 0
dev.mrsas.0.io_cmds_highwater: 8
dev.mrsas.0.mrsas_debug: 4
dev.mrsas.0.mrsas_io_timeout: 180000
dev.mrsas.0.mrsas_fw_fault_check_delay: 1
dev.mrsas.0.reset_in_progress: 0

-- 
You are receiving this mail because:
You are the assignee for the bug.