[Bug 201194] Kernel: ahcich: Timeout in slot
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Thu Jul 23 15:45:41 UTC 2015
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=201194
patpro <freebsdbug at patpro.net> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |freebsdbug at patpro.net
--- Comment #2 from patpro <freebsdbug at patpro.net> ---
I've got a similar problem on FreeBSD 10.1-RELEASE, but using Intel chipset:
ahci0: <Intel Cougar Point AHCI SATA controller> port
0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem
0xdfa22000-0xdfa227ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
Problem first appeared 28 minutes after the binary upgrade from 9.3-RELEASE
(the server ran flawlessly for 4 years before that).
At boottime :
ahcich5: Timeout on slot 0 port 0
(and so on)
During normal operation :
ahcich1: Timeout on slot 25 port 0
ahcich1: is 00000000 cs 04000000 ss 06000000 rs 06000000 tfd 40 serr 00000000
cmd 0004d917
(ada1:ahcich1:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 28 ee 3c 40 2e 00 00 01 00
00
(ada1:ahcich1:0:0:0): CAM status: Command timeout
(ada1:ahcich1:0:0:0): Retrying command
ahcich1: stopping AHCI engine failed
ahcich0: Timeout on slot 23 port 0
ahcich0: is 00000000 cs 01000000 ss 01800000 rs 01800000 tfd 40 serr 00000000
cmd 0004d717
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 28 ee 3c 40 2e 00 00 01 00
00
(ada0:ahcich0:0:0:0): CAM status: Command timeout
(ada0:ahcich0:0:0:0): Retrying command
ahcich0: stopping AHCI engine failed
ahcich1: AHCI reset: device not ready after 31000ms (tfd = 00000080)
ahcich1: executing CLO failed
ahcich0: AHCI reset: device not ready after 31000ms (tfd = 00000080)
ahcich0: executing CLO failed
ahcich1: Timeout on slot 26 port 0
and the box freezes.
Happened twice in one month.
I'm going to give hint.ahci.0.msi=0 a try later...
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-bugs
mailing list