[Bug 195516] New: FreeBSD/i386 10.0-RELEASE does not boot on Panasonic CF-R3

bugzilla-noreply at freebsd.org bugzilla-noreply at freebsd.org
Sun Nov 30 01:22:41 UTC 2014


https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=195516

            Bug ID: 195516
           Summary: FreeBSD/i386 10.0-RELEASE does not boot on Panasonic
                    CF-R3
           Product: Base System
           Version: 10.1-RELEASE
          Hardware: i386
                OS: Any
            Status: New
          Severity: Affects Only Me
          Priority: ---
         Component: kern
          Assignee: freebsd-bugs at FreeBSD.org
          Reporter: ryo_on at yk.rim.or.jp

Created attachment 150015
  --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=150015&action=edit
Screen shot of last messages

Panasonic CF-R3 is i386 machine.
Using FreeBSD-10.1-RELEASE-i386-memstick.img.xz, FreeBSD does not boot.
Last message is the following.

agp1: <Intel 82855GME (855GME GMCH) SCGA controller> on vgapci0
panic: make_dev_credv: bad si_name (error 17, si_name=agpgart)
cpuid = 0
KDB: (snap)

NetBSD/i386 6.1.5 boots without problem.
The attached JPEG file is screen shot of last messages.

dmesg output from NetBSD/i386 6.1.5 is the following.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1.5 (GENERIC)
total memory = 246 MB
avail memory = 229 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Matsushita Electric Industrial Co.,Ltd. CF-R3EW1AXR (002)
mainbus0 (root)
cpu0 at mainbus0: Intel(R) Pentium(R) M processor 1.10GHz, id 0x6d6
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 9
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 9
LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 9
LNKG: ACPI: Found matching pin for 2.5.INTA at func 0: 255
LNKE: ACPI: Found matching pin for 2.5.INTB at func 1: 5
LNKD: ACPI: Found matching pin for 2.1.INTA at func 0: 3
LNKF: ACPI: Found matching pin for 2.4.INTA at func 0: 7
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
RBAR (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GRFX): ACPI Display Adapter
acpiout0 at acpivga0 (CRT1, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD1, 0x0400): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0, bios detect
MBRD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (K106, PNP0320) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU3, SYN0002) (aux port): irq 12
acpibut0 at acpi0 (PWRB, PNP0C0C-0): ACPI Power Button
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpibat0 at acpi0 (BATA, PNP0C0A-0): ACPI Battery
acpibat0: Panasonic LION rechargeable battery
acpibat0: granularity: low->warn 0.010 Wh, warn->full 0.010 Wh
HKEY (MAT0019) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D-0): ACPI Lid Switch
acpitz0 at acpi0 (TZC): cpu0
acpitz0: levels: critical 102.8 C, passive 85.8 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.9
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3580 (rev. 0x02)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture at 0xe8000000, size 0x8000000
vendor 0x8086 product 0x3584 (miscellaneous system, revision 0x02) at pci0 dev
0 function 1 not configured
vendor 0x8086 product 0x3585 (miscellaneous system, revision 0x02) at pci0 dev
0 function 3 not configured
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3581 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3582 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i852GM/i855GM GMCH
i915drm0: AGP at 0xe8000000 128MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x3582 (miscellaneous display, revision 0x02) at pci0 dev
2 function 1 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x03)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x03)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controller, 2 ports each: uhci0
usb1 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x83)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
rtk0 at pci2 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 3
rtk0: Ethernet address 00:0b:97:28:60:66
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
iwi0 at pci2 dev 4 function 0: vendor 0x8086 product 0x4223 (rev. 0x05)
iwi0: interrupting at irq 7
iwi0: 802.11 address 00:0e:35:7c:7c:6c
iwi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
cbb0 at pci2 dev 5 function 0: vendor 0x1180 product 0x0475 (rev. 0x88)
vendor 0x1180 product 0x0575 (miscellaneous system) at pci2 dev 5 function 1
not configured
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
LNKG: Picked IRQ 9 with weight 3
cbb0: interrupting at irq 9
cardslot0 at cbb0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x24cc (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller (ICH4-M)
(rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24c3 (rev. 0x03)
ichsmb0: interrupting at irq 9
iic0 at ichsmb0: I2C bus
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC,
SigmaTel 3D
auich0: ac97: ext id 0x601<AC97_22,AMAP,VRA>
vendor 0x8086 product 0x24c6 (modem communications, revision 0x03) at pci0 dev
31 function 6 not configured
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   1 us, pow  1000 mW
acpicpu0: C2: I/O, lat   1 us, pow   500 mW
acpicpu0: C3: I/O, lat 185 us, pow   100 mW
acpicpu0: P0: FFH, lat  10 us, pow  5000 mW, 1100 MHz
acpicpu0: P1: FFH, lat  10 us, pow  4600 mW, 1000 MHz
acpicpu0: P2: FFH, lat  10 us, pow  4200 mW,  900 MHz
acpicpu0: P3: FFH, lat  10 us, pow  3800 mW,  800 MHz
acpicpu0: P4: FFH, lat  10 us, pow  3000 mW,  600 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 47996 Hz, will use 48000 Hz
audio0 at auich0: full duplex, playback, capture, mmap, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
acpiacad0: AC adapter online.
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: SanDisk Extreme, rev 2.10/0.10, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Extreme, 0001> disk fixed
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Is in Process Of Becoming Ready

sd0: drive offline
sd0: fabricating a geometry
Kernelized RAIDframe activated
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
WARNING: clock gained 61 days
acpibat0: normal capacity on 'charge state'

-- 
You are receiving this mail because:
You are the assignee for the bug.


More information about the freebsd-bugs mailing list