misc/179033: DC ethernet driver seems to have issues with some multiport card and mother board combinations
Clif Cox
clif at eugeneweb.com
Tue May 28 00:50:00 UTC 2013
>Number: 179033
>Category: misc
>Synopsis: DC ethernet driver seems to have issues with some multiport card and mother board combinations
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue May 28 00:50:00 UTC 2013
>Closed-Date:
>Last-Modified:
>Originator: Clif Cox
>Release: 9.1-RELEASE
>Organization:
>Environment:
FreeBSD 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243826 Tue Dec 4th ...
>Description:
Greetings,
On some mother boards, with multiport 21143 based NIC cards, there seem to be driver problems. Symptoms include incorrect mac addresses, and not auto sensing link speed / carrier, which makes the affected ports unusable. For me this happens with an Intel D510MO Atom board and my Dlink DFE-570TX, or PB0554E HEWLETT-PACKARD 4 PORT 10/100 cards. Only two out of the four ports work. I reported it recently in the pfSense forum here:
http://forum.pfsense.org/index.php/topic,62722.0.html
Though you will see this problem has been around for many years:
http://forum.pfsense.org/index.php/topic,7916.msg44464.html#msg44464
http://forum.pfsense.org/index.php/topic,21526.msg111131.html#msg111131
http://forum.pfsense.org/index.php/topic,455.0.html
http://forum.pfsense.org/index.php/topic,4595.0.html
http://forum.pfsense.org/index.php/topic,455.msg2795.html#msg2795
It may be related to the 21143s history outlined here: http://www.holland-consulting.net/tech/ocep/21143.html
I tend to agree with a quote by Henning in one of his messages on the subject, "This chip and the cards based on it are too great not to be used due to a silly driver bug." If you need a good card for a good price, the challenges are worth the trouble. Further, the 21143 is used in many (most?) Quad-port NICs (four complete 10/100 Ethernet ports on one card), and this is a good reason to look at these chips.
The bottom line is running Linux and using the tulip driver these cards have no problems and a consistent throughput on all ports slightly over 94 Mb/s.
I have included some test results in the attached file.
Thanks,
Clif
>How-To-Repeat:
There are probably many combinations of mother boards and 21143 cards that have this problem as evidenced by the small selection of posts from the pfsense forum, but one combination that works for me is an Atom D510MO board and a Dlink DFE-570TX card.
>Fix:
Not sure but I'm thinking that there are some checks and work arounds in the Linux Tulip driver that you could incorporate into the dc driver.
Patch attached with submission follows:
***************************************************************************
Atom D510MO Board
********************************* IFCONFIG *********************************
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
ether 00:27:0e:07:48:a0
media: Ethernet autoselect (10baseT/UTP <half-duplex>)
status: no carrier
dc0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether ff:ff:ff:ff:ff:ff
media: Ethernet autoselect
status: no carrier
dc1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether ff:ff:ff:ff:ff:00
media: Ethernet autoselect
status: no carrier
dc2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:46
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::1:1%dc2 prefixlen 64 scopeid 0x4
nd6 options=1<PERFORMNUD>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
dc3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:47
inet6 fe80::230:6eff:fe2d:7f47%dc3 prefixlen 64 scopeid 0x5
inet 192.168.0.186 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=1<PERFORMNUD>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
enc0: flags=0<> metric 0 mtu 1536
pflog0: flags=100<PROMISC> metric 0 mtu 33192
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
pfsync0: flags=0<> metric 0 mtu 1460
syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
********************************* DMESG *********************************
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p8 #0: Sat May 25 08:07:24 EDT 2013
root at snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1686.70-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Family = 6 Model = 1c Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 3383627776 (3226 MB)
ACPI APIC Table: <INTEL MOPNV10N>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP/HT): APIC ID: 3
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07baca0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07bad40, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07bade0, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <INTEL MOPNV10N> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x30c0-0x30c7 mem 0xe0300000-0xe037ffff,0xd0000000-0xdfffffff,0xe0200000-0xe02fffff irq 16 at device 2.0 on pci0
agp0: <Intel Pineview SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 8188k stolen memory
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xe0004000-0xe0004fff,0xe0000000-0xe0003fff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3080-0x309f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3060-0x307f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3020-0x303f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0380400-0xe03807ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
dc0: <Intel 21143 10/100BaseTX> port 0x1180-0x11ff mem 0xe0100c00-0xe0100fff irq 21 at device 4.0 on pci6
miibus1: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> PHY 31 on miibus1
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: [ITHREAD]
dc1: <Intel 21143 10/100BaseTX> port 0x1100-0x117f mem 0xe0100800-0xe0100bff irq 22 at device 5.0 on pci6
dc1: Using station address of dc0 as base
miibus2: <MII bus> on dc1
dcphy1: <Intel 21143 NWAY media interface> PHY 31 on miibus2
dcphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: [ITHREAD]
dc2: <Intel 21143 10/100BaseTX> port 0x1080-0x10ff mem 0xe0100400-0xe01007ff irq 23 at device 6.0 on pci6
miibus3: <MII bus> on dc2
lxtphy0: <LXT970 10/100 media interface> PHY 0 on miibus3
lxtphy0: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: [ITHREAD]
dc3: <Intel 21143 10/100BaseTX> port 0x1000-0x107f mem 0xe0100000-0xe01003ff irq 20 at device 7.0 on pci6
miibus4: <MII bus> on dc3
lxtphy1: <LXT970 10/100 media interface> PHY 0 on miibus4
lxtphy1: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x30b8-0x30bf,0x30cc-0x30cf,0x30b0-0x30b7,0x30c8-0x30cb,0x30a0-0x30af mem 0xe0380000-0xe03803ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
ata3: <ATA channel> at channel 1 on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
p4tcc2: <CPU Frequency Thermal Control> on cpu2
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad4: 3823MB <LEXAR ATA FLASH CARD 20101110> at ata2-master UDMA66 SATA 3Gb/s
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
ugen1.1: <Intel> at usbus1ugen0.1: <Intel> at usbus0ugen2.1: <Intel> at usbus2
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
Consider tuning vm.kmem_size and vm.kmem_size_max
in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
WARNING: /cf was not properly dismounted
dc3: link state changed to DOWN
dc2: link state changed to DOWN
pflog0: promiscuous mode enabled
dc3: link state changed to UP
re0: link state changed to DOWN
dc0: link state changed to DOWN
dc1: link state changed to DOWN
dc2: link state changed to UP
in_scrubprefix: err=51, prefix delete failed
pfr_unroute_kentry: delete failed.
[2.1-RC0][root at pfSense.localdomain]/root(5):
********************************* DEVINFO *********************************
nexus0
cryptosoft0
apic0
I/O memory addresses:
0xfec00000-0xfec0001f
0xfee00000-0xfee003ff
npx0
ram0
I/O memory addresses:
0x0-0x8efff
0x90000-0x9ebff
0x100000-0xcee97fff
0xceebf000-0xcef3afff
0xcefbf000-0xceff0fff
0xcefff000-0xceffffff
acpi0
Interrupt request lines:
9
I/O ports:
0x10-0x1f
0x72-0x73
0x80
0x84-0x86
0x88
0x8c-0x8e
0x90-0x9f
0x295-0x296
0x400-0x47f
0x500-0x53f
0x680-0x6ff
I/O memory addresses:
0xc0000-0xdffff
0xe0000-0xfffff
0xf8000000-0xfbffffff
0xfed14000-0xfed17fff
0xfed18000-0xfed18fff
0xfed19000-0xfed19fff
0xfed1c000-0xfed1ffff
0xfff00000-0xffffffff
cpu0
p4tcc0
cpufreq0
cpu1
p4tcc1
cpufreq1
cpu2
p4tcc2
cpufreq2
cpu3
p4tcc3
cpufreq3
acpi_button0
pcib0
pci0
I/O ports:
0x3000-0x301f
0x30c0-0x30c7
hostb0
vgapci0
I/O memory addresses:
0xd0000000-0xdfffffff
0xe0200000-0xe02fffff
0xe0300000-0xe037ffff
agp0
pcib1
pci1
I/O ports:
0x2000-0x20ff
re0
Interrupt request lines:
256
I/O memory addresses:
0xe0000000-0xe0003fff
0xe0004000-0xe0004fff
miibus0
rgephy0
pcib2
pci2
pcib3
pci3
pcib4
pci4
uhci0
Interrupt request lines:
23
I/O ports:
0x3080-0x309f
usbus0
uhub2
uhci1
Interrupt request lines:
19
I/O ports:
0x3060-0x307f
usbus1
uhub0
uhci2
Interrupt request lines:
18
I/O ports:
0x3040-0x305f
usbus2
uhub1
uhci3
Interrupt request lines:
16
I/O ports:
0x3020-0x303f
usbus3
uhub3
ehci0
Interrupt request lines:
23
I/O memory addresses:
0xe0380400-0xe03807ff
usbus4
uhub4
pcib5
pci5
pcib6
pci6
I/O memory addresses:
0xe0100000-0xe01003ff
0xe0100400-0xe01007ff
0xe0100800-0xe0100bff
0xe0100c00-0xe0100fff
dc0
Interrupt request lines:
21
I/O ports:
0x1180-0x11ff
miibus1
dcphy0
dc1
Interrupt request lines:
22
I/O ports:
0x1100-0x117f
miibus2
dcphy1
dc2
Interrupt request lines:
23
I/O ports:
0x1080-0x10ff
miibus3
lxtphy0
dc3
Interrupt request lines:
20
I/O ports:
0x1000-0x107f
miibus4
lxtphy1
isab0
isa0
pmtimer0
sc0
vga0
I/O ports:
0x3c0-0x3df
I/O memory addresses:
0xa0000-0xbffff
ata0
Interrupt request lines:
14
I/O ports:
0x1f0-0x1f7
0x3f6
ata1
Interrupt request lines:
15
I/O ports:
0x170-0x177
0x376
atapci0
Interrupt request lines:
19
I/O ports:
0x30a0-0x30af
0x30b0-0x30b7
0x30b8-0x30bf
0x30c8-0x30cb
0x30cc-0x30cf
I/O memory addresses:
0xe0380000-0xe03803ff
ata2
ad4
subdisk4
ata3
acpi_sysresource0
pci_link0
pci_link1
pci_link2
pci_link3
pci_link4
pci_link5
pci_link6
pci_link7
atdma0
atrtc0
Interrupt request lines:
8
I/O ports:
0x70-0x71
atpic0
npxisa0
attimer0
acpi_sysresource1
atkbdc0
I/O ports:
0x60
0x64
atkbd0
Interrupt request lines:
1
uart0
Interrupt request lines:
4
I/O ports:
0x3f8-0x3ff
uart1
Interrupt request lines:
3
I/O ports:
0x2f8-0x2ff
acpi_hpet0
I/O memory addresses:
0xfed00000-0xfed03fff
acpi_timer0
ACPI I/O ports:
0x408-0x40b
********************************* VMSTAT *********************************
interrupt total rate
irq1: atkbd0 221 0
irq19: uhci1+ 11272 2
irq20: dc3 958515 238
irq23: dc2 uhci0+ 1377458 342
cpu0: timer 7944706 1975
cpu1: timer 7944673 1975
cpu3: timer 7944676 1975
cpu2: timer 7944664 1975
Total 34126185 8486
***************************************************************************
Dell MoBo
********************************* IFCONFIG *********************************
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:44
inet6 fe80::1:1%dc0 prefixlen 64 scopeid 0x5
nd6 options=1<PERFORMNUD>
media: Ethernet autoselect (none)
status: no carrier
dc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:45
inet6 fe80::230:6eff:fe2d:7f45%dc1 prefixlen 64 scopeid 0x6
inet 192.168.0.186 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
dc2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:46
inet6 fe80::1:1%dc2 prefixlen 64 scopeid 0x7
nd6 options=1<PERFORMNUD>
media: Ethernet autoselect (none)
status: no carrier
dc3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:47
inet6 fe80::230:6eff:fe2d:7f47%dc3 prefixlen 64 scopeid 0x8
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect (none)
status: no carrier
bfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:0b:db:2a:80:81
inet6 fe80::20b:dbff:fe2a:8081%bfe0 prefixlen 64 scopeid 0x9
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect (none)
status: no carrier
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
enc0: flags=0<> metric 0 mtu 1536
pflog0: flags=100<PROMISC> metric 0 mtu 33192
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xd
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
pfsync0: flags=0<> metric 0 mtu 1460
syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
********************************* DMESG *********************************
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p8 #0: Sat May 25 08:07:24 EDT 2013
root at snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.20GHz (2192.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Family = f Model = 2 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x400<CNXT-ID>
real memory = 268435456 (256 MB)
avail memory = 238157824 (227 MB)
ACPI APIC Table: <IntelR AWRDACPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07baca0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07bad40, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07bade0, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, fdf0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xd0000000-0xd7ffffff,0xe0000000-0xe007ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82845M (845M GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 892k stolen memory
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0080000-0xe00803ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 4.0 on pci1
pci2: <PCI bus> on pcib2
dc0: <Intel 21143 10/100BaseTX> port 0xc000-0xc07f mem 0xdd000000-0xdd0003ff irq 16 at device 4.0 on pci2
miibus0: <MII bus> on dc0
lxtphy0: <LXT970 10/100 media interface> PHY 0 on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: [ITHREAD]
dc1: <Intel 21143 10/100BaseTX> port 0xc400-0xc47f mem 0xdd001000-0xdd0013ff irq 17 at device 5.0 on pci2
miibus1: <MII bus> on dc1
lxtphy1: <LXT970 10/100 media interface> PHY 0 on miibus1
lxtphy1: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: [ITHREAD]
dc2: <Intel 21143 10/100BaseTX> port 0xc800-0xc87f mem 0xdd002000-0xdd0023ff irq 18 at device 6.0 on pci2
miibus2: <MII bus> on dc2
lxtphy2: <LXT970 10/100 media interface> PHY 0 on miibus2
lxtphy2: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: [ITHREAD]
dc3: <Intel 21143 10/100BaseTX> port 0xcc00-0xcc7f mem 0xdd003000-0xdd0033ff irq 19 at device 7.0 on pci2
miibus3: <MII bus> on dc3
lxtphy3: <LXT970 10/100 media interface> PHY 0 on miibus3
lxtphy3: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: [ITHREAD]
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xdf000000-0xdf001fff irq 17 at device 9.0 on pci1
miibus4: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus4
bmtphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata0: [ITHREAD]
ata1: <ATA channel> at channel 1 on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1200-KB 5.25" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd4000-0xd57ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 2192898564 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
acd0: CDRW <NEC CD-RW NR-9300A/105B> at ata1-master UDMA33
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen3.2: <Sony> at usbus3
umass0: <Bulk-In, Bulk-Out, Interface> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Sony Card_R/W -CF 2.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da1 at umass-sim0 bus 0 scbus0 target 0 lun 1
da1: <Sony Card_R/W -SM/xD 2.00> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
(probe0:umass-sim0:0:0:2): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI status: Check Condition
(probe0:umass-sim0:0:0:2): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da2 at umass-sim0 bus 0 scbus0 target 0 lun 2
da2: <Sony Card_R/W -SD 2.00> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
(probe0:umass-sim0:0:0:3): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI status: Check Condition
(probe0:umass-sim0:0:0:3): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da3 at umass-sim0 bus 0 scbus0 target 0 lun 3
da3: <Sony Card_R/W -MS 2.00> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
Trying to mount root from cd9660:/dev/iso9660/pfSense
md0.uzip: 2578 x 65536 blocks
pflog0: promiscuous mode enabled
dc2: link state changed to DOWN
dc0: link state changed to UP
dc3: link state changed to DOWN
dc1: link state changed to UP
dc0: link state changed to DOWN
dc0: link state changed to UP
dc0: link state changed to DOWN
********************************* DEVINFO *********************************
nexus0
cryptosoft0
apic0
npx0
ram0
I/O memory addresses:
0x0-0x9fbff
0x100000-0xfeeffff
acpi0
Interrupt request lines:
9
I/O ports:
0x10-0x1f
0x22-0x3f
0x44-0x5f
0x62-0x63
0x65-0x6f
0x74-0x7f
0x91-0x93
0xa2-0xbf
0xe0-0xef
0x400-0x4bf
0x4d0-0x4d1
0x800-0x87f
I/O memory addresses:
0xcc000-0xcffff
0xd5800-0xd7fff
0xe0000-0xeffff
0xf0000-0xfbfff
0xfc000-0xfffff
0xfef0000-0xfefffff
0xfec00000-0xfec00fff
0xfee00000-0xfee00fff
0xffb00000-0xffbfffff
0xfff00000-0xffffffff
cpu0
p4tcc0
cpufreq0
acpi_button0
acpi_sysresource0
pcib0
pci0
I/O ports:
0x500-0x51f
0xe000-0xe0ff
0xe400-0xe43f
I/O memory addresses:
0xd8000000-0xdbffffff
0xe0081000-0xe00811ff
0xe0082000-0xe00820ff
hostb0
vgapci0
I/O memory addresses:
0xd0000000-0xd7ffffff
0xe0000000-0xe007ffff
agp0
uhci0
Interrupt request lines:
16
I/O ports:
0xd800-0xd81f
usbus0
uhub0
uhci1
Interrupt request lines:
19
I/O ports:
0xd000-0xd01f
usbus1
uhub1
uhci2
Interrupt request lines:
18
I/O ports:
0xd400-0xd41f
usbus2
uhub2
ehci0
Interrupt request lines:
23
I/O memory addresses:
0xe0080000-0xe00803ff
usbus3
uhub3
umass0
pcib1
pci1
pcib2
pci2
I/O memory addresses:
0xdd000000-0xdd0003ff
0xdd001000-0xdd0013ff
0xdd002000-0xdd0023ff
0xdd003000-0xdd0033ff
dc0
Interrupt request lines:
16
I/O ports:
0xc000-0xc07f
miibus0
lxtphy0
dc1
Interrupt request lines:
17
I/O ports:
0xc400-0xc47f
miibus1
lxtphy1
dc2
Interrupt request lines:
18
I/O ports:
0xc800-0xc87f
miibus2
lxtphy2
dc3
Interrupt request lines:
19
I/O ports:
0xcc00-0xcc7f
miibus3
lxtphy3
bfe0
Interrupt request lines:
17
I/O memory addresses:
0xdf000000-0xdf001fff
miibus4
bmtphy0
isab0
isa0
orm0
I/O memory addresses:
0xd4000-0xd57ff
pmtimer0
sc0
vga0
I/O ports:
0x3c0-0x3df
I/O memory addresses:
0xa0000-0xbffff
atapci0
I/O ports:
0x170-0x177
0x1f0-0x1f7
0x376
0x3f6
0xf000-0xf00f
ata0
Interrupt request lines:
14
ata1
Interrupt request lines:
15
acd0
acpi_sysresource1
pci_link0
pci_link1
pci_link2
pci_link3
pci_link4
pci_link5
pci_link6
pci_link7
acpi_sysresource2
atpic0
atdma0
attimer0
atrtc0
Interrupt request lines:
8
I/O ports:
0x70-0x71
npxisa0
fdc0
Interrupt request lines:
6
DMA request lines:
2
I/O ports:
0x3f0-0x3f5
0x3f7
fd0
uart0
Interrupt request lines:
4
I/O ports:
0x3f8-0x3ff
ppc0
Interrupt request lines:
7
I/O ports:
0x378-0x37f
ppbus0
plip0
lpt0
ppi0
psmcpnp0
Interrupt request lines:
12
atkbdc0
I/O ports:
0x60
0x64
atkbd0
Interrupt request lines:
1
psm0
Interrupt request lines:
12
acpi_timer0
ACPI I/O ports:
0x408-0x40b
********************************* VMSTAT *********************************
interrupt total rate
irq1: atkbd0 71 0
irq6: fdc0 3 0
irq15: ata1 4233 3
irq16: dc0 uhci0 1049652 908
irq17: dc1 bfe0 903612 782
irq18: dc2 uhci2 783808 678
irq19: dc3 uhci1 655955 567
irq23: ehci0 318 0
cpu0: timer 2310698 2000
Total 5708350 4942
***************************************************************************
Atom D510MO Board running SysRescuCD
********************************* IFCONFIG *********************************
eth0 Link encap:Ethernet HWaddr 00:27:0e:07:48:a0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:44
eth1 Link encap:Ethernet HWaddr 00:30:6e:2d:7f:44
inet6 addr: fe80::230:6eff:fe2d:7f44/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:3076110 errors:1 dropped:0 overruns:0 frame:0
TX packets:2784357 errors:7 dropped:0 overruns:0 carrier:7
collisions:0 txqueuelen:1000
RX bytes:3644494314 (3.3 GiB) TX bytes:2186577478 (2.0 GiB)
Interrupt:21 Base address:0x6c00
eth2 Link encap:Ethernet HWaddr 00:30:6e:2d:7f:45
inet6 addr: fe80::230:6eff:fe2d:7f45/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:2786515 errors:1 dropped:0 overruns:0 frame:0
TX packets:3078422 errors:8 dropped:0 overruns:0 carrier:8
collisions:0 txqueuelen:1000
RX bytes:2186738334 (2.0 GiB) TX bytes:3644669158 (3.3 GiB)
Interrupt:22 Base address:0xc800
eth3 Link encap:Ethernet HWaddr 00:30:6e:2d:7f:46
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::230:6eff:fe2d:7f46/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3046758 errors:2 dropped:0 overruns:0 frame:0
TX packets:2801966 errors:8 dropped:0 overruns:0 carrier:8
collisions:0 txqueuelen:1000
RX bytes:3345589294 (3.1 GiB) TX bytes:2666281900 (2.4 GiB)
Interrupt:23 Base address:0xe400
eth4 Link encap:Ethernet HWaddr 00:30:6e:2d:7f:47
inet addr:192.168.0.186 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::230:6eff:fe2d:7f47/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2804251 errors:2 dropped:0 overruns:0 frame:0
TX packets:3048712 errors:19 dropped:0 overruns:0 carrier:19
collisions:0 txqueuelen:1000
RX bytes:2666452560 (2.4 GiB) TX bytes:3345738750 (3.1 GiB)
Interrupt:20
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
********************************* DMESG *********************************
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.29-std260-i586 (root at catalyst) (gcc version 4.4.6 (Gentoo 4.4.6-r1 p1.0, pie-0.4.5) ) #2 SMP Mon Apr 23 18:26:37 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] BIOS-e820: 0000000000090000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cee98000 (usable)
[ 0.000000] BIOS-e820: 00000000cee98000 - 00000000ceebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000ceebf000 - 00000000cef48000 (usable)
[ 0.000000] BIOS-e820: 00000000cef48000 - 00000000cefbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cefbf000 - 00000000ceff1000 (usable)
[ 0.000000] BIOS-e820: 00000000ceff1000 - 00000000cefff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cefff000 - 00000000cf000000 (usable)
[ 0.000000] BIOS-e820: 00000000cf000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: /D510MO, BIOS MOPNV10N.86A.0516.2011.0331.1730 03/31/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0CF000000 mask FFF000000 uncachable
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 base 0FFFF0000 mask FFFFF0000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fbe50] fbe50
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0036c00000 page 2M
[ 0.000000] 0036c00000 - 0036ffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 36ffe000 @ 17f9000-1800000
[ 0.000000] RAMDISK: 7f7a8000 - 7ffff000
[ 0.000000] Allocated new RAMDISK: 367a7000 - 36ffdb34
[ 0.000000] Move RAMDISK from 000000007f7a8000 - 000000007fffeb33 to 367a7000 - 36ffdb33
[ 0.000000] ACPI: RSDP 000f2060 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT ceffe120 0004C (v01 INTEL MOPNV10N 00000204 01000013)
[ 0.000000] ACPI: FACP ceffd000 000F4 (v03 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: DSDT ceff9000 039A7 (v01 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: FACS cef87000 00040
[ 0.000000] ACPI: APIC ceff8000 00084 (v02 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: MCFG ceff7000 0003C (v01 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: HPET ceff6000 00038 (v01 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: SSDT ceff2000 0377C (v01 INTEL SSDT PM 00000204 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2432MB HIGHMEM available.
[ 0.000000] 879MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 36ffe000
[ 0.000000] low ram: 0 - 36ffe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00036ffe
[ 0.000000] HighMem 0x00036ffe -> 0x000cf000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000008f
[ 0.000000] 0: 0x00000090 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cee98
[ 0.000000] 0: 0x000ceebf -> 0x000cef48
[ 0.000000] 0: 0x000cefbf -> 0x000ceff1
[ 0.000000] 0: 0x000cefff -> 0x000cf000
[ 0.000000] On node 0 totalpages: 847585
[ 0.000000] free_area_init_node: node 0, pgdat c0c70800, node_mem_map f4dc6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 219454 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4865 pages used for memmap
[ 0.000000] HighMem zone: 617557 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f4800000 s25472 r0 d23680 u1048576
[ 0.000000] pcpu-alloc: s25472 r0 d23680 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 840960
[ 0.000000] Kernel command line: scandelay=5 initrd=initram.igz BOOT_IMAGE=rescuecd
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 13565696 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00036ffe:000cf000)
[ 0.000000] Memory: 3325232k/3391488k available (5629k kernel code, 65108k reserved, 3075k data, 6344k init, 2489688k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff574000 - 0xfffff000 (10796 kB)
[ 0.000000] pkmap : 0xff000000 - 0xff400000 (4096 kB)
[ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)
[ 0.000000] .init : 0xc0c81000 - 0xc12b3000 (6344 kB)
[ 0.000000] .data : 0xc097f6f5 - 0xc0c80500 (3075 kB)
[ 0.000000] .text : 0xc0400000 - 0xc097f6f5 (5629 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] CPU 0 irqstacks, hard=f3420000 soft=f3422000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1666.604 MHz processor.
[ 0.002006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.20 BogoMIPS (lpj=1666604)
[ 0.002258] pid_max: default: 32768 minimum: 301
[ 0.002656] Security Framework initialized
[ 0.002786] SELinux: Disabled at boot.
[ 0.003086] Mount-cache hash table entries: 512
[ 0.004220] Initializing cgroup subsys cpuacct
[ 0.004432] Initializing cgroup subsys memory
[ 0.004592] Initializing cgroup subsys devices
[ 0.004715] Initializing cgroup subsys freezer
[ 0.004838] Initializing cgroup subsys net_cls
[ 0.004960] Initializing cgroup subsys blkio
[ 0.005019] Initializing cgroup subsys perf_event
[ 0.005276] CPU: Physical Processor ID: 0
[ 0.005398] CPU: Processor Core ID: 0
[ 0.005517] mce: CPU supports 5 MCE banks
[ 0.005647] CPU0: Thermal monitoring enabled (TM1)
[ 0.005772] using mwait in idle threads.
[ 0.007488] ACPI: Core revision 20110413
[ 0.020109] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.021348] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.031488] CPU0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.031997] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.031997] ... version: 3
[ 0.031997] ... bit width: 40
[ 0.031997] ... generic registers: 2
[ 0.031997] ... value mask: 000000ffffffffff
[ 0.031997] ... max period: 000000007fffffff
[ 0.031997] ... fixed-purpose events: 3
[ 0.031997] ... event mask: 0000000700000003
[ 0.032683] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.033239] CPU 1 irqstacks, hard=f34f0000 soft=f34f2000
[ 0.033245] Booting Node 0, Processors #1
[ 0.033320] smpboot cpu 1: start_ip = 9a000
[ 0.002999] Initializing CPU#1
[ 0.002999] calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=4280037422 >=post_end=5068876
[ 0.105039] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.105743] CPU 2 irqstacks, hard=f34fe000 soft=f3500000
[ 0.105749] #2
[ 0.105787] smpboot cpu 2: start_ip = 9a000
[ 0.002999] Initializing CPU#2
[ 0.177981] TSC synchronization [CPU#0 -> CPU#2]:
[ 0.177981] Measured 50 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.177981] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.178017] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.178998] CPU 3 irqstacks, hard=f3514000 soft=f3516000
[ 0.179003] #3 Ok.
[ 0.179118] smpboot cpu 3: start_ip = 9a000
[ 0.002999] Initializing CPU#3
[ 0.250055] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.250351] Brought up 4 CPUs
[ 0.250474] Total of 4 processors activated (13332.70 BogoMIPS).
[ 0.252327] devtmpfs: initialized
[ 0.252985] PM: Registering ACPI NVS region at cef48000 (487424 bytes)
[ 0.255763] atomic64 test passed for i386+ platform with CX8 and with SSE
[ 0.255945] Time: 16:17:04 Date: 05/27/13
[ 0.256208] NET: Registered protocol family 16
[ 0.256799] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.256980] ACPI: bus type pci registered
[ 0.257491] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.257711] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.257976] PCI: Using MMCONFIG for extended config space
[ 0.258104] PCI: Using configuration type 1 for base access
[ 0.261260] bio: create slab <bio-0> at 0
[ 0.264169] ACPI: EC: Look up EC in DSDT
[ 0.276042] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.278229] ACPI: Interpreter enabled
[ 0.278356] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.278660] ACPI: Using IOAPIC for interrupt routing
[ 0.289958] ACPI: No dock devices found.
[ 0.289974] HEST: Table not found.
[ 0.290099] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.290573] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.291363] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.291973] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.292105] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.292972] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xf7ffffff]
[ 0.293199] pci 0000:00:00.0: [8086:a000] type 0 class 0x000600
[ 0.293261] pci 0000:00:02.0: [8086:a001] type 0 class 0x000300
[ 0.293277] pci 0000:00:02.0: reg 10: [mem 0xe0300000-0xe037ffff]
[ 0.293287] pci 0000:00:02.0: reg 14: [io 0x30c0-0x30c7]
[ 0.293298] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.293308] pci 0000:00:02.0: reg 1c: [mem 0xe0200000-0xe02fffff]
[ 0.293406] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.293517] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.293526] pci 0000:00:1c.0: PME# disabled
[ 0.293564] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.293680] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.293688] pci 0000:00:1c.1: PME# disabled
[ 0.293726] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.293840] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.293848] pci 0000:00:1c.2: PME# disabled
[ 0.293994] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.294109] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.294118] pci 0000:00:1c.3: PME# disabled
[ 0.294161] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.294223] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.294278] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.294352] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.294415] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.294489] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.294547] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.294615] pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f]
[ 0.294684] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.294715] pci 0000:00:1d.7: reg 10: [mem 0xe0380400-0xe03807ff]
[ 0.294838] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.294847] pci 0000:00:1d.7: PME# disabled
[ 0.294878] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.294990] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.295095] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.295293] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.295319] pci 0000:00:1f.2: reg 10: [io 0x30b8-0x30bf]
[ 0.295335] pci 0000:00:1f.2: reg 14: [io 0x30cc-0x30cf]
[ 0.295351] pci 0000:00:1f.2: reg 18: [io 0x30b0-0x30b7]
[ 0.295366] pci 0000:00:1f.2: reg 1c: [io 0x30c8-0x30cb]
[ 0.295382] pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af]
[ 0.295398] pci 0000:00:1f.2: reg 24: [mem 0xe0380000-0xe03803ff]
[ 0.295447] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.295455] pci 0000:00:1f.2: PME# disabled
[ 0.295479] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.295550] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.295689] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.295718] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.295762] pci 0000:01:00.0: reg 18: [mem 0xe0004000-0xe0004fff 64bit pref]
[ 0.295793] pci 0000:01:00.0: reg 20: [mem 0xe0000000-0xe0003fff 64bit pref]
[ 0.295814] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.295912] pci 0000:01:00.0: supports D1 D2
[ 0.295918] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.295928] pci 0000:01:00.0: PME# disabled
[ 0.297998] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.298128] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.298139] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.298154] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.298223] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.298350] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.298359] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.298371] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.298440] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.298567] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.298577] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.298589] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.298654] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.298783] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
[ 0.298792] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.298805] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.298859] pci 0000:05:00.0: [8086:b154] type 1 class 0x000604
[ 0.299019] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[ 0.299157] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.299167] pci 0000:00:1e.0: bridge window [mem 0xe0100000-0xe01fffff]
[ 0.299179] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.299187] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.299194] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.299201] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.299208] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.299271] pci 0000:06:04.0: [1011:0019] type 0 class 0x000200
[ 0.299299] pci 0000:06:04.0: reg 10: [io 0x1180-0x11ff]
[ 0.299319] pci 0000:06:04.0: reg 14: [mem 0xe0100c00-0xe0100fff]
[ 0.299399] pci 0000:06:04.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
[ 0.299440] pci 0000:06:05.0: [1011:0019] type 0 class 0x000200
[ 0.299467] pci 0000:06:05.0: reg 10: [io 0x1100-0x117f]
[ 0.299488] pci 0000:06:05.0: reg 14: [mem 0xe0100800-0xe0100bff]
[ 0.299565] pci 0000:06:05.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
[ 0.299605] pci 0000:06:06.0: [1011:0019] type 0 class 0x000200
[ 0.299632] pci 0000:06:06.0: reg 10: [io 0x1080-0x10ff]
[ 0.299653] pci 0000:06:06.0: reg 14: [mem 0xe0100400-0xe01007ff]
[ 0.299732] pci 0000:06:06.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
[ 0.299771] pci 0000:06:07.0: [1011:0019] type 0 class 0x000200
[ 0.299800] pci 0000:06:07.0: reg 10: [io 0x1000-0x107f]
[ 0.299820] pci 0000:06:07.0: reg 14: [mem 0xe0100000-0xe01003ff]
[ 0.299901] pci 0000:06:07.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
[ 0.299993] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 0.300126] pci 0000:05:00.0: bridge window [io 0x1000-0x1fff]
[ 0.300136] pci 0000:05:00.0: bridge window [mem 0xe0100000-0xe01fffff]
[ 0.300152] pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.300198] pci_bus 0000:00: on NUMA node 0
[ 0.300207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.300525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.300914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.301051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.301176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.301298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.301480] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.301608] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.301817] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.310568] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.311112] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.311788] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.312357] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.312899] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.313466] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.314024] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.314565] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.315155] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.315385] vgaarb: loaded
[ 0.315502] vgaarb: bridge control possible 0000:00:02.0
[ 0.315923] SCSI subsystem initialized
[ 0.316026] libata version 3.00 loaded.
[ 0.316144] usbcore: registered new interface driver usbfs
[ 0.316306] usbcore: registered new interface driver hub
[ 0.316442] usbcore: registered new device driver usb
[ 0.317034] PCI: Using ACPI for IRQ routing
[ 0.319102] PCI: pci_cache_line_size set to 64 bytes
[ 0.319246] reserve RAM buffer: 000000000008f000 - 000000000008ffff
[ 0.319253] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.319259] reserve RAM buffer: 00000000cee98000 - 00000000cfffffff
[ 0.319267] reserve RAM buffer: 00000000cef48000 - 00000000cfffffff
[ 0.319274] reserve RAM buffer: 00000000ceff1000 - 00000000cfffffff
[ 0.319280] reserve RAM buffer: 00000000cf000000 - 00000000cfffffff
[ 0.319564] NetLabel: Initializing
[ 0.319683] NetLabel: domain hash size = 128
[ 0.319803] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.319945] NetLabel: unlabeled traffic allowed by default
[ 0.319979] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.320119] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.320351] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.323998] Switching to clocksource hpet
[ 0.324298] Switched to NOHz mode on CPU #2
[ 0.324620] Switched to NOHz mode on CPU #0
[ 0.324712] Switched to NOHz mode on CPU #3
[ 0.324788] Switched to NOHz mode on CPU #1
[ 0.343582] pnp: PnP ACPI init
[ 0.343737] ACPI: bus type pnp registered
[ 0.344193] pnp 00:00: [bus 00-3f]
[ 0.344200] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.344211] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.344218] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.344224] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.344231] pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
[ 0.344336] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.344384] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.344391] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.344397] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.344403] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.344409] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.344415] pnp 00:01: [mem 0x000c0000-0x000dffff]
[ 0.344421] pnp 00:01: [mem 0x000e0000-0x000fffff]
[ 0.344427] pnp 00:01: [mem 0xfff00000-0xffffffff]
[ 0.344537] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.344672] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.344803] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.344932] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.345086] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.345219] system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.345354] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.345488] system 00:01: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.345622] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.345939] pnp 00:02: [io 0x0000-0x000f]
[ 0.345946] pnp 00:02: [io 0x0081-0x0083]
[ 0.345952] pnp 00:02: [io 0x0087]
[ 0.345957] pnp 00:02: [io 0x0089-0x008b]
[ 0.345962] pnp 00:02: [io 0x008f]
[ 0.345968] pnp 00:02: [io 0x00c0-0x00df]
[ 0.345973] pnp 00:02: [dma 4]
[ 0.346057] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.346085] pnp 00:03: [io 0x0070-0x0071]
[ 0.346091] pnp 00:03: [io 0x0074-0x0077]
[ 0.346111] pnp 00:03: [irq 8]
[ 0.346179] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.346210] pnp 00:04: [io 0x00f0]
[ 0.346222] pnp 00:04: [irq 13]
[ 0.346286] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.346315] pnp 00:05: [io 0x0061]
[ 0.346383] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.346414] pnp 00:06: [io 0x0500-0x053f]
[ 0.346420] pnp 00:06: [io 0x0400-0x047f]
[ 0.346425] pnp 00:06: [io 0x0092]
[ 0.346431] pnp 00:06: [io 0x0680-0x06ff]
[ 0.346436] pnp 00:06: [io 0x0010-0x001f]
[ 0.346442] pnp 00:06: [io 0x0072-0x0073]
[ 0.346447] pnp 00:06: [io 0x0080]
[ 0.346452] pnp 00:06: [io 0x0084-0x0086]
[ 0.346458] pnp 00:06: [io 0x0088]
[ 0.346463] pnp 00:06: [io 0x008c-0x008e]
[ 0.346469] pnp 00:06: [io 0x0090-0x009f]
[ 0.346474] pnp 00:06: [io 0x0295-0x0296]
[ 0.346588] system 00:06: [io 0x0500-0x053f] has been reserved
[ 0.346720] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.346847] system 00:06: [io 0x0680-0x06ff] has been reserved
[ 0.346974] system 00:06: [io 0x0295-0x0296] has been reserved
[ 0.347124] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.347247] pnp 00:07: [io 0x0060]
[ 0.347253] pnp 00:07: [io 0x0064]
[ 0.347266] pnp 00:07: [irq 1]
[ 0.347354] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.347905] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.347918] pnp 00:08: [irq 4]
[ 0.348113] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.348435] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.348448] pnp 00:09: [irq 3]
[ 0.348618] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.348678] pnp 00:0a: [mem 0xfec00000-0xfec000ff]
[ 0.348756] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.348862] pnp 00:0b: [mem 0xfed00000-0xfed03fff]
[ 0.348941] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.348964] pnp: PnP ACPI: found 12 devices
[ 0.349108] ACPI: ACPI bus type pnp unregistered
[ 0.388260] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.388482] pci 0000:06:04.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
[ 0.388700] pci 0000:06:05.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
[ 0.388916] pci 0000:06:06.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
[ 0.389151] pci 0000:06:07.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
[ 0.389370] PCI: max bus depth: 2 pci_try_num: 3
[ 0.389455] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0400000-0xe04fffff]
[ 0.389592] pci 0000:00:1e.0: BAR 15: assigned [mem 0xe0500000-0xe05fffff pref]
[ 0.389805] pci 0000:00:1c.3: BAR 14: assigned [mem 0xe0600000-0xe07fffff]
[ 0.389938] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe0800000-0xe09fffff 64bit pref]
[ 0.390171] pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.390305] pci 0000:00:1c.2: BAR 14: assigned [mem 0xe0a00000-0xe0bfffff]
[ 0.390442] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe0c00000-0xe0dfffff 64bit pref]
[ 0.390659] pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.390793] pci 0000:00:1c.1: BAR 14: assigned [mem 0xe0e00000-0xe0ffffff]
[ 0.390928] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe1000000-0xe11fffff 64bit pref]
[ 0.391160] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.391295] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0020000-0xe003ffff pref]
[ 0.391509] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.391637] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.391772] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.391905] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.392139] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.392267] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.392401] pci 0000:00:1c.1: bridge window [mem 0xe0e00000-0xe0ffffff]
[ 0.392537] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe11fffff 64bit pref]
[ 0.392755] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.392881] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.393027] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe0bfffff]
[ 0.393163] pci 0000:00:1c.2: bridge window [mem 0xe0c00000-0xe0dfffff 64bit pref]
[ 0.393380] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.393508] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.393640] pci 0000:00:1c.3: bridge window [mem 0xe0600000-0xe07fffff]
[ 0.393773] pci 0000:00:1c.3: bridge window [mem 0xe0800000-0xe09fffff 64bit pref]
[ 0.393989] pci 0000:05:00.0: BAR 15: assigned [mem 0xe0500000-0xe05fffff pref]
[ 0.394217] pci 0000:06:04.0: BAR 6: assigned [mem 0xe0500000-0xe053ffff pref]
[ 0.394428] pci 0000:06:05.0: BAR 6: assigned [mem 0xe0540000-0xe057ffff pref]
[ 0.394637] pci 0000:06:06.0: BAR 6: assigned [mem 0xe0580000-0xe05bffff pref]
[ 0.394849] pci 0000:06:07.0: BAR 6: assigned [mem 0xe05c0000-0xe05fffff pref]
[ 0.395074] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 0.395203] pci 0000:05:00.0: bridge window [io 0x1000-0x1fff]
[ 0.395338] pci 0000:05:00.0: bridge window [mem 0xe0100000-0xe01fffff]
[ 0.395473] pci 0000:05:00.0: bridge window [mem 0xe0500000-0xe05fffff pref]
[ 0.395691] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[ 0.395817] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.395949] pci 0000:00:1e.0: bridge window [mem 0xe0100000-0xe01fffff]
[ 0.396099] pci 0000:00:1e.0: bridge window [mem 0xe0500000-0xe05fffff pref]
[ 0.396340] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.396477] pci 0000:00:1c.0: setting latency timer to 64
[ 0.396489] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.396625] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.396761] pci 0000:00:1c.1: setting latency timer to 64
[ 0.396773] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.396905] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.397057] pci 0000:00:1c.2: setting latency timer to 64
[ 0.397070] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.397204] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.397340] pci 0000:00:1c.3: setting latency timer to 64
[ 0.397354] pci 0000:00:1e.0: setting latency timer to 64
[ 0.397370] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.397377] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.397383] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.397390] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff]
[ 0.397396] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.397403] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.397410] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.397417] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.397423] pci_bus 0000:02: resource 1 [mem 0xe0e00000-0xe0ffffff]
[ 0.397430] pci_bus 0000:02: resource 2 [mem 0xe1000000-0xe11fffff 64bit pref]
[ 0.397437] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.397444] pci_bus 0000:03: resource 1 [mem 0xe0a00000-0xe0bfffff]
[ 0.397451] pci_bus 0000:03: resource 2 [mem 0xe0c00000-0xe0dfffff 64bit pref]
[ 0.397458] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.397464] pci_bus 0000:04: resource 1 [mem 0xe0600000-0xe07fffff]
[ 0.397471] pci_bus 0000:04: resource 2 [mem 0xe0800000-0xe09fffff 64bit pref]
[ 0.397478] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
[ 0.397485] pci_bus 0000:05: resource 1 [mem 0xe0100000-0xe01fffff]
[ 0.397492] pci_bus 0000:05: resource 2 [mem 0xe0500000-0xe05fffff pref]
[ 0.397499] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.397505] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.397511] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.397518] pci_bus 0000:05: resource 7 [mem 0xd0000000-0xf7ffffff]
[ 0.397525] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.397531] pci_bus 0000:06: resource 1 [mem 0xe0100000-0xe01fffff]
[ 0.397538] pci_bus 0000:06: resource 2 [mem 0xe0500000-0xe05fffff pref]
[ 0.397716] NET: Registered protocol family 2
[ 0.398048] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.398551] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.399743] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.400349] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.400486] TCP reno registered
[ 0.400612] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.400753] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.401516] NET: Registered protocol family 1
[ 0.401924] RPC: Registered named UNIX socket transport module.
[ 0.402079] RPC: Registered udp transport module.
[ 0.402202] RPC: Registered tcp transport module.
[ 0.402325] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.402474] pci 0000:00:02.0: Boot video device
[ 0.402522] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.402678] pci 0000:00:1d.0: PCI INT A disabled
[ 0.402813] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.402962] pci 0000:00:1d.1: PCI INT B disabled
[ 0.403115] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.403266] pci 0000:00:1d.2: PCI INT C disabled
[ 0.403397] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.403543] pci 0000:00:1d.3: PCI INT D disabled
[ 0.403670] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.418052] pci 0000:00:1d.7: PCI INT A disabled
[ 0.418210] PCI: CLS 64 bytes, default 64
[ 1.630244] Trying to unpack rootfs image as initramfs...
[ 3.709983] Freeing initrd memory: 8540k freed
[ 3.717795] apm: BIOS not found.
[ 3.718195] Intel AES-NI instructions are not detected.
[ 3.718698] audit: initializing netlink socket (disabled)
[ 3.718838] type=2000 audit(1369671426.717:1): initialized
[ 3.787418] highmem bounce pool size: 64 pages
[ 3.787541] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.806563] VFS: Disk quotas dquot_6.5.2
[ 3.807074] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.809043] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.810173] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.810298] NTFS driver 2.1.30 [Flags: R/O].
[ 3.810763] fuse init (API version 7.16)
[ 3.811495] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3.815553] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3.817435] SGI XFS Quota Management subsystem
[ 3.818267] Btrfs loaded
[ 3.818784] aufs 3.0-20120402
[ 3.821031] msgmni has been set to 1648
[ 3.822139] alg: No test for stdrng (krng)
[ 3.822271] NET: Registered protocol family 38
[ 3.822457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.822762] io scheduler noop registered
[ 3.822878] io scheduler deadline registered
[ 3.823065] io scheduler cfq registered (default)
[ 3.823395] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.823465] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 3.823583] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.823645] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 3.823754] pcieport 0000:00:1c.2: setting latency timer to 64
[ 3.823815] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 3.823929] pcieport 0000:00:1c.3: setting latency timer to 64
[ 3.823990] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 3.824199] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.824402] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.824523] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.825224] intel_idle: MWAIT substates: 0x10
[ 3.825249] intel_idle: v0.4 model 0x1C
[ 3.825254] intel_idle: lapic_timer_reliable_states 0x2
[ 3.825493] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 3.825697] ACPI: Sleep Button [SLPB]
[ 3.825942] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.826164] ACPI: Power Button [PWRF]
[ 3.826535] ACPI: acpi_idle yielding to intel_idle
[ 3.830264] ERST: Table is not found!
[ 3.830459] isapnp: Scanning for PnP cards...
[ 4.187129] isapnp: No Plug & Play device found
[ 4.187418] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.208263] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.237728] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 4.313776] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.334819] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 4.335698] Non-volatile memory driver v1.3
[ 4.335813] Linux agpgart interface v0.103
[ 4.336200] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 4.336626] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 4.337246] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 4.337598] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 4.342232] brd: module loaded
[ 4.343720] loop: AES key scrubbing enabled
[ 4.343833] loop: loaded (max 8 devices)
[ 4.344213] ata_piix 0000:00:1f.2: version 2.13
[ 4.344240] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.344368] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.495080] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.495778] scsi0 : ata_piix
[ 4.496162] scsi1 : ata_piix
[ 4.496644] ata1: SATA max UDMA/133 cmd 0x30b8 ctl 0x30cc bmdma 0x30a0 irq 19
[ 4.496765] ata2: SATA max UDMA/133 cmd 0x30b0 ctl 0x30c8 bmdma 0x30a8 irq 19
[ 4.497078] Fixed MDIO Bus: probed
[ 4.497373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.497528] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.497679] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.497687] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.497915] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 4.498172] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 4.498301] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.502307] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4.502342] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0380400
[ 4.512038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.512216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.512337] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.512530] usb usb1: Product: EHCI Host Controller
[ 4.512644] usb usb1: Manufacturer: Linux 3.0.29-std260-i586 ehci_hcd
[ 4.512762] usb usb1: SerialNumber: 0000:00:1d.7
[ 4.513142] hub 1-0:1.0: USB hub found
[ 4.513259] hub 1-0:1.0: 8 ports detected
[ 4.513556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.513702] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.513892] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.514048] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.514056] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.514278] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.514509] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 4.514698] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.514818] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.515032] usb usb2: Product: UHCI Host Controller
[ 4.515146] usb usb2: Manufacturer: Linux 3.0.29-std260-i586 uhci_hcd
[ 4.515263] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.515605] hub 2-0:1.0: USB hub found
[ 4.515723] hub 2-0:1.0: 2 ports detected
[ 4.515983] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.516138] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.516145] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.516352] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 4.516580] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 4.516768] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.516888] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.517103] usb usb3: Product: UHCI Host Controller
[ 4.517217] usb usb3: Manufacturer: Linux 3.0.29-std260-i586 uhci_hcd
[ 4.517336] usb usb3: SerialNumber: 0000:00:1d.1
[ 4.517668] hub 3-0:1.0: USB hub found
[ 4.517785] hub 3-0:1.0: 2 ports detected
[ 4.518059] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.518190] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.518197] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.518410] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 4.518670] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 4.518859] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.518980] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.519196] usb usb4: Product: UHCI Host Controller
[ 4.519310] usb usb4: Manufacturer: Linux 3.0.29-std260-i586 uhci_hcd
[ 4.519427] usb usb4: SerialNumber: 0000:00:1d.2
[ 4.519761] hub 4-0:1.0: USB hub found
[ 4.519877] hub 4-0:1.0: 2 ports detected
[ 4.520149] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 4.520282] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.520289] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.520499] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 4.520745] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
[ 4.520928] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.521074] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.521267] usb usb5: Product: UHCI Host Controller
[ 4.521380] usb usb5: Manufacturer: Linux 3.0.29-std260-i586 uhci_hcd
[ 4.521498] usb usb5: SerialNumber: 0000:00:1d.3
[ 4.521840] hub 5-0:1.0: USB hub found
[ 4.521956] hub 5-0:1.0: 2 ports detected
[ 4.522304] usbcore: registered new interface driver usbserial
[ 4.522439] USB Serial support registered for generic
[ 4.522578] usbcore: registered new interface driver usbserial_generic
[ 4.522696] usbserial: USB Serial Driver core
[ 4.522903] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.523042] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 4.523799] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.524060] mousedev: PS/2 mouse device common for all mice
[ 4.524521] rtc_cmos 00:03: RTC can wake from S4
[ 4.524809] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.524962] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.525387] device-mapper: uevent: version 1.0.3
[ 4.525710] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel at redhat.com
[ 4.526257] cpuidle: using governor ladder
[ 4.526604] cpuidle: using governor menu
[ 4.527150] EFI Variables Facility v0.08 2004-May-17
[ 4.527676] usbcore: registered new interface driver usbhid
[ 4.527793] usbhid: USB HID core driver
[ 4.528112] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.528250] TCP cubic registered
[ 4.528356] Initializing XFRM netlink socket
[ 4.528478] NET: Registered protocol family 17
[ 4.528639] Registering the dns_resolver key type
[ 4.528788] Using IPI No-Shortcut mode
[ 4.529161] PM: Hibernation image not present or could not be loaded.
[ 4.529184] registered taskstats version 1
[ 4.536347] IMA: No TPM chip found, activating TPM-bypass!
[ 4.537132] Magic number: 13:439:288
[ 4.537298] tty tty21: hash matches
[ 4.537492] rtc_cmos 00:03: setting system clock to 2013-05-27 16:17:08 UTC (1369671428)
[ 4.537835] Initializing network drop monitor service
[ 4.555078] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.670668] Freeing unused kernel memory: 6344k freed
[ 4.675659] Write protecting the kernel text: 5632k
[ 4.675861] Write protecting the kernel read-only data: 2364k
[ 4.815058] usb 1-7: new high speed USB device number 2 using ehci_hcd
[ 4.931893] usb 1-7: New USB device found, idVendor=0951, idProduct=1603
[ 4.931901] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.931908] usb 1-7: Product: DataTraveler 2.0
[ 4.931913] usb 1-7: Manufacturer: Kingston
[ 4.931918] usb 1-7: SerialNumber: 0019E0009E7E5A8A11160136
[ 5.351848] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.351895] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.351971] r8169 0000:01:00.0: setting latency timer to 64
[ 5.352112] r8169 0000:01:00.0: irq 44 for MSI/MSI-X
[ 5.352472] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xf7dc0000, 00:27:0e:07:48:a0, XID 081000c0 IRQ 44
[ 5.359921] [drm] Initialized drm 1.1.0 20060810
[ 5.377143] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[ 5.377252] tulip 0000:06:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.383941] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.383959] i915 0000:00:02.0: setting latency timer to 64
[ 5.386974] tulip0: EEPROM default media type Autosense
[ 5.386984] tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
[ 5.389936] Initializing USB Mass Storage driver...
[ 5.398323] tulip0: MII transceiver #0 config 1000 status 7809 advertising 01e1
[ 5.398633] net eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0xe0100c00, 00:30:6e:2d:7f:44, IRQ 21
[ 5.398701] tulip 0000:06:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.401685] scsi2 : usb-storage 1-7:1.0
[ 5.401909] usbcore: registered new interface driver usb-storage
[ 5.401917] USB Mass Storage support registered.
[ 5.408242] tulip1: EEPROM default media type Autosense
[ 5.408251] tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
[ 5.419622] tulip1: MII transceiver #0 config 1000 status 7809 advertising 01e1
[ 5.419957] net eth2: Digital DS21142/43 Tulip rev 65 at MMIO 0xe0100800, 00:30:6e:2d:7f:45, IRQ 22
[ 5.420047] tulip 0000:06:06.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.429535] tulip2: EEPROM default media type Autosense
[ 5.429544] tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
[ 5.440887] tulip2: MII transceiver #0 config 1000 status 7809 advertising 01e1
[ 5.448116] net eth3: Digital DS21142/43 Tulip rev 65 at MMIO 0xe0100400, 00:30:6e:2d:7f:46, IRQ 23
[ 5.448196] tulip 0000:06:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.457746] tulip3: EEPROM default media type Autosense
[ 5.457756] tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
[ 5.469095] tulip3: MII transceiver #0 config 1000 status 7809 advertising 01e1
[ 5.469361] net eth4: Digital DS21142/43 Tulip rev 65 at MMIO 0xe0100000, 00:30:6e:2d:7f:47, IRQ 20
[ 5.489544] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 5.489561] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.489569] [drm] Driver supports precise vblank timestamp query.
[ 5.489684] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.668584] [drm] initialized overlay support
[ 5.740337] fbcon: inteldrmfb (fb0) is primary device
[ 5.768793] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[ 5.804560] fixme: max PWM is zero.
[ 5.814728] Console: switching to colour frame buffer device 128x48
[ 5.824852] fb0: inteldrmfb frame buffer device
[ 5.824856] drm: registered panic notifier
[ 5.824877] No ACPI video bus found
[ 5.824963] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.405081] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 6.407263] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 6.408189] sd 2:0:0:0: [sda] 15679488 512-byte logical blocks: (8.02 GB/7.47 GiB)
[ 6.408783] sd 2:0:0:0: [sda] Write Protect is off
[ 6.408791] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 6.409410] sd 2:0:0:0: [sda] No Caching mode page present
[ 6.409417] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 6.412793] sd 2:0:0:0: [sda] No Caching mode page present
[ 6.412802] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 6.413581] sda: sda1
[ 6.416109] sd 2:0:0:0: [sda] No Caching mode page present
[ 6.416117] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 6.416124] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 33.889558] md: linear personality registered for level -1
[ 33.892913] md: multipath personality registered for level -4
[ 33.896355] md: raid0 personality registered for level 0
[ 33.900423] md: raid1 personality registered for level 1
[ 33.903749] async_tx: api initialized (async)
[ 33.905208] xor: automatically using best checksumming function: pIII_sse
[ 33.910035] pIII_sse : 4948.000 MB/sec
[ 33.910042] xor: using function: pIII_sse (4948.000 MB/sec)
[ 33.929235] raid6: int32x1 183 MB/s
[ 33.946242] raid6: int32x2 265 MB/s
[ 33.963050] raid6: int32x4 277 MB/s
[ 33.980049] raid6: int32x8 281 MB/s
[ 33.997113] raid6: mmxx1 367 MB/s
[ 34.014050] raid6: mmxx2 671 MB/s
[ 34.031072] raid6: sse1x1 289 MB/s
[ 34.048041] raid6: sse1x2 488 MB/s
[ 34.065101] raid6: sse2x1 566 MB/s
[ 34.082071] raid6: sse2x2 964 MB/s
[ 34.082076] raid6: using algorithm sse2x2 (964 MB/s)
[ 34.085948] md: raid6 personality registered for level 6
[ 34.085957] md: raid5 personality registered for level 5
[ 34.085963] md: raid4 personality registered for level 4
[ 34.097067] md: raid10 personality registered for level 10
[ 34.105233] mdadm: sending ioctl 1261 to a partition!
[ 34.105242] mdadm: sending ioctl 1261 to a partition!
[ 34.106440] mdadm: sending ioctl 1261 to a partition!
[ 34.106446] mdadm: sending ioctl 1261 to a partition!
[ 34.106925] mdadm: sending ioctl 1261 to a partition!
[ 34.106932] mdadm: sending ioctl 1261 to a partition!
[ 34.107684] mdadm: sending ioctl 1261 to a partition!
[ 34.107690] mdadm: sending ioctl 1261 to a partition!
[ 34.108196] mdadm: sending ioctl 800c0910 to a partition!
[ 34.108203] mdadm: sending ioctl 800c0910 to a partition!
[ 34.692805] UDF-fs: No partition found (1)
[ 35.115890] aufs test_add:261:mount[357]: uid/gid/perm /squashfs 0/0/0755, 0/0/01777
[ 35.124549] aufs test_add:261:mount[362]: uid/gid/perm /boot 0/0/0755, 0/0/01777
[ 38.843865] udevd[727]: starting version 171
[ 38.922910] udevd[727]: converting old udev database
[ 39.330653] iTCO_vendor_support: vendor-support=0
[ 39.346679] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 39.362933] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 39.363224] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
[ 39.363403] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 102.433986] r8169 0000:01:00.0: eth0: link down
[ 102.846725] NET: Registered protocol family 10
[ 102.847474] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 105.801499] sshd (1220): /proc/1220/oom_adj is deprecated, please use /proc/1220/oom_score_adj instead.
[ 107.909566] md: Autodetecting RAID arrays.
[ 107.909576] md: Scanned 0 and added 0 devices.
[ 107.909581] md: autorun ...
[ 107.909586] md: ... autorun DONE.
[ 110.488489] aufs au_new_inode:412:dircolors[1607]: Warning: Un-notified UDBA or repeatedly renamed dir, b1, squashfs, LC_MESSAGES, hi3269, i95.
[ 112.946057] eth4: no IPv6 routers present
[ 112.946067] eth3: no IPv6 routers present
[ 113.650042] eth2: no IPv6 routers present
[ 113.730022] eth1: no IPv6 routers present
[ 210.760589] net eth4: Setting full-duplex based on MII#0 link partner capability of 45e1
[ 532.608593] net eth3: Setting full-duplex based on MII#0 link partner capability of 45e1
[ 1609.456611] net eth1: Setting full-duplex based on MII#0 link partner capability of 45e1
[ 1615.472601] net eth2: Setting full-duplex based on MII#0 link partner capability of 45e1
[ 2890.976869] net eth4: Setting full-duplex based on MII#0 link partner capability of 45e1
[ 2898.962026] eth4: no IPv6 routers present
[ 2899.064934] net eth3: Setting full-duplex based on MII#0 link partner capability of 45e1
[ 2906.098137] eth3: no IPv6 routers present
[ 3343.330104] eth2: no IPv6 routers present
[ 3347.850038] eth1: no IPv6 routers present
********************************* /proc/interrupts *********************************
CPU0 CPU1 CPU2 CPU3
0: 136 5 5 3 IO-APIC-edge timer
1: 470 481 460 478 IO-APIC-edge i8042
8: 9 9 10 8 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb5
18: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 0 0 0 0 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3
20: 892747 892146 889976 893568 IO-APIC-fasteoi eth4
21: 1164504 1177035 1164771 1175556 IO-APIC-fasteoi eth1
22: 867889 855366 867630 856839 IO-APIC-fasteoi eth2
23: 1001187 1001768 1003957 1000357 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2, eth3
44: 0 0 0 0 PCI-MSI-edge eth0
45: 0 0 0 0 PCI-MSI-edge i915
NMI: 183 183 187 187 Non-maskable interrupts
LOC: 48637 19354 23393 19669 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 183 183 187 187 Performance monitoring interrupts
IWI: 0 0 0 0 IRQ work interrupts
RES: 12023 11462 12469 11391 Rescheduling interrupts
CAL: 726 120 688 169 Function call interrupts
TLB: 254 750 209 659 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 16 16 16 16 Machine check polls
ERR: 0
MIS: 0
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list