kern/180044: [ata] SATA Controller will not negotiate SATA300 only SATA150
Keith Simonsen
bangel at elite.net
Thu Jun 27 23:40:00 UTC 2013
>Number: 180044
>Category: kern
>Synopsis: [ata] SATA Controller will not negotiate SATA300 only SATA150
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Jun 27 23:40:00 UTC 2013
>Closed-Date:
>Last-Modified:
>Originator: Keith Simonsen
>Release: FreeBSD 9.1-PRERELEASE amd64
>Organization:
>Environment:
System: FreeBSD sup-00 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #1: Wed Sep 19 13:49:40 PDT 2012 root at sup-00:/usr/obj/usr/src/sys/SUP00 amd64
atapci1: <Intel 63XXESB2 SATA300 controller>
>Description:
Below sata controller will only work at SATA150, multiple vendor SATAII and SATAIII drives have been used. Related PR: kern/127517 from FreeBSD 7.x. I had this same behavior with 8.x on this server.
atapci1: <Intel 63XXESB2 SATA300 controller> port 0xed00-0xed07,0xec80-0xec83,0xec00-0xec07,0xeb00-0xeb03,0xea80-0xea8f mem 0xfdfff400-0xfdfff7ff irq 19 at device 31.2 on pci0
Drives:
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <ST3160812AS 3.AAE> ATA-7 SATA 2.x device
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada1 at ata2 bus 0 scbus1 target 1 lun 0
ada1: <SAMSUNG HD204UI 1AQ10001> ATA-8 SATA 2.x device
ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2 at ata3 bus 0 scbus2 target 0 lun 0
ada2: <SAMSUNG HD204UI 1AQ10001> ATA-8 SATA 2.x device
ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3 at ata3 bus 0 scbus2 target 1 lun 0
ada3: <OCZ-AGILITY3 2.15> ATA-8 SATA 3.x device
ada3: Serial Number OCZ-13813M2Y24ER5311
ada3: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
Info from verbose boot: (unsure if relevant)
pci0: child atapci1 requested type 4 for rid 0x24, but the BAR says it is an memio
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
ata2: reset tp1 mask=03 ostat0=80 ostat1=50
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=50 devices=0x3
ata3: SATA reset: ports status=0x0a
ata3: reset tp1 mask=03 ostat0=50 ostat1=50
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=50 devices=0x3
pciconf output:
atapci1 at pci0:0:31:2: class=0x01018f card=0x00231170 chip=0x26808086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset SATA IDE Controller'
class = mass storage
subclass = ATA
>How-To-Repeat:
Boot machine with SATAII/III drives and they only negotiate SATA150.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list