kern/179299: Intel X540-T2 - unstable driver
Maxim
sysop at prisjakt.nu
Tue Jun 4 13:50:00 UTC 2013
>Number: 179299
>Category: kern
>Synopsis: Intel X540-T2 - unstable driver
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Jun 04 13:50:00 UTC 2013
>Closed-Date:
>Last-Modified:
>Originator: Maxim
>Release: 9.1-STABLE
>Organization:
>Environment:
FreeBSD nfs2 9.1-STABLE FreeBSD 9.1-STABLE #1: Tue May 21 21:42:21 CEST 2013 root at nfs2:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
Hi,
I have two machines with Intel X540-T2 (dual-port 10Gb NIC).
NIC seems to be unstable after reboot - it sporadically responses to ICMP PING requests.
ECHO REQUEST packets seems to show up, but not all of them(tcpdump).
NIC is connected to a 1Gb HP switch. Machines have PF with 'pass all' active and PFSync(master/backup CARP setup).
After 'ifconfig ix0 down' and 'ifconfig ix0 up' it starts to replay to ICMP requests, but after some time machine stops responding again. After some time NICs seems to come back again.
There is no firewall in between testing and tested systems. Same testing done from other machines on the network with same result.
Dmesg below:
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-STABLE #1: Tue May 21 21:42:21 CEST 2013
root at nfs2:/usr/obj/usr/src/sys/GENERIC amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (2000.05-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206d7 Family = 0x6 Model = 0x2d Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 68736253952 (65552 MB)
avail memory = 66171219968 (63105 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
cpu8 (AP): APIC ID: 8
cpu9 (AP): APIC ID: 9
cpu10 (AP): APIC ID: 10
cpu11 (AP): APIC ID: 11
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
Event timer "HPET7" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.9> port 0xe020-0xe03f mem 0xfb820000-0xfb83ffff,0xfb844000-0xfb847fff irq 27 at device 0.0 on pci2
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: 00:25:90:c0:16:ac
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.9> port 0xe000-0xe01f mem 0xfb800000-0xfb81ffff,0xfb840000-0xfb843fff irq 30 at device 0.1 on pci2
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: 00:25:90:c0:16:ad
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 0
igb1: Bound queue 5 to cpu 1
igb1: Bound queue 6 to cpu 2
igb1: Bound queue 7 to cpu 3
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci4: <ACPI PCI bus> on pcib3
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.7 - STABLE/9> mem 0xf9800000-0xf99fffff,0xf9a04000-0xf9a07fff irq 36 at device 0.0 on pci4
ix0: Using MSIX interrupts with 9 vectors
ix0: Ethernet address: a0:36:9f:1a:15:38
ix0: PCI Express Bus: Speed 5.0Gb/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.7 - STABLE/9> mem 0xf9600000-0xf97fffff,0xf9a00000-0xf9a03fff irq 32 at device 0.1 on pci4
ix1: Using MSIX interrupts with 9 vectors
ix1: Ethernet address: a0:36:9f:1a:15:3a
ix1: PCI Express Bus: Speed 5.0Gb/s Width x8
pcib4: <ACPI PCI-PCI bridge> irq 33 at device 2.2 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 41 at device 3.0 on pci0
pci7: <ACPI PCI bus> on pcib5
mps0: <LSI SAS2308> port 0xd000-0xd0ff mem 0xfb740000-0xfb74ffff,0xfb700000-0xfb73ffff irq 40 at device 0.0 on pci7
mps0: Firmware: 15.00.00.00, Driver: 14.00.00.01-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pci0: <base peripheral> at device 4.0 (no driver attached)
pci0: <base peripheral> at device 4.1 (no driver attached)
pci0: <base peripheral> at device 4.2 (no driver attached)
pci0: <base peripheral> at device 4.3 (no driver attached)
pci0: <base peripheral> at device 4.4 (no driver attached)
pci0: <base peripheral> at device 4.5 (no driver attached)
pci0: <base peripheral> at device 4.6 (no driver attached)
pci0: <base peripheral> at device 4.7 (no driver attached)
pci0: <base peripheral> at device 5.0 (no driver attached)
pci0: <base peripheral> at device 5.2 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci8: <ACPI PCI bus> on pcib6
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xc000-0xc0ff mem 0xf947c000-0xf947ffff,0xf9000000-0xf93fffff irq 16 at device 0.0 on pci8
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb923000-0xfb9233ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci10: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 on pci10
pci11: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 on pci11
pci12: <PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 on pci12
pci13: <PCI bus> on pcib11
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfb000000-0xfb003fff,0xfa800000-0xfaffffff irq 19 at device 0.0 on pci13
pcib12: <PCI-PCI bridge> at device 1.0 on pci11
pci14: <PCI bus> on pcib12
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb922000-0xfb9223ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci15: <ACPI PCI bus> on pcib13
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xfb921000-0xfb9217ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <dasp> at device 31.6 (no driver attached)
pcib14: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib14
pci255: <base peripheral> at device 8.0 (no driver attached)
pci255: <base peripheral> at device 8.3 (no driver attached)
pci255: <base peripheral> at device 8.4 (no driver attached)
pci255: <base peripheral> at device 9.0 (no driver attached)
pci255: <base peripheral> at device 9.3 (no driver attached)
pci255: <base peripheral> at device 9.4 (no driver attached)
pci255: <base peripheral> at device 10.0 (no driver attached)
pci255: <base peripheral> at device 10.1 (no driver attached)
pci255: <base peripheral> at device 10.2 (no driver attached)
pci255: <base peripheral> at device 10.3 (no driver attached)
pci255: <base peripheral> at device 11.0 (no driver attached)
pci255: <base peripheral> at device 11.3 (no driver attached)
pci255: <base peripheral> at device 12.0 (no driver attached)
pci255: <base peripheral> at device 12.1 (no driver attached)
pci255: <base peripheral> at device 12.2 (no driver attached)
pci255: <base peripheral> at device 12.6 (no driver attached)
pci255: <base peripheral> at device 12.7 (no driver attached)
pci255: <base peripheral> at device 13.0 (no driver attached)
pci255: <base peripheral> at device 13.1 (no driver attached)
pci255: <base peripheral> at device 13.2 (no driver attached)
pci255: <base peripheral> at device 13.6 (no driver attached)
pci255: <base peripheral> at device 14.0 (no driver attached)
pci255: <dasp> at device 14.1 (no driver attached)
pci255: <base peripheral> at device 15.0 (no driver attached)
pci255: <base peripheral> at device 15.1 (no driver attached)
pci255: <base peripheral> at device 15.2 (no driver attached)
pci255: <base peripheral> at device 15.3 (no driver attached)
pci255: <base peripheral> at device 15.4 (no driver attached)
pci255: <base peripheral> at device 15.5 (no driver attached)
pci255: <base peripheral> at device 15.6 (no driver attached)
pci255: <base peripheral> at device 16.0 (no driver attached)
pci255: <base peripheral> at device 16.1 (no driver attached)
pci255: <base peripheral> at device 16.2 (no driver attached)
pci255: <base peripheral> at device 16.3 (no driver attached)
pci255: <base peripheral> at device 16.4 (no driver attached)
pci255: <base peripheral> at device 16.5 (no driver attached)
pci255: <base peripheral> at device 16.6 (no driver attached)
pci255: <base peripheral> at device 16.7 (no driver attached)
pci255: <base peripheral> at device 17.0 (no driver attached)
pci255: <base peripheral> at device 19.0 (no driver attached)
pci255: <dasp> at device 19.1 (no driver attached)
pci255: <dasp> at device 19.4 (no driver attached)
pci255: <dasp> at device 19.5 (no driver attached)
pci255: <base peripheral> at device 19.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ses0 at mps0 bus 0 scbus0 target 20 lun 0
ses0: <LSI CORP SAS2X36 0717> Fixed Enclosure Services SCSI-5 device
ses0: 600.000MB/s transfers
ses0: Command Queueing enabled
ses0: SCSI-3 ENC Device
da3 at mps0 bus 0 scbus0 target 8 lun 0
da3: <SEAGATE ST9900805SS 0004> Fixed Direct Access SCSI-6 device
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da4 at mps0 bus 0 scbus0 target 9 lun 0
da4: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da5 at mps0 bus 0 scbus0 target 10 lun 0
da5: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da8 at mps0 bus 0 scbus0 target 13 lun 0
da8: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device
da8: 600.000MB/s transfers
da8: Command Queueing enabled
da8: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da6 at mps0 bus 0 scbus0 target 11 lun 0
da6: <SEAGATE ST9900805SS 0004> Fixed Direct Access SCSI-6 device
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da10 at mps0 bus 0 scbus0 target 15 lun 0
da10: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device
da10: 600.000MB/s transfers
da10: Command Queueing enabled
da10: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da12 at mps0 bus 0 scbus0 target 17 lun 0
da12: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device
da12: 600.000MB/s transfers
da12: Command Queueing enabled
da12: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da11 at mps0 bus 0 scbus0 target 16 lun 0
da11: <SEAGATE ST9900805SS 0004> Fixed Direct Access SCSI-6 device
da11: 600.000MB/s transfers
da11: Command Queueing enabled
da11: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da7 at mps0 bus 0 scbus0 target 12 lun 0
da7: <SEAGATE ST9900805SS 0004> Fixed Direct Access SCSI-6 device
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da9 at mps0 bus 0 scbus0 target 14 lun 0
da9: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device
da9: 600.000MB/s transfers
da9: Command Queueing enabled
da9: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C)
da13 at mps0 bus 0 scbus0 target 18 lun 0
da13: <SEAGATE ST100FM0002 0003> Fixed Direct Access SCSI-5 device
da13: 600.000MB/s transfers
da13: Command Queueing enabled
da13: 95396MB (195371568 512 byte sectors: 255H 63S/T 12161C)
da14 at mps0 bus 0 scbus0 target 19 lun 0
da14: <SEAGATE ST100FM0002 0003> Fixed Direct Access SCSI-5 device
da14: 600.000MB/s transfers
da14: Command Queueing enabled
da14: 95396MB (195371568 512 byte sectors: 255H 63S/T 12161C)
ses0: pass3,da3: Element descriptor: 'Slot 01'
ses0: pass3,da3: SAS Device Slot Element: 1 Phys at Slot 0
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c5005f32bbc6
ses0: pass4,da4: Element descriptor: 'Slot 02'
ses0: pass4,da4: SAS Device Slot Element: 1 Phys at Slot 1
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c50059ae2c56
ses0: pass5,da5: Element descriptor: 'Slot 03'
ses0: pass5,da5: SAS Device Slot Element: 1 Phys at Slot 2
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c5005a20f0de
ses0: pass6,da6: Element descriptor: 'Slot 04'
ses0: pass6,da6: SAS Device Slot Element: 1 Phys at Slot 3
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c5005f32bcbe
ses0: pass7,da7: Element descriptor: 'Slot 05'
ses0: pass7,da7: SAS Device Slot Element: 1 Phys at Slot 4
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c5005f278dce
ses0: pass8,da8: Element descriptor: 'Slot 06'
ses0: pass8,da8: SAS Device Slot Element: 1 Phys at Slot 5
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c5005a1f3cf2
ses0: pass9,da9: Element descriptor: 'Slot 07'
ses0: pass9,da9: SAS Device Slot Element: 1 Phys at Slot 6
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c5005a20e6c2
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <ATA INTEL SSDSC2CW18 400i> Fixed Direct Access SCSI-6 device
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 171705MB (351651888 512 byte sectors: 255H 63S/T 21889C)
da1 at mps0 bus 0 scbus0 target 1 lun 0
da1: <ATA INTEL SSDSC2CW06 400i> Fixed Direct Access SCSI-6 device
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 57241MB (117231408 512 byte sectors: 255H 63S/T 7297C)
da2 at mps0 bus 0 scbus0 target 2 lun 0
da2: <ATA INTEL SSDSC2CW06 400i> Fixed Direct Access SCSI-6 device
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 57241MB (117231408 512 byte sectors: 255H 63S/T 7297C)
ses0: pass10,da10: Element descriptor: 'Slot 08'
ses0: pass10,da10: SAS Device Slot Element: 1 Phys at Slot 7
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c5005a17647a
ses0: pass11,da11: Element descriptor: 'Slot 09'
ses0: pass11,da11: SAS Device Slot Element: 1 Phys at Slot 8
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c5005f3784ee
ses0: pass12,da12: Element descriptor: 'Slot 10'
ses0: pass12,da12: SAS Device Slot Element: 1 Phys at Slot 9
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c5005a20ea5a
ses0: pass13,da13: Element descriptor: 'Slot 23'
ses0: pass13,da13: SAS Device Slot Element: 1 Phys at Slot 22
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c50030105af6
ses0: pass14,da14: Element descriptor: 'Slot 24'
ses0: pass14,da14: SAS Device Slot Element: 1 Phys at Slot 23
ses0: phy 0: SAS device type 1 id 1
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50030480014028ff addr 5000c50030105b3e
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #11 Launched!
Swap zone entries reduced from 8127319 to 5418212.
Timecounter "TSC" frequency 2000045124 Hz quality 1000
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
Root mount waiting for: usbus1 usbus0
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <American Megatrends Inc.> at usbus0
ukbd0: <Keyboard Interface> on usbus0
kbd2 at ukbd0
ums0: <Mouse Interface> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
Trying to mount root from ufs:/dev/da0p2 [rw]...
igb0: link state changed to UP
lagg0: link state changed to UP
igb1: link state changed to UP
carp0: INIT -> BACKUP
ix0: link state changed to UP
carp0: link state changed to DOWN
carp0: link state changed to UP
igb1: link state changed to DOWN
igb0: link state changed to DOWN
lagg0: link state changed to DOWN
igb1: link state changed to UP
lagg0: link state changed to UP
igb0: link state changed to UP
igb1: link state changed to DOWN
igb0: link state changed to DOWN
lagg0: link state changed to DOWN
igb0: link state changed to UP
lagg0: link state changed to UP
igb1: link state changed to UP
ix1: link state changed to UP
igb0: link state changed to DOWN
igb1: link state changed to DOWN
lagg0: link state changed to DOWN
igb1: link state changed to UP
lagg0: link state changed to UP
igb0: link state changed to UP
ix1: link state changed to DOWN
igb0: link state changed to DOWN
igb1: link state changed to DOWN
lagg0: link state changed to DOWN
igb0: link state changed to UP
lagg0: link state changed to UP
igb1: link state changed to UP
ix1: link state changed to UP
igb1: link state changed to DOWN
igb0: link state changed to DOWN
lagg0: link state changed to DOWN
igb1: link state changed to UP
lagg0: link state changed to UP
igb0: link state changed to UP
igb1: link state changed to DOWN
igb0: link state changed to DOWN
lagg0: link state changed to DOWN
igb1: link state changed to UP
lagg0: link state changed to UP
igb0: link state changed to UP
igb1: link state changed to DOWN
igb0: link state changed to DOWN
lagg0: link state changed to DOWN
ix1: link state changed to DOWN
ix1: link state changed to UP
ix1: link state changed to DOWN
igb1: link state changed to UP
lagg0: link state changed to UP
igb0: link state changed to UP
ix1: link state changed to UP
carp0: MASTER -> BACKUP (more frequent advertisement received)
carp0: link state changed to DOWN
carp0: link state changed to UP
carp0: MASTER -> BACKUP (more frequent advertisement received)
carp0: link state changed to DOWN
ugen1.3: <Logitech> at usbus1
ukbd1: <Logitech HID compliant keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
kbd3 at ukbd1
uhid0: <Logitech HID compliant keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
carp0: link state changed to DOWN
carp0: INIT -> BACKUP
carp0: link state changed to DOWN
ix0: link state changed to DOWN
carp0: link state changed to DOWN
carp0: INIT -> BACKUP
ix0: link state changed to UP
carp0: link state changed to DOWN
>How-To-Repeat:
Test to reboot and PING a system with X540-T2 connected to a 1Gb switch.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list