kern/161248: [ahci] Time out, extremly slow response while copying large files
Christophe Prevotaux
c.prevotaux at rural-networks.com
Tue Feb 26 00:50:02 UTC 2013
The following reply was made to PR kern/161248; it has been noted by GNATS.
From: Christophe Prevotaux <c.prevotaux at rural-networks.com>
To: bug-followup at FreeBSD.org, kalten at gmx.at
Cc:
Subject: Re: kern/161248: [ahci] Time out, extremly slow response while
copying large files
Date: Tue, 26 Feb 2013 01:42:13 +0100
I have the same problem on FreeBSD 9.1-Release using the GENERIC Kernel:
FreeBSD xxx.xxx.xxx 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 root at farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
on a HP Pavilion 2460ef (iCore5) which is using the :
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7406000-0xf74067ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
pciconf -l:
hostb0 at pci0:0:0:0: class=0x060000 card=0x2ada103c chip=0x01508086 rev=0x09 hdr=0x00
pcib1 at pci0:0:1:0: class=0x060400 card=0x2ada103c chip=0x01518086 rev=0x09 hdr=0x01
none0 at pci0:0:22:0: class=0x078000 card=0x2ada103c chip=0x1c3a8086 rev=0x04 hdr=0x00
ehci0 at pci0:0:26:0: class=0x0c0320 card=0x2ada103c chip=0x1c2d8086 rev=0x05 hdr=0x00
hdac1 at pci0:0:27:0: class=0x040300 card=0x2ada103c chip=0x1c208086 rev=0x05 hdr=0x00
pcib2 at pci0:0:28:0: class=0x060400 card=0x2ada103c chip=0x1c108086 rev=0xb5 hdr=0x01
pcib3 at pci0:0:28:1: class=0x060400 card=0x2ada103c chip=0x1c128086 rev=0xb5 hdr=0x01
pcib4 at pci0:0:28:5: class=0x060400 card=0x2ada103c chip=0x1c1a8086 rev=0xb5 hdr=0x01
ehci1 at pci0:0:29:0: class=0x0c0320 card=0x2ada103c chip=0x1c268086 rev=0x05 hdr=0x00
isab0 at pci0:0:31:0: class=0x060100 card=0x2ada103c chip=0x1c5c8086 rev=0x05 hdr=0x00
ahci0 at pci0:0:31:2: class=0x010601 card=0x2ada103c chip=0x1c028086 rev=0x05 hdr=0x00
none1 at pci0:0:31:3: class=0x0c0500 card=0x2ada103c chip=0x1c228086 rev=0x05 hdr=0x00
vgapci0 at pci0:1:0:0: class=0x030000 card=0x90be1b0a chip=0x104910de rev=0xa1 hdr=0x00
hdac0 at pci0:1:0:1: class=0x040300 card=0x90be1b0a chip=0x0e0810de rev=0xa1 hdr=0x00
xhci0 at pci0:2:0:0: class=0x0c0330 card=0x2ada103c chip=0x8241104c rev=0x02 hdr=0x00
none2 at pci0:3:0:0: class=0x028000 card=0x18ed103c chip=0x539b1814 rev=0x00 hdr=0x00
re0 at pci0:4:0:0: class=0x020000 card=0x2ada103c chip=0x816810ec rev=0x07 hdr=0x00
Full Dmesg:
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012
root at farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Core(TM) i5-3350P CPU @ 3.10GHz (3093.05-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 6 Model = 3a Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8186257408 (7807 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM SLIC-CPC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Cuse4BSD v0.1.27 @ /dev/cuse
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-CPC> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GT 620> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
hdac0: <NVIDIA GF119 HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7408000-0xf74083ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac1: <Intel Cougar Point HDA Controller> mem 0xf7400000-0xf7403fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf7300000-0xf730ffff,0xf7310000-0xf7311fff irq 16 at device 0.0 on pci2
xhci0: 64 byte context size.
usbus1 on xhci0
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7104000-0xf7104fff,0xf7100000-0xf7103fff irq 16 at device 0.0 on pci4
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 10:60:4b:72:0d:1e
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7407000-0xf74073ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7406000-0xf74067ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <IDT 92HD73E1 HDA CODEC> at cad 0 on hdac1
hdaa1: <IDT 92HD73E1 Audio Function Group> at nid 1 on hdacc1
pcm2: <IDT 92HD73E1 (Analog 7.1+HP/2.0)> at nid 12,16,15,17,10 and 11,14 on hdaa1
pcm3: <IDT 92HD73E1 (Rear Analog Line-in)> at nid 13 on hdaa1
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x104c> at usbus1
uhub1: <0x104c XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 4 ports with 4 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen1.2: <SanDisk> at usbus1
umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.26, addr 1> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:3:0:-1: Attached to scbus3
uhub3: 4 ports with 4 removable, self powered
uhub4: 6 ports with 6 removable, self powered
ugen0.3: <Logitech> at usbus0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen2.3: <Generic> at usbus2
umass1: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass1: SCSI over Bulk-Only; quirks = 0x4001
umass1:4:1:-1: Attached to scbus4
ugen0.4: <NOVATEK> at usbus0
ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 4> on usbus0
kbd2 at ukbd0
uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 4> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-9YN162 HP16> ATA-8 SATA 3.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <SanDisk Cruzer Fit 1.26> Removable Direct Access SCSI-5 device
da0: 40.000MB/s transfers
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <hp CDDVDW SH-216BB HE40> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0: 15267MB (31266816 512 byte sectors: 255H 63S/T 1946C)
da1 at umass-sim1 bus 1 scbus4 target 0 lun 0
da1: <Multiple Card Reader 1.00> Removable Direct Access SCSI-0 device
SMP: AP CPU #2 Launched!
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 12082217 Hz quality 1000
Root mount waiting for: usbus0
ugen0.5: <Ralink> at usbus0
run0: <1.0> on usbus0
run0: MAC/BBP RT3070 (rev 0x0200), RF RT3020 (MIMO 1T1R), address 00:22:cf:04:14:45
Trying to mount root from ufs:/dev/ada0s1a [rw]...
wlan0: Ethernet address: 00:22:cf:04:14:45
run0: firmware RT2870 ver. 0.236 loaded
NVRM: GPU at 0000:01:00: GPU-8e555549-dce3-45a1-6905-3017127318b4
--
=====================================================
Christophe Prevotaux
=====================================================
More information about the freebsd-bugs
mailing list