kern/164189 [pccard]

Mon Jan 16 05:00:31 UTC 2012

The following reply was made to PR kern/164189; it has been noted by GNATS.

From: Zach Metzinger <zmetzing at pobox.com>
To: bug-followup at freebsd.org
Cc:  
Subject: Re: kern/164189 [pccard]
Date: Sun, 15 Jan 2012 22:42:23 -0600

 --aM3YZ0Iwxop3KEKx
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline

 Attached, find additional system information.

 --- Zach

 --aM3YZ0Iwxop3KEKx
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename="devinfo.txt"

 nexus0
   npx0
   ram0
   legacy0
     cpu0
     pcib0
       pci0
         hostb0 pnpinfo vendor=0x1179 device=0x0601 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=0 function=0
         cbb0 pnpinfo vendor=0x1179 device=0x060a subvendor=0x0000 subdevice=0x0000 class=0x060700 at slot=2 function=0
           cardbus0
           pccard0
         cbb1 pnpinfo vendor=0x1179 device=0x060a subvendor=0x0000 subdevice=0x0000 class=0x060700 at slot=2 function=1
           cardbus1
           pccard1
         vgapci0 pnpinfo vendor=0x102c device=0x00e4 subvendor=0x0000 subdevice=0x0000 class=0x030000 at slot=4 function=0
           drm0
         ohci0 pnpinfo vendor=0x1033 device=0x0035 subvendor=0x0000 subdevice=0x0000 class=0x0c0310 at slot=11 function=0
           usbus0
             uhub0
               umass0 pnpinfo vendor=0x0951 product=0x1605 devclass=0x00 devsubclass=0x00 sernum="5B83170009EB" release=0x0110 mode=host intclass=0x08 intsub at bus=1 hubaddr=1 port=0 devaddr=2 interface=0
     pir0
     eisa0
     isa0
       unknown pnpinfo pnpid=PNP0c01
       atdma0 pnpinfo pnpid=PNP0200
       attimer0 pnpinfo pnpid=PNP0100
       unknown pnpinfo pnpid=PNP0800
       npxisa0 pnpinfo pnpid=PNP0c04
       atkbdc0 pnpinfo pnpid=PNP0303
         atkbd0
         psm0
       unknown pnpinfo pnpid=TOS7400
       atrtc0 pnpinfo pnpid=PNP0b00
       sysresource0 pnpinfo pnpid=PNP0c02
       fdc0 pnpinfo pnpid=PNP0700
         fd0
         fd1
       ata0 pnpinfo pnpid=PNP0600
       ata1 pnpinfo pnpid=PNP0600
       uart0 pnpinfo pnpid=PNP0501
       ppc0 pnpinfo pnpid=PNP0401
         ppbus0
           plip0
           lpt0
           ppi0
       pcibus_pnp0 pnpinfo pnpid=PNP0a03
       unknown pnpinfo pnpid=TOS700d
       unknown pnpinfo pnpid=TOS7009
       unknown pnpinfo pnpid=YMH0021
       pmtimer0
       sc0
       vga0
       sbc0
         pcm0
         midi0
         midi1
       uart1

 --aM3YZ0Iwxop3KEKx
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename="dmesg.short.txt"

 Copyright (c) 1992-2012 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 9.0-RELEASE #0: Sun Jan 15 12:57:22 CST 2012
     root at wraith:/usr/src/sys/i386/compile/CLUNKER i386
 CPU: Pentium/P55C (132.64-MHz 586-class CPU)
   Origin = "GenuineIntel"  Id = 0x543  Family = 5  Model = 4  Stepping = 3
   Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
 real memory  = 84017152 (80 MB)
 avail memory = 63082496 (60 MB)
 Intel Pentium detected, installing workaround for F00F bug
 kbd1 at kbdmux0
 pcib0: <Host to PCI bridge> pcibus 0 on motherboard
 pir0: <PCI Interrupt Routing Table: 3 Entries> on motherboard
 pci0: <PCI bus> on pcib0
 cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.0 on pci0
 cbb0: Found memory at 80000000
 cbb0: Secondary bus is 20
 cardbus0: <CardBus bus> on cbb0
 pccard0: <16-bit PCCard bus> on cbb0
 cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.1 on pci0
 cbb1: Found memory at 80001000
 cbb1: Secondary bus is 21
 cardbus1: <CardBus bus> on cbb1
 pccard1: <16-bit PCCard bus> on cbb1
 vgapci0: <VGA-compatible display> mem 0xfe000000-0xfeffffff at device 4.0 on pci0
 ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0
 usbus0: <NEC uPD 9210 USB controller> on ohci0
 cpu0 on motherboard
 isa0: <ISA bus> on motherboard
 pmtimer0 on isa0
 unknown: <PNP0c01> can't assign resources (memory)
 attimer0: <AT timer> at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Event timer "i8254" frequency 1193182 Hz quality 100
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
 Event timer "RTC" frequency 32768 Hz quality 0
 fdc0: <NEC 765 or clone> at port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 pnpid PNP0700 on isa0
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 ata0: <Generic ESDI/IDE/ATA controller> at port 0x1f0-0x1f7,0x3f6 irq 14 pnpid PNP0600 on isa0
 ata1: <Generic ESDI/IDE/ATA controller> at port 0x170-0x177,0x376-0x377 irq 15 pnpid PNP0600 on isa0
 uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0
 ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 7 drq 3 pnpid PNP0401 on isa0
 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/16 bytes threshold
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 sbc0: <SoundBlaster Pro> at port 0x220-0x22f irq 5 drq 0 on isa0
 sbc0: [GIANT-LOCKED]
 pcm0: <SB DSP 3.01> on sbc0
 pcm0: [GIANT-LOCKED]
 uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0
 unknown: <PNP0c01> can't assign resources (memory)
 unknown: <TOS700d> can't assign resources (port)
 unknown: <YMH0021> can't assign resources (port)
 Timecounters tick every 1.000 msec
 Status is 0x30000006
 Status is 0x30000006
 usbus0: 12Mbps Full Speed USB v1.0
 ugen0.1: <NEC> at usbus0
 uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ada0 at ata0 bus 0 scbus0 target 0 lun 0
 ada0: <ST91430AG 21.21.03> ATA-3 device
 ada0: 16.700MB/s transfers (PIO4, PIO 8192bytes)
 ada0: 1382MB (2830464 512 byte sectors: 16H 63S/T 2808C)
 ada0: Previously was known as ad0
 cd0 at ata1 bus 0 scbus1 target 0 lun 0
 cd0: <TOSHIBA CD-ROM XM-1502BN 1001> Removable CD-ROM SCSI-0 device 
 cd0: 11.100MB/s transfers (PIO3, ATAPI 12bytes, PIO 65534bytes)
 cd0: Attempt to query device size failed: NOT READY, Medium not present
 Timecounter "TSC" frequency 132635048 Hz quality 800
 uhub0: 2 ports with 2 removable, self powered
 ugen0.2: <Kingston> at usbus0
 umass0: <Kingston DataTravelerMini, class 0/0, rev 2.00/1.10, addr 2> on usbus0
 umass0:  SCSI over Bulk-Only; quirks = 0x4100
 umass0:2:0:-1: Attached to scbus2
 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
 da0: <Kingston DataTravelerMini PMAP> Removable Direct Access SCSI-0 device 
 da0: 1.000MB/s transfers
 da0: 1912MB (3915776 512 byte sectors: 255H 63S/T 243C)
 Trying to mount root from ufs:/dev/ada0s1a [rw]...
 Status is 0x30000410
 cbb1: card inserted: event=0x00000000, state=30000410
 pccard1: chip_socket_enable
 cbb_pcic_socket_enable:
 cbb1: cbb_power: 5V
 pccard1: read_cis
 CIS is too long -- truncating
 pccard1: check_cis_quirks
 pccard1: Card has no functions!
 cbb1: PC Card card activation failed
 Status is 0x30000416
 cbb_pcic_socket_disable
 cbb1: cbb_power: 0V
 Status is 0x30000410
 cbb1: card inserted: event=0x00000000, state=30000410
 pccard1: chip_socket_enable
 cbb_pcic_socket_enable:
 cbb1: cbb_power: 5V
 pccard1: read_cis
 CIS is too long -- truncating
 pccard1: check_cis_quirks
 pccard1: Card has no functions!
 cbb1: PC Card card activation failed
 Status is 0x30000416
 cbb_pcic_socket_disable
 cbb1: cbb_power: 0V
 Status is 0x30000410
 cbb1: card inserted: event=0x00000000, state=30000410
 pccard1: chip_socket_enable
 cbb_pcic_socket_enable:
 cbb1: cbb_power: 5V
 pccard1: read_cis
 CIS is too long -- truncating
 pccard1: check_cis_quirks
 pccard1: Card has no functions!
 cbb1: PC Card card activation failed
 Status is 0x30000416
 cbb_pcic_socket_disable
 cbb1: cbb_power: 0V
 Status is 0x30000410
 cbb1: card inserted: event=0x00000000, state=30000410
 pccard1: chip_socket_enable
 cbb_pcic_socket_enable:
 cbb1: cbb_power: 5V
 pccard1: read_cis
 CIS is too long -- truncating
 pccard1: check_cis_quirks
 pccard1: Card has no functions!
 cbb1: PC Card card activation failed
 Status is 0x30000416
 cbb_pcic_socket_disable
 cbb1: cbb_power: 0V

 --aM3YZ0Iwxop3KEKx
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename="pciconf.txt"

 hostb0 at pci0:0:0:0:	class=0x060000 card=0x00000000 chip=0x06011179 rev=0x27 hdr=0x00
     vendor     = 'Toshiba America Info Systems'
     device     = 'CPU to PCI bridge'
     class      = bridge
     subclass   = HOST-PCI
 cbb0 at pci0:0:2:0:	class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
     vendor     = 'Toshiba America Info Systems'
     device     = 'ToPIC95'
     class      = bridge
     subclass   = PCI-CardBus
 cbb1 at pci0:0:2:1:	class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
     vendor     = 'Toshiba America Info Systems'
     device     = 'ToPIC95'
     class      = bridge
     subclass   = PCI-CardBus
 vgapci0 at pci0:0:4:0:	class=0x030000 card=0x00000000 chip=0x00e4102c rev=0xc2 hdr=0x00
     vendor     = 'Chips and Technologies'
     device     = 'F65554'
     class      = display
     subclass   = VGA
 ohci0 at pci0:0:11:0:	class=0x0c0310 card=0x00000000 chip=0x00351033 rev=0x01 hdr=0x00
     vendor     = 'NEC Corporation'
     device     = 'USB'
     class      = serial bus
     subclass   = USB

 --aM3YZ0Iwxop3KEKx--