kern/154433: run_interrupt_driven_hooks: still waiting after 60-300
seconds for xpt_config
Robert Nagy
robert at bsd.hu
Tue Feb 1 11:30:12 UTC 2011
>Number: 154433
>Category: kern
>Synopsis: run_interrupt_driven_hooks: still waiting after 60-300 seconds for xpt_config
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Feb 01 11:30:11 UTC 2011
>Closed-Date:
>Last-Modified:
>Originator: Charlie &
>Release: FreeBSD 8.2-PRERELEASE amd64
>Organization:
>Environment:
System: FreeBSD siva.hu 8.2-PRERELEASE FreeBSD 8.2-PRERELEASE #4: Tue Feb 1 10:49:21 CET 2011 root at siva.hu:/usr/obj/usr/src/sys/GENERIC amd64
There is a 900 second wait loop in the kernel while booting.
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 180 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 240 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 300 seconds for xpt_config
---
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-PRERELEASE #4: Tue Feb 1 10:49:21 CET 2011
root at siva.hu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz (2341.48-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 17179869184 (16384 MB)
avail memory = 16534269952 (15768 MB)
ACPI APIC Table: <INTEL S5000VSA>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000VSA> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
isp0: <Qlogic ISP 2532 PCI FC-AL Adapter> port 0x4400-0x44ff mem 0xf8a00000-0xf8a03fff irq 16 at device 0.0 on pci3
isp0: [ITHREAD]
isp1: <Qlogic ISP 2532 PCI FC-AL Adapter> port 0x4000-0x40ff mem 0xf8a04000-0xf8a07fff irq 17 at device 0.1 on pci3
isp1: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
mfi0: <LSI MegaSAS 1078> port 0x3000-0x30ff mem 0xf8900000-0xf893ffff,0xf8940000-0xf897ffff irq 17 at device 0.0 on pci4
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 6722 (349874230s/0x0020/info) - Shutdown command received from host
mfi0: 6723 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1010/8086)
mfi0: 6724 (boot + 3s/0x0020/info) - Firmware version 1.10.02-0180
mfi0: 6725 (boot + 4s/0x0008/info) - Battery temperature is normal
mfi0: 6726 (boot + 4s/0x0008/info) - Battery Present
mfi0: 6727 (boot + 10s/0x0002/info) - Inserted: PD 08(e0/s8)
mfi0: 6728 (boot + 10s/0x0002/info) - Inserted: PD 08(e0/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=0a241a02538e6c3d,0000000000000000
mfi0: 6729 (boot + 10s/0x0002/info) - Inserted: PD 09(e0/s9)
mfi0: 6730 (boot + 10s/0x0002/info) - Inserted: PD 09(e0/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=0a241a0253747235,0000000000000000
mfi0: 6731 (boot + 10s/0x0002/info) - Inserted: PD 0a(e0/s10)
mfi0: 6732 (boot + 10s/0x0002/info) - Inserted: PD 0a(e0/s10) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=0a241a0253736839,0000000000000000
mfi0: 6733 (boot + 10s/0x0042/info) - Global Hot Spare created on PD 08(e0/s8) (global)
mfi0: 6734 (boot + 10s/0x0002/info) - State change on PD 08(e0/s8) from UNCONFIGURED_GOOD(0) to HOT SPARE(2)
mfi0: 6735 (349874276s/0x0020/info) - Time established as 02/01/11 11:17:56; (42 seconds since power on)
mfi0: 6736 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1010/8086)
mfi0: 6737 (boot + 3s/0x0020/info) - Firmware version 1.10.02-0180
mfi0: 6738 (boot + 4s/0x0008/info) - Battery temperature is normal
mfi0: 6739 (boot + 4s/0x0008/info) - Battery Present
mfi0: 6740 (boot + 10s/0x0002/info) - Inserted: PD 08(e0/s8)
mfi0: 6741 (boot + 10s/0x0002/info) - Inserted: PD 08(e0/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=0a241a02538e6c3d,0000000000000000
mfi0: 6742 (boot + 10s/0x0002/info) - Inserted: PD 09(e0/s9)
mfi0: 6743 (boot + 10s/0x0002/info) - Inserted: PD 09(e0/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=0a241a0253747235,0000000000000000
mfi0: 6744 (boot + 10s/0x0002/info) - Inserted: PD 0a(e0/s10)
mfi0: 6745 (boot + 10s/0x0002/info) - Inserted: PD 0a(e0/s10) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=0a241a0253736839,0000000000000000
mfi0: 6746 (boot + 10s/0x0042/info) - Global Hot Spare created on PD 08(e0/s8) (global)
mfi0: 6747 (boot + 10s/0x0002/info) - State change on PD 08(e0/s8) from UNCONFIGURED_GOOD(0) to HOT SPARE(2)
mfi0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0x2020-0x203f mem 0xf8820000-0xf883ffff,0xf8400000-0xf87fffff irq 18 at device 0.0 on pci5
em0: Using an MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:52:dd:48
em1: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0x2000-0x201f mem 0xf8800000-0xf881ffff,0xf8000000-0xf83fffff irq 19 at device 0.1 on pci5
em1: Using an MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:52:dd:49
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib8
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x5080-0x509f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x5060-0x507f irq 22 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x5040-0x505f irq 23 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x5020-0x503f irq 22 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf8d00400-0xf8d007ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib9
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xf0000000-0xf7ffffff,0xf8c00000-0xf8c0ffff irq 17 at device 12.0 on pci9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x50b0-0x50bf irq 20 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x50c8-0x50cf,0x50e4-0x50e7,0x50c0-0x50c7,0x50e0-0x50e3,0x50a0-0x50af mem 0xf8d00000-0xf8d003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xd1000-0xd1fff,0xd2000-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
RTC BIOS diagnostic error 5<invalid_time>
Timecounters tick every 1.000 msec
mfi0: 6748 (349874359s/0x0020/info) - Time established as 02/01/11 11:19:19; (42 seconds since power on)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
mfid0: <MFI Logical Disk> on mfi0
mfid0: 237464MB (486326272 sectors) RAID volume '' is optimal
uhub4: 8 ports with 8 removable, self powered
ugen0.2: <Peppercon AG> at usbus0
umass0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x0000
ugen2.2: <TEAC> at usbus2
umass1: <TEAC TEAC FD-05PUW, class 0/0, rev 2.00/0.00, addr 2> on usbus2
umass1: UFI over CBI; quirks = 0x0000
umass0:2:0:-1: Attached to scbus2
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
umass1:3:1:-1: Attached to scbus3
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 180 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 240 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 300 seconds for xpt_config
ses0 at isp0 bus 0 scbus0 target 0 lun 5
ses0: <IFT S24F-R1840-4 373O> Fixed Enclosure Services SCSI-4 device
ses0: 400.000MB/s transfers WWNN 0x200000d02307bed9 WWPN 0x210000d02307bed9 PortID 0x10025
ses0: Command Queueing enabled
ses0: SCSI-3 SES Device
ses1 at isp1 bus 0 scbus1 target 0 lun 0
ses1: <IFT S24F-R1840-4 373O> Fixed Enclosure Services SCSI-4 device
ses1: 400.000MB/s transfers WWNN 0x200000d02317bed9 WWPN 0x210000d02317bed9 PortID 0x10023
ses1: Command Queueing enabled
ses1: SCSI-3 SES Device
da0 at isp0 bus 0 scbus0 target 0 lun 0
da0: <IFT S24F-R1840-4 373O> Fixed Direct Access SCSI-4 device
da0: 400.000MB/s transfers WWNN 0x200000d02307bed9 WWPN 0x210000d02307bed9 PortID 0x10025
da0: Command Queueing enabled
da0: 953609MB (1952991232 512 byte sectors: 255H 63S/T 121568C)
da1 at isp0 bus 0 scbus0 target 0 lun 1
da1: <IFT S24F-R1840-4 373O> Fixed Direct Access SCSI-4 device
da1: 400.000MB/s transfers WWNN 0x200000d02307bed9 WWPN 0x210000d02307bed9 PortID 0x10025
da1: Command Queueing enabled
da1: 15360MB (31457280 512 byte sectors: 255H 63S/T 1958C)
da2 at isp0 bus 0 scbus0 target 0 lun 2
da2: <IFT S24F-R1840-4 373O> Fixed Direct Access SCSI-4 device
da2: 400.000MB/s transfers WWNN 0x200000d02307bed9 WWPN 0x210000d02307bed9 PortID 0x10025
da2: Command Queueing enabled
da2: 15360MB (31457280 512 byte sectors: 255H 63S/T 1958C)
da3 at isp0 bus 0 scbus0 target 0 lun 3
da3: <IFT S24F-R1840-4 373O> Fixed Direct Access SCSI-4 device
da3: 400.000MB/s transfers WWNN 0x200000d02307bed9 WWPN 0x210000d02307bed9 PortID 0x10025
da3: Command Queueing enabled
da3: 199135MB (407828480 512 byte sectors: 255H 63S/T 25386C)
da4 at isp0 bus 0 scbus0 target 0 lun 4
da4: <IFT S24F-R1840-4 373O> Fixed Direct Access SCSI-4 device
da4: 400.000MB/s transfers WWNN 0x200000d02307bed9 WWPN 0x210000d02307bed9 PortID 0x10025
da4: Command Queueing enabled
da4: 199136MB (407830528 512 byte sectors: 255H 63S/T 25386C)
lapic7: Forcing LINT1 to edge trigger
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd0: <PepperC Virtual Disc 1 0.01> Removable CD-ROM SCSI-3 device
cd0: 1.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not presentSMP: AP CPU #7 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
da5 at umass-sim1 bus 1 scbus3 target 0 lun 0
da5: <TEAC FD-05PUW 3000> Removable Direct Access SCSI-0 device
da5: 1.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
GEOM: da0: partition 3 does not start on a track boundary.
GEOM: da0: partition 3 does not end on a track boundary.
GEOM: da0: partition 2 does not start on a track boundary.
GEOM: da0: partition 2 does not end on a track boundary.
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
Trying to mount root from ufs:/dev/mfid0s1a
em0: link state changed to UP
>Description:
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list