kern/151447: [ata] FAILURE - READ_DMA48 timed out LBA=3907029167
Darren Reed
darernr at freebsd.org
Fri Oct 15 06:40:10 UTC 2010
The following reply was made to PR kern/151447; it has been noted by GNATS.
From: Darren Reed <darernr at freebsd.org>
To: bug-followup at FreeBSD.org, darrenr at FreeBSD.org
Cc:
Subject: Re: kern/151447: [ata] FAILURE - READ_DMA48 timed out LBA=3907029167
Date: Thu, 14 Oct 2010 23:18:05 +0000
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA4 #0: Sun Sep 6 05:51:03 UTC 2009
root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
<mailto:root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC>
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2667.97-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
Features=0xfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
Features2=0x80982201<SSE3,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,<b31>>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 1073741824 (1024 MB)
avail memory = 1031798784 (984 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL 440BX> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0x10c0-0x10cf at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <bridge> at device 7.3 (no driver attached)
pci0: <base peripheral> at device 7.7 (no driver attached)
vgapci0: <VGA-compatible display> port 0x10d0-0x10df mem
0xd0000000-0xd7ffffff,0
xd8000000-0xd87fffff irq 16 at device 15.0 on pci0
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem
0xd8820000-0xd883fff
f,0xd8800000-0xd881ffff irq 17 at device 16.0 on pci0
mpt0: [ITHREAD]
mpt0: MPI Version=1.2.0.0
pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x20c0-0x20df irq
18 at de
vice 0.0 on pci2
uhci0: [ITHREAD]
usbus0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2000-0x203f
mem 0xd894
0000-0xd895ffff,0xd8900000-0xd890ffff irq 19 at device 1.0 on pci2
em0: Memory Access and/or Bus Master bits were not set!
em0: [FILTER]
em0: Ethernet address: 00:0c:29:2d:fc:09
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd8930000-0xd8930fff irq
16 at d
evice 2.0 on pci2
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2040-0x207f
mem 0xd896
0000-0xd897ffff,0xd8910000-0xd891ffff irq 18 at device 4.0 on pci2
em1: Memory Access and/or Bus Master bits were not set!
em1: [FILTER]
em1: Ethernet address: 00:0c:29:2d:fc:13
em2: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2080-0x20bf
mem 0xd898
0000-0xd899ffff,0xd8920000-0xd892ffff irq 19 at device 5.0 on pci2
em2: Memory Access and/or Bus Master bits were not set!
em2: [FILTER]
em2: Ethernet address: 00:0c:29:2d:fc:1d
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0
pci12: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0
pci13: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0
pci14: <ACPI PCI bus> on pcib14
pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0
pci15: <ACPI PCI bus> on pcib15
pcib16: <ACPI PCI-PCI bridge> at device 22.5 on pci0
pci16: <ACPI PCI bus> on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 22.6 on pci0
pci17: <ACPI PCI bus> on pcib17
pcib18: <ACPI PCI-PCI bridge> at device 22.7 on pci0
pci18: <ACPI PCI bus> on pcib18
pcib19: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci19: <ACPI PCI bus> on pcib19
pcib20: <ACPI PCI-PCI bridge> at device 23.1 on pci0
pci20: <ACPI PCI bus> on pcib20
pcib21: <ACPI PCI-PCI bridge> at device 23.2 on pci0
pci21: <ACPI PCI bus> on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 23.3 on pci0
pci22: <ACPI PCI bus> on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 23.4 on pci0
pci23: <ACPI PCI bus> on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 23.5 on pci0
pci24: <ACPI PCI bus> on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 23.6 on pci0
pci25: <ACPI PCI bus> on pcib25
pcib26: <ACPI PCI-PCI bridge> at device 23.7 on pci0
pci26: <ACPI PCI bus> on pcib26
pcib27: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci27: <ACPI PCI bus> on pcib27
pcib28: <ACPI PCI-PCI bridge> at device 24.1 on pci0
pci28: <ACPI PCI bus> on pcib28
pcib29: <ACPI PCI-PCI bridge> at device 24.2 on pci0
pci29: <ACPI PCI bus> on pcib29
pcib30: <ACPI PCI-PCI bridge> at device 24.3 on pci0
pci30: <ACPI PCI bus> on pcib30
pcib31: <ACPI PCI-PCI bridge> at device 24.4 on pci0
pci31: <ACPI PCI bus> on pcib31
pcib32: <ACPI PCI-PCI bridge> at device 24.5 on pci0
pci32: <ACPI PCI bus> on pcib32
pcib33: <ACPI PCI-PCI bridge> at device 24.6 on pci0
pci33: <ACPI PCI bus> on pcib33
pcib34: <ACPI PCI-PCI bridge> at device 24.7 on pci0
pci34: <ACPI PCI bus> on pcib34
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
smist0: <SpeedStep SMI> on cpu0
device_attach: smist0 attach returned 6
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
smist1: <SpeedStep SMI> on cpu1
device_attach: smist1 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff
,0xca000-0xcafff,0xdc000-0xdffff,0xe4000-0xe7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ad0: 610480MB <VMware Virtual IDE Hard Drive 00000001> at ata0-master UDMA33
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <(0x15ad)> at usbus1
uhub1: <(0x15ad) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
GEOM: ad0: partition 3 does not start on a track boundary.
GEOM: ad0: partition 3 does not end on a track boundary.
GEOM: ad0: partition 2 does not start on a track boundary.
GEOM: ad0: partition 2 does not end on a track boundary.
ad1: 1907729MB <VMware Virtual IDE Hard Drive 00000001> at ata0-slave UDMA33
uhub0: 2 ports with 2 removable, self powered
fdc0: ready for output in input
fdc0: ready for output in input
fdc0: ready for output in input
fdc0: ready for output in input
fdc0: ready for output in input
fdc0: ready for output in input
fdc0: ready for output in input
fdc0: ready for output in input
uhub1: 6 ports with 6 removable, self powered
ad1: FAILURE - READ_DMA48 timed out LBA=3907029165
ad1: FAILURE - READ_DMA48 timed out LBA=3907029151
ad1: FAILURE - READ_DMA48 timed out LBA=3907029164
ad1: FAILURE - READ_DMA48 timed out LBA=3907029167
ad1: FAILURE - READ_DMA48 timed out LBA=3907029167
ad1: FAILURE - READ_DMA48 timed out LBA=3907028727
acd0: CDROM <VMware Virtual IDE CDROM Drive/00000001> at ata1-master UDMA33
Waiting 5 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: ad0s4: geometry does not match label (255h,63s != 15h,63s).
ad1: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=3907029167
ad1: TIMEOUT - READ_DMA48 retrying (0 retries left) LBA=3907029167
ad1: FAILURE - READ_DMA48 timed out LBA=3907029167
GEOM: ad1: invalid disklabel.
Trying to mount root from ufs:/dev/ad0s4a
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS NOTICE: prefetch is disabled by default on i386 - add enable to
tunable to c
hange.
ZFS filesystem version 13
ZFS storage pool version 13
pid 871 (ps), uid 0: exited on signal 11 (core dumped)
pid 888 (fstat), uid 0: exited on signal 11
More information about the freebsd-bugs
mailing list