misc/151226: can't delete zfs snapshot
paranormal
akabsd at yandex.ru
Tue Oct 5 12:30:07 UTC 2010
>Number: 151226
>Category: misc
>Synopsis: can't delete zfs snapshot
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Oct 05 12:30:06 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: paranormal
>Release: 8.1-RELEASE
>Organization:
redtram
>Environment:
FreeBSD eva02 8.1-RELEASE FreeBSD 8.1-RELEASE #0 r212748: Mon Sep 20 11:47:02 EEST 2010 root at eva02:/usr/obj/usr/src/sys/EVA02 amd64
>Description:
I'm use port sysutils/zfs-snapshot-mgmt.
and this port make many zfs snapshots for checked file systems.
eva02$ zfs list -t snapshot
NAME USED AVAIL REFER MOUNTPOINT
zroot/home at auto-2010-10-03_06.50 616K - 124G -
zroot/home at auto-2010-10-03_07.00 616K - 124G -
zroot/usr at auto-2010-10-02_23.00 250M - 7,91G -
zroot/var at auto-2010-10-02_23.00 49,2M - 572M -
Yesterday, my laptop after 10-15 min work, doesn't work with fs. Gnome scary me, and other programs not write to hd.
Experimentally found problem, this is are
zfs destroy zroot/home at auto-2010-10-03_06.50
This command never by done, and lock fs. Kill and kill -9 not work.
Shutdown too not work, this write:
some process couldn't die, ps axl advised
and nothing.
zpool scrub not helpful, and hdd check built ibm/lenovo bios utility work fine.
Maybe you need other info?
>How-To-Repeat:
>Fix:
Comment all in /usr/local/etc/zfs-snapshot-mgmt.conf due home. :(
And not call for current snapshot.
Patch attached with submission follows:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0 r212748: Mon Sep 20 11:47:02 EEST 2010
root at eva02:/usr/obj/usr/src/sys/EVA02 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz (2593.52-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4021456896 (3835 MB)
ACPI APIC Table: <LENOVO TP-7L >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100331/tbfadt-625)
ACPI Warning: Optional field Gpe1Block has zero address or length: 0x 0 102C/0x0 (20100331/tbfadt-655)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-7L> on motherboard
CPU0: local APIC error 0x40
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xd2000000-0xd2ffffff,0xe0000000-0xefffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1
acpi_video0: <ACPI video extension> on vgapci0
nvidia0: <Quadro NVS 140M> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x1840-0x185f mem 0xfe200000-0xfe21ffff,0xfe225000-0xfe225fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1e:37:d4:d1:92
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f irq 20 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfe226c00-0xfe226fff irq 22 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem 0xfe220000-0xfe223fff irq 17 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <memory> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
ath0: <Atheros 5212> mem 0xd7df0000-0xd7dfffff irq 17 at device 0.0 on pci3
ath0: [ITHREAD]
ath0: AR5413 mac 10.3 RF5424 phy 6.1
pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib6
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0
uhci2: [ITHREAD]
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df irq 17 at device 29.1 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe227000-0xfe2273ff irq 19 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib7
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf8100000-0xf8100fff irq 16 at device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
fwohci0: <1394 Open Host Controller Interface> mem 0xf8101000-0xf81017ff irq 17 at device 0.1 on pci21
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:03:2a:28:f5:aa
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x2554000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:06:1b:28:f5:aa
fwe0: Ethernet address: 02:06:1b:28:f5:aa
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:06:1b:03:2a:28:f5:aa @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci21: <base peripheral, SD host controller> at device 0.2 (no driver attached)
pci21: <base peripheral> at device 0.3 (no driver attached)
pci21: <base peripheral> at device 0.4 (no driver attached)
pci21: <base peripheral> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1830-0x183f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH8M SATA300 controller> port 0x1c48-0x1c4f,0x1c1c-0x1c1f,0x1c40-0x1c47,0x1c18-0x1c1b,0x1c20-0x1c3f mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 3 1.5Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 2> on atapci1
ata3: [ITHREAD]
ichsmb0: <Intel 82801H (ICH8) SMBus controller> port 0x1c60-0x1c7f mem 0xfe227400-0xfe2274ff irq 23 at device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd3fff,0xe0000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 3
ZFS storage pool version 14
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-M10N/1.02> at ata0-master UDMA33
ad4: 190782MB <HITACHI HTS722020K9SA00 FDE DC4LC75A> at ata2-master UDMA100 SATA 1.5Gb/s
hdac0: HDA Codec #0: Analog Devices AD1984
hdac0: HDA Codec #1: Conexant (Unknown)
pcm0: <HDA Analog Devices AD1984 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Analog Devices AD1984 PCM #1 Digital> at cad 0 nid 1 on hdac0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): CAM status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI status: Check Condition
(probe0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-M10N 1.02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from zfs:zroot
ugen3.2: <Logitech> at usbus3
ums0: <Logitech G9 Laser Mouse, class 0/0, rev 2.00/50.00, addr 2> on usbus3
ums0: 16 buttons and [XYZT] coordinates ID=0
ukbd0: <Logitech G9 Laser Mouse, class 0/0, rev 2.00/50.00, addr 2> on usbus3
kbd2 at ukbd0
ukbd_set_leds_callback: error=USB_ERR_STALLED
GEOM_ELI: Device gpt/swap0.eli created.
GEOM_ELI: Encryption: Blowfish-CBC 128
GEOM_ELI: Crypto: software
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list