conf/151169: Installation of FBSD 8.0 has cleared the MAC ether to
00:00:00:00:00:00
Helmut Schellong
var at schellong.biz
Sun Oct 3 08:10:02 UTC 2010
>Number: 151169
>Category: conf
>Synopsis: Installation of FBSD 8.0 has cleared the MAC ether to 00:00:00:00:00:00
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Oct 03 08:10:02 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: Helmut Schellong
>Release: FreeBSD 8.0-RELEASE
>Organization:
>Environment:
FreeBSD fbsd.lokal.biz 8.0-RELEASE FreeBSD 8.0-RELEASE #1: Sun Jan 3 00:04:05 CET 2010 root at fbsd.lokal.biz:/usr/src/sys/i386/compile/BSD80PAE i386
>Description:
While the Installation of FBSD 8.0 the MAC of msk0
was covered cleared to 00:00:00:00:00:00.
Before the installation this value was guaranteed not 0!
I had used the interface msk0 successfully since 2006!
104] ifconfig
msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4>
ether 00:00:00:00:00:00
media: Ethernet autoselect
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether 00:17:31:69:a0:77
inet 192.168.64.103 netmask 0xffffff00 broadcast 192.168.64.255
media: Ethernet autoselect (1000baseT <full-duplex,flag0,flag1>)
status: active
Since this event the interface msk0 is not usable.
I was not able to set this value permanently to a value >0.
Fortunately the Asus board P5B deluxe has TWO marvell interfaces!
dmesg.boot:
-----------
mskc0: <Marvell Yukon 88E8055 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfbefc000-0xfbefffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x02> on mskc0
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mskc0: [FILTER]
skc0: <Marvell Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbff4000-0xfbff7fff irq 19 at device 4.0 on pci4
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:17:31:69:a0:77
miibus1: <MII bus> on sk0
e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
skc0: [ITHREAD]
>How-To-Repeat:
Not repeatable.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list