kern/148979: [iwn][panic] Intel 5100agn cause panic on 8.1-STABLE amd64 in TOSHIBA M800 laptop

Neko Chang epopen at gmail.com
Tue Jul 27 03:20:06 UTC 2010


>Number:         148979
>Category:       kern
>Synopsis:       [iwn][panic] Intel 5100agn cause panic on 8.1-STABLE amd64 in TOSHIBA M800 laptop
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Jul 27 03:20:05 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator:     Neko Chang
>Release:        8.1-STABLE amd64
>Organization:
Taiwan
>Environment:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE #0: Sun Jul 25 14:37:44 CST 2010
    root at epopen.com:/usr/obj/usr/src/sys/EpopenKernel amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz (2261.02-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Family = 6  Model = 17  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 3934015488 (3751 MB)
ACPI APIC Table: <INTEL  CRESTLNE>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Cuse4BSD v0.1.11 @ /dev/cuse
ichwd module loaded
acpi0: <TOSQCI TOSQCI00> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4000000-0xf43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: detected 131068k stolen memory
agp0: aperture size is 256M
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> mem 0xf4400000-0xf44fffff at device 2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04800-0xf4a04bff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf4800000-0xf4803fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci7: <ACPI PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8040T Fast Ethernet> irq 16 at device 0.0 on pci7
msk0: <Marvell Technology Group Ltd. Yukon FE+ Id 0xb8 Rev 0x00> on mskc0
msk0: disabling jumbo frame support
msk0: Ethernet address: 00:1e:68:a9:7d:b7
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E3016 10/100 Fast Ethernet PHY> PHY 0 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mskc0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci8: <ACPI PCI bus> on pcib3
pci8: <network> at device 0.0 (no driver attached)
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19 at device 29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04c00-0xf4a04fff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib4
fwohci0: <1394 Open Host Controller Interface> mem 0xff501000-0xff501fff,0xf4700000-0xf47007ff at device 1.0 on pci10
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:1b:24:00:01:1e:77:92
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1b:24:1e:77:92
fwe0: Ethernet address: 02:1b:24:1e:77:92
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1b:24:00:01:1e:77:92 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
sdhci0: <Generic SD HCI> mem 0xf4700800-0xf47008ff at device 1.2 on pci10
sdhci0: 1 slot(s) allocated
sdhci0: [ITHREAD]
mmc0: <MMC/SD bus> on sdhci0
pci10: <mass storage> at device 1.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf4a04000-0xf4a047ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 4> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 5> on atapci0
ata5: [ITHREAD]
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1c00-0x1c1f irq 19 at device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
ichwd0: <Intel ICH9M watchdog timer> on isa0
ichwd0: Intel ICH9M watchdog timer (ICH9 or equivalent)
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xdf000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0xe5 offMax=0x327
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad4: 238475MB <TOSHIBA MK2552GSX LV010M> at ata2-master UDMA100 SATA 1.5Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
acd0: DVDR <MATSHITADVD-RAM UJ862AS/1.50> at ata3-master UDMA33 SATA 1.5Gb/s
hdac0: HDA Codec #0: Conexant CX20561 (Hermosa)
hdac0: HDA Codec #1: Intel G45 HDMI
pcm0: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Conexant CX20561 (Hermosa) PCM #2 Digital> at cad 0 nid 1 on hdac0
pcm3: <HDA Intel G45 HDMI PCM #0 HDMI> at cad 1 nid 1 on hdac0
GEOM: ad4: partition 3 does not start on a track boundary.
GEOM: ad4: partition 3 does not end on a track boundary.
GEOM: ad4: partition 2 does not start on a track boundary.
GEOM: ad4: partition 2 does not end on a track boundary.
GEOM: ad4: partition 1 does not start on a track boundary.
GEOM: ad4: partition 1 does not end on a track boundary.
mmcsd0: 241MB <SD Memory Card> at mmc0 25MHz/4bit
GEOM: mmcsd0: partition 1 does not start on a track boundary.
GEOM: mmcsd0: partition 1 does not end on a track boundary.
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen3.2: <Generic> at usbus3
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.41, addr 2> on usbus3
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe7:ata3:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe7:ata3:0:0:0): CAM status: SCSI Status Error
(probe7:ata3:0:0:0): SCSI status: Check Condition
(probe7:ata3:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
ugen7.2: <Chicony Electronics Co., Ltd.> at usbus7
(probe7:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe7:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe7:umass-sim0:0:0:0): SCSI status: Check Condition
(probe7:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
pass0 at ata3 bus 0 scbus2 target 0 lun 0
pass0: <MATSHITA DVD-RAM UJ862AS 1.50> Removable CD-ROM SCSI-0 device da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <JetFlash TS1GJF150 8.07> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 980MB (2007040 512 byte sectors: 64H 32S/T 980C)

pass0: 33.000MB/s transfers
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s3a
ugen4.2: <vendor 0x08ff> at usbus4
Setting hostuuid: e0f6c98b-29c6-dc11-b6c2-001e68a97db7.
Setting hostid: 0x3f30f98c.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
>Description:
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-bugs mailing list