kern/153303: amr device driver dont detect logical drive amrd0 on
srcu42x on 8_0, 8_1
qwerty
root at qw3rty.org
Mon Dec 20 09:20:10 UTC 2010
>Number: 153303
>Category: kern
>Synopsis: amr device driver dont detect logical drive amrd0 on srcu42x on 8_0, 8_1
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Dec 20 09:20:09 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: qwerty
>Release: freebsd_8_0, freebsd_8_1
>Organization:
svtk.ru
>Environment:
FreeBSD frenzy 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Thu Jan 7 11:59:02 UTC 2010 root at frenzy.home.local:/buildscripts/frenzybuild/build/buildscripts/frenzybuild/src/sys/FRENZY i386
>Description:
after boot system cant detect a logical driver amrd0. i try to boot freebsd_6_3 and it detect driver properly.
----------- dmesg --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Thu Jan 7 11:59:02 UTC 2010
root at frenzy.home.local:/buildscripts/frenzybuild/build/buildscripts/frenzybuild/src/sys/FRENZY
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNXT-ID,xTPR>
real memory = 1073741824 (1024 MB)
avail memory = 1018568704 (971 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP/HT): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
netsmb_dev: loaded
ichwd module loaded
iscsi: version 2.1.0
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 1.0 on pci3
pci4: <PCI bus> on pcib4
amr0: <LSILogic MegaRAID 1.53> mem 0xfe200000-0xfe20ffff,0xfc200000-0xfc27ffff irq 48 at device 0.0 on pci4
amr0: [ITHREAD]
amrp0: <SCSI Passthrough Bus> on amr0
amr0: <LSILogic Intel(R) RAID Controller SRCU42X> Firmware 414C, BIOS H429, 128MB RAM
pci0: <unknown> at device 2.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x6c00-0x6c1f irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x003b
usbus0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x6c20-0x6c3f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0010
usbus1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x6c40-0x6c5f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem 0xfd000000-0xfdffffff,0xfc340000-0xfc340fff irq 21 at device 3.0 on pci5
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x7400-0x743f mem 0xfc341000-0xfc341fff,0xfc300000-0xfc31ffff irq 20 at device 4.0 on pci5
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:d8:7c:dd
fxp0: [ITHREAD]
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x7440-0x747f mem 0xfc320000-0xfc33ffff irq 23 at device 5.0 on pci5
em0: [FILTER]
em0: Ethernet address: 00:02:b3:d8:7d:36
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6c60-0x6c6f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1100-0x111f at device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f0-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ichwd0: <Intel 82801CA watchdog timer> on isa0
ichwd0: Intel 82801CA watchdog timer (ICH3 or equivalent)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe3000-0xe3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
SGI XFS with large block numbers, tracing, no debug enabled
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to deny, logging disabled
amrp1 on amr0
md0: Preloaded image </boot/frenzyroot> 4194304 bytes at 0xc1304ffc
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <Kingston> at usbus1
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 980MB (2007040 512 byte sectors: 64H 32S/T 980C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
Trying to mount root from ufs:/dev/md0
md1.uzip: 7550 x 130560 blocks
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
--------- eof dmesg ------------
---------- pciconf -lv ---------
hostb0 at pci0:0:0:0: class=0x060000 card=0xffffffff chip=0x254c8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'Host Controller (E7501)'
class = bridge
subclass = HOST-PCI
none0 at pci0:0:0:1: class=0xff0000 card=0x34258086 chip=0x25418086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'E7500 System Controller (MCH, Hub Interface A) Error Reporter'
pcib1 at pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25438086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = 'HI_B Virtual PCI-to-PCI Bridge (E7500/E7501)'
class = bridge
subclass = PCI-PCI
none1 at pci0:0:2:1: class=0xff0000 card=0x34258086 chip=0x25448086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'HI_B PCI-to-PCI Bridge Error Reporting (E7500/E7501)'
uhci0 at pci0:0:29:0: class=0x0c0300 card=0x34258086 chip=0x24828086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller *1'
class = serial bus
subclass = USB
uhci1 at pci0:0:29:1: class=0x0c0300 card=0x34258086 chip=0x24848086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller *2'
class = serial bus
subclass = USB
uhci2 at pci0:0:29:2: class=0x0c0300 card=0x34258086 chip=0x24878086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM USB Controller *3 (ICH3-S/ICH3-M)'
class = serial bus
subclass = USB
pcib5 at pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x42 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24808086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) LPC Interface'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:0:31:1: class=0x01018a card=0x34258086 chip=0x248b8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA (ICH3) UltraATA/100 EIDE Controller'
class = mass storage
subclass = ATA
ichsmb0 at pci0:0:31:3: class=0x0c0500 card=0x34258086 chip=0x24838086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) SMBus Controller'
class = serial bus
subclass = SMBus
ioapic0 at pci0:1:28:0: class=0x080020 card=0x34258086 chip=0x14618086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'P64H2 I/O Advanced Programmable Interrupt Controller'
class = base peripheral
subclass = interrupt controller
pcib2 at pci0:1:29:0: class=0x060400 card=0x00000000 chip=0x14608086 rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82870P2 P64H2 PCI/PCI-X Hub Controller'
class = bridge
subclass = PCI-PCI
ioapic1 at pci0:1:30:0: class=0x080020 card=0x34258086 chip=0x14618086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'P64H2 I/O Advanced Programmable Interrupt Controller'
class = base peripheral
subclass = interrupt controller
pcib3 at pci0:1:31:0: class=0x060400 card=0x00000000 chip=0x14608086 rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82870P2 P64H2 PCI/PCI-X Hub Controller'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:3:1:0: class=0x060400 card=0x00000000 chip=0x01a71014 rev=0x03 hdr=0x01
vendor = 'International Business Machines Corp.'
device = 'PCI-X Bridge R1.1 (IBM 133)'
class = bridge
subclass = PCI-PCI
amr0 at pci0:4:0:0: class=0x010400 card=0x05328086 chip=0x04071000 rev=0x02 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'MegaRAID'
class = mass storage
subclass = RAID
vgapci0 at pci0:5:3:0: class=0x030000 card=0x34258086 chip=0x47521002 rev=0x27 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI On-Board VGA for HP Proliant 350 G3 (Rage XL PCI)'
class = display
subclass = VGA
fxp0 at pci0:5:4:0: class=0x020000 card=0x34258086 chip=0x12298086 rev=0x0d hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
em0 at pci0:5:5:0: class=0x020000 card=0x34258086 chip=0x100e8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'Gigabit Ethernet Controller (82540EM)'
class = network
subclass = ethernet
------ eof pciconf -lv ---------
frenzy:/root@[14:14] # ls /dev/amr*
/dev/amr0
frenzy:/root@[14:14] #
>How-To-Repeat:
just use srcu42x configured controller and boot >= freebsd_8
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list