kern/147858: [acpi] acpi_hp not working when loaded via loader.conf

Maciej Suszko maciej at suszko.eu
Fri Aug 20 05:34:28 UTC 2010


vwe at FreeBSD.org wrote:
> Synopsis: [acpi] acpi_hp not working when loaded via loader.conf
> 
> State-Changed-From-To: open->feedback
> State-Changed-By: vwe
> State-Changed-When: Thu Aug 19 21:08:41 UTC 2010
> State-Changed-Why: 
> Maciej,
> please provide a verbose boot dmesg when acpi_hp is loaded from
> loader(8)
> 
> 
> Responsible-Changed-From-To: freebsd-bugs->freebsd-acpi
> Responsible-Changed-By: vwe
> Responsible-Changed-When: Thu Aug 19 21:08:41 UTC 2010
> Responsible-Changed-Why: 
> Over to maintainer(s).
> 
> http://www.freebsd.org/cgi/query-pr.cgi?pr=147858

That's dmesg.boot from 8.1-RELEASE with boot_verbose:

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0: Sat Jul 24 16:14:38 CEST 2010
    root at arsenic:/usr/obj/usr/src/sys/ARSENIC amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80c30000.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff80c30220.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff80c30888.
Preloaded elf obj module "/boot/kernel/if_tap.ko" at 0xffffffff80c30e78.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff80c31460.
Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff80c31ac8.
Preloaded elf obj module "/boot/kernel/coretemp.ko" at 0xffffffff80c320b0.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80c325a0.
Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff80c32600.
Preloaded elf obj module "/boot/kernel/atapicam.ko" at 0xffffffff80c32be8.
Preloaded elf obj module "/boot/kernel/acpi_wmi.ko" at 0xffffffff80c331d8.
Preloaded elf obj module "/boot/kernel/acpi_hp.ko" at 0xffffffff80c33788.
Preloaded elf obj module "/boot/modules/vboxdrv.ko" at 0xffffffff80c33d70.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1995016248 Hz
CPU: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz (1995.02-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Family = 6  Model = f  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20000800<SYSCALL,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 3221225472 (3072 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000c62000 - 0x00000000b9d9cfff, 3105075200 bytes (758075 pages)
avail memory = 3079778304 (2937 MB)
ACPI APIC Table: <HP     30A2    >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
x86bios:   IVT 0x000000-0x0004ff at 0xffffff0000000000
x86bios:  SSEG 0x010000-0x01ffff at 0xffffff8000014000
x86bios:  EBDA 0x09f000-0x09ffff at 0xffffff000009f000
x86bios:   ROM 0x0a0000-0x0effff at 0xffffff00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf7c00 00024 (v2 HP    )
ACPI: XSDT 0xbf7e57c4 00074 (v1 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: FACP 0xbf7e5684 000F4 (v4 HP     30A2     00000003 HP   00000001)
ACPI: DSDT 0xbf7e5ac0 0F9C8 (v1 HP       nx7400 00010000 MSFT 0100000E)
ACPI: FACS 0xbf7f7e80 00040
ACPI: SLIC 0xbf7e5838 00176 (v1 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: HPET 0xbf7e59b0 00038 (v1 HP     30A2     00000001 HP   00000001)
ACPI: APIC 0xbf7e59e8 00068 (v1 HP     30A2     00000001 HP   00000001)
ACPI: MCFG 0xbf7e5a50 0003C (v1 HP     30A2     00000001 HP   00000001)
ACPI: TCPA 0xbf7e5a8c 00032 (v2 HP     30A2     00000001 HP   00000001)
ACPI: SSDT 0xbf7f5488 00326 (v1 HP       HPQSAT 00000001 MSFT 0100000E)
ACPI: SSDT 0xbf7f6003 0025F (v1 HP      Cpu0Tst 00003000 INTL 20060317)
ACPI: SSDT 0xbf7f6262 000A6 (v1 HP      Cpu1Tst 00003000 INTL 20060317)
ACPI: SSDT 0xbf7f6308 004D7 (v1 HP        CpuPm 00003000 INTL 20060317)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
random: <entropy source, Software, Yarrow>
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
acpi0: <HPQOEM SLIC-MPC> on motherboard
PCIe: Memory Mapped configuration base @ 0xf8000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C002.C087 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C002.C098.C220.C221 -> bus 2 dev 6 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff8000009000 pa 0x4000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C002.C003.C0A2 -> bus 0 dev 31 func 0
acpi_hp0: Couldn't find acpi_wmi device
device_attach: acpi_hp0 attach returned 22
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0xbf7f5876 0023D (v1 HP      Cpu0Ist 00003000 INTL 20060317)
ACPI: SSDT 0xbf7f5b38 004CB (v1 HP      Cpu0Cst 00003001 INTL 20060317)
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT 0xbf7f57ae 000C8 (v1 HP      Cpu1Ist 00003000 INTL 20060317)
ACPI: SSDT 0xbf7f5ab3 00085 (v1 HP      Cpu1Cst 00003000 INTL 20060317)
acpi_hp0: Couldn't find acpi_wmi device
device_attach: acpi_hp0 attach returned 22
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
acpi_ec0: warning: EC done before starting event wait
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10 11
  Validation          0   10   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10 11
  Validation          0   10   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  10 11
  Validation          0   11   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10 11
  Validation          0   10   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10 11
  Validation          0   10   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  none
  Validation          0  255   N     0  none
  After Disable       0  255   N     0  none
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x27a0, revid=0x03
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27a2, revid=0x03
        domain=0, bus=0, slot=2, func=0
        class=03-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
        map[10]: type Memory, range 32, base 0xf4400000, size 19, enabled
        map[14]: type I/O Port, range 32, base 0x4000, size  3, enabled
        map[18]: type Prefetchable Memory, range 32, base 0xe0000000, size 28, enabled
        map[1c]: type Memory, range 32, base 0xf4480000, size 18, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27a6, revid=0x03
        domain=0, bus=0, slot=2, func=1
        class=03-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xf4500000, size 19, enabled
found-> vendor=0x8086, dev=0x27d8, revid=0x01
        domain=0, bus=0, slot=27, func=0
        class=04-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xf4580000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27d0, revid=0x01
        domain=0, bus=0, slot=28, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27d2, revid=0x01
        domain=0, bus=0, slot=28, func=1
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27d6, revid=0x01
        domain=0, bus=0, slot=28, func=3
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27c8, revid=0x01
        domain=0, bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        map[20]: type I/O Port, range 32, base 0x4020, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020
found-> vendor=0x8086, dev=0x27c9, revid=0x01
        domain=0, bus=0, slot=29, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
        map[20]: type I/O Port, range 32, base 0x4040, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040
found-> vendor=0x8086, dev=0x27ca, revid=0x01
        domain=0, bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=11
        map[20]: type I/O Port, range 32, base 0x4060, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060
found-> vendor=0x8086, dev=0x27cb, revid=0x01
        domain=0, bus=0, slot=29, func=3
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=10
        map[20]: type I/O Port, range 32, base 0x4080, size  5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080
found-> vendor=0x8086, dev=0x27cc, revid=0x01
        domain=0, bus=0, slot=29, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xf4584000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4584000
found-> vendor=0x8086, dev=0x2448, revid=0xe1
        domain=0, bus=0, slot=30, func=0
        class=06-04-01, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27b9, revid=0x01
        domain=0, bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27df, revid=0x01
        domain=0, bus=0, slot=31, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        map[20]: type I/O Port, range 32, base 0x40a0, size  4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27c5, revid=0x01
        domain=0, bus=0, slot=31, func=2
        class=01-06-01, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
        map[10]: type I/O Port, range 32, base 0x13f0, size  3, enabled
        map[14]: type I/O Port, range 32, base 0x15f4, size  2, enabled
        map[18]: type I/O Port, range 32, base 0x1370, size  3, enabled
        map[1c]: type I/O Port, range 32, base 0x1574, size  2, enabled
        map[20]: type I/O Port, range 32, base 0x40d0, size  4, enabled
        map[24]: type Memory, range 32, base 0xf4585000, size 10, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0x4000-0x4007 mem 0xf4400000-0xf447ffff,0xe0000000-0xefffffff,0xf4480000-0xf44bffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xe0000000
vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xf4400000
vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xf4480000
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf4500000-0xf457ffff at device 2.1 on pci0
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xf4580000-0xf4583fff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf4580000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
hdac0: using IRQ 256 for MSI
hdac0: [MPSAFE]
hdac0: [ITHREAD]
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     8
pcib1:   subordinate bus   8
pcib1:   I/O decode        0xf000-0xfff
pcib1:   no prefetched decode
pci8: <ACPI PCI bus> on pcib1
pci8: domain=0, physical bus=8
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     16
pcib2:   subordinate bus   16
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xf4000000-0xf40fffff
pcib2:   no prefetched decode
pci16: <ACPI PCI bus> on pcib2
pci16: domain=0, physical bus=16
found-> vendor=0x8086, dev=0x4222, revid=0x02
        domain=0, bus=16, slot=0, func=0
        class=02-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 32, base 0xf4000000, size 12, enabled
pcib2: requested memory range 0xf4000000-0xf4000fff: good
pcib2: matched entry for 16.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 17
pci16: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib3:   domain            0
pcib3:   secondary bus     32
pcib3:   subordinate bus   32
pcib3:   I/O decode        0x2000-0x3fff
pcib3:   memory decode     0xf0000000-0xf3ffffff
pcib3:   no prefetched decode
pci32: <ACPI PCI bus> on pcib3
pci32: domain=0, physical bus=32
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x4020-0x403f irq 20 at device 29.0 on pci0
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x4040-0x405f irq 17 at device 29.1 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x4060-0x407f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x4080-0x409f irq 19 at device 29.3 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf4584000-0xf45843ff irq 20 at device 29.7 on pci0
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     2
pcib4:   subordinate bus   3
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xf4100000-0xf43fffff
pcib4:   no prefetched decode
pcib4:   Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib4
pci2: domain=0, physical bus=2
found-> vendor=0x104c, dev=0x8039, revid=0x00
        domain=0, bus=2, slot=6, func=0
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xf4100000, size 12, enabled
pcib4: requested memory range 0xf4100000-0xf4100fff: good
pcib4: matched entry for 2.6.INTA
pcib4: slot 6 INTA hardwired to IRQ 18
found-> vendor=0x14e4, dev=0x170c, revid=0x02
        domain=0, bus=2, slot=14, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xf4108000, size 13, enabled
pcib4: requested memory range 0xf4108000-0xf4109fff: good
pcib4: matched entry for 2.14.INTA
pcib4: slot 14 INTA hardwired to IRQ 16
cbb0: <PCI-CardBus Bridge> mem 0xf4100000-0xf4100fff irq 18 at device 6.0 on pci2
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4100000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: [FILTER]
cbb0: PCI Configuration space:
  0x00: 0x8039104c 0x02100007 0x06070000 0x00824010 
  0x10: 0xf4100000 0x020000a0 0x20030302 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07440112 
  0x40: 0x30a2103c 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x08441060 0x01ab0019 0x00170000 0x01011b22 
  0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e020001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0xc3812924 0x1d0197f9 0x00000000 0x00000000 
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xf4108000-0xf4109fff irq 16 at device 14.0 on pci2
bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xf4108000
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: bpf attached
bfe0: Ethernet address: 00:17:a4:d9:2f:91
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54
bfe0: [MPSAFE]
bfe0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40a0-0x40af irq 16 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40a0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
ahci0: <Intel ICH7M AHCI SATA controller> port 0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0x1577,0x40d0-0x40df mem 0xf4585000-0xf45853ff irq 17 at device 31.2 on pci0
ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xf4585000
ahci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 56
ahci0: using IRQ 257 for MSI
ahci0: [MPSAFE]
ahci0: [ITHREAD]
ahci0: AHCI v1.10 with 4 1.5Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ MPS SS ALP AL CLO 1.5Gbps PM PMD SSC PSC 32cmd 4ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [MPSAFE]
ahcich0: [ITHREAD]
ahcich0: Caps:
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (256.0C)
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 58
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
Reducing kern.maxvnodes 195721 -> 100000
procfs registered
ZFS filesystem version 3
ZFS storage pool version 14
lapic: Divisor 2, Frequency 83125683 Hz
Timecounter "TSC" frequency 1995016248 Hz quality -100
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x114 offMax=0x474
lo0: bpf attached
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
battery0: battery initialization start
battery1: battery initialization start
acpi_acad0: acline initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting UDMA33
acpi_tz0: _AC3: temperature 60.0 >= setpoint 50.0
acpi_tz0: _AC2: temperature 60.0 >= setpoint 60.0
acpi_tz0: switched from NONE to _AC2: 60.0C
acd0: <HL-DT-ST DVDRAM GSA-T40N/JQ01> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Analog Devices AD1981HD
hdac0:  HDA Codec ID: 0x11d41981
hdac0:        Vendor: 0x11d4
hdac0:        Device: 0x1981
hdac0:      Revision: 0x02
hdac0:      Stepping: 0x00
hdac0: PCI Subvendor: 0x30a2103c
hdac0:  Found audio FG nid=1 startnode=2 endnode=32 total=30
hdac0: Probing codec #1...
hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown)
hdac0:  HDA Codec ID: 0x11c11040
hdac0:        Vendor: 0x11c1
hdac0:        Device: 0x1040
hdac0:      Revision: 0x02
hdac0:      Stepping: 0x00
hdac0: PCI Subvendor: 0x30a2103c
hdac0:  Found modem FG nid=1 startnode=2 endnode=127 total=125
hdac0: 
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdac0: GHOST: nid=2 j=0 entnum=4 index=0 res=0x00000401
hdac0:  nid 5 0x92174110 as  1 seq  0       Speaker Fixed jack  7 loc 18 color   Green misc 1
hdac0:  nid 6 0x0421201f as  1 seq 15    Headphones  Jack jack  1 loc  4 color    Grey misc 0
hdac0:  nid 7 0x410710f0 as 15 seq  0      Line-out  None jack  7 loc  1 color   Black misc 0
hdac0:  nid 8 0x04a12020 as  2 seq  0           Mic  Jack jack  1 loc  4 color    Grey misc 0
hdac0:  nid 9 0x0181302e as  2 seq 14       Line-in  Jack jack  1 loc  1 color    Blue misc 0
hdac0:  nid 10 0x4145f0f0 as 15 seq  0     SPDIF-out  None jack  5 loc  1 color   Other misc 0
hdac0:  nid 22 0x995711f0 as 15 seq  0   Digital-out Fixed jack  7 loc 25 color   Black misc 1
hdac0:  nid 23 0x5993e0f0 as 15 seq  0           AUX  None jack  3 loc 25 color   White misc 0
hdac0:  nid 24 0x59a790f0 as 15 seq  0           Mic  None jack  7 loc 25 color    Pink misc 0
hdac0:  nid 25 0x593310f0 as 15 seq  0            CD  None jack  3 loc 25 color   Black misc 0
hdac0: Patched pins configuration:
hdac0:  nid 5 0x92174110 as  1 seq  0       Speaker Fixed jack  7 loc 18 color   Green misc 1
hdac0:  nid 6 0x0421201f as  1 seq 15    Headphones  Jack jack  1 loc  4 color    Grey misc 0
hdac0:  nid 7 0x410710f0 as 15 seq  0      Line-out  None jack  7 loc  1 color   Black misc 0 [DISABLED]
hdac0:  nid 8 0x04a12020 as  2 seq  0           Mic  Jack jack  1 loc  4 color    Grey misc 0
hdac0:  nid 9 0x0181302e as  2 seq 14       Line-in  Jack jack  1 loc  1 color    Blue misc 0
hdac0:  nid 10 0x4145f0f0 as 15 seq  0     SPDIF-out  None jack  5 loc  1 color   Other misc 0 [DISABLED]
hdac0:  nid 22 0x995711f0 as 15 seq  0   Digital-out Fixed jack  7 loc 25 color   Black misc 1
hdac0:  nid 23 0x5993e0f0 as 15 seq  0           AUX  None jack  3 loc 25 color   White misc 0 [DISABLED]
hdac0:  nid 24 0x59a790f0 as 15 seq  0           Mic  None jack  7 loc 25 color    Pink misc 0 [DISABLED]
hdac0:  nid 25 0x593310f0 as 15 seq  0            CD  None jack  3 loc 25 color   Black misc 0 [DISABLED]
hdac0: 3 associations found:
hdac0: Association 0 (1) out:
hdac0:  Pin nid=5 seq=0
hdac0:  Pin nid=6 seq=15
hdac0: Association 1 (2) in:
hdac0:  Pin nid=8 seq=0
hdac0:  Pin nid=9 seq=14
hdac0: Association 2 (15) out:
hdac0:  Pin nid=22 seq=0
hdac0: Tracing association 0 (1)
hdac0:  Pin 5 traced to DAC 3
hdac0:  Pin 6 traced to DAC 3 and hpredir 0
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing association 1 (2)
hdac0:  Pin 8 traced to ADC 4
hdac0:  Pin 9 traced to ADC 4
hdac0: Association 1 (2) trace succeeded
hdac0: Tracing association 2 (15)
hdac0:  Unable to trace pin 22 seq 0 with min nid 0
hdac0: Association 2 (15) trace failed
hdac0: Tracing input monitor
hdac0:  Tracing nid 12 to out
hdac0: Tracing other input monitors
hdac0:  Tracing nid 8 to out
hdac0:  nid 8 is input monitor
hdac0:  Tracing nid 9 to out
hdac0:  nid 9 is input monitor
hdac0: Tracing beeper
hdac0:  nid 16 traced to out
hdac0: Enabling headphone/speaker audio routing switching:
hdac0:  as=0 sense nid=6 [UNSOL]
hdac0: Pin sense: nid=6 res=0x8000dfdf
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0: 
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0: 
hdac0: Default Parameter
hdac0: -----------------
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e007f
hdac0:                  16 20 24 bits, 8 11 16 22 32 44 48 KHz
hdac0:          IN amp: 0x00270300
hdac0:         OUT amp: 0x80053f3d
hdac0: 
hdac0:             nid: 2 [DISABLED]
hdac0:            Name: audio output
hdac0:      Widget cap: 0x00030311
hdac0:                  DIGITAL STEREO
hdac0:      Stream cap: 0x00000005
hdac0:                  AC3 PCM
hdac0:         PCM cap: 0x00020060
hdac0:                  16 bits, 44 48 KHz
hdac0:     connections: 2
hdac0:           |
hdac0:           + [DISABLED] <- nid=1 [GHOST!] [UNKNOWN] (selected)
hdac0:           + <- nid=4 [audio input]
hdac0: 
hdac0:             nid: 3
hdac0:            Name: audio output
hdac0:      Widget cap: 0x00000441
hdac0:                  PWR PROC STEREO
hdac0:     Association: 0 (0x00008001)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e007f
hdac0:                  16 20 24 bits, 8 11 16 22 32 44 48 KHz
hdac0: 
hdac0:             nid: 4
hdac0:            Name: audio input
hdac0:      Widget cap: 0x00100511
hdac0:                  PWR STEREO
hdac0:     Association: 1 (0x00004001)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x0006007f
hdac0:                  16 20 bits, 8 11 16 22 32 44 48 KHz
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=21 [audio selector]
hdac0: 
hdac0:             nid: 5
hdac0:            Name: pin: Speaker (Fixed)
hdac0:      Widget cap: 0x00400187
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000001)
hdac0:         Pin cap: 0x0001173f
hdac0:                  ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ] EAPD
hdac0:      Pin config: 0x92174110
hdac0:     Pin control: 0x00000040 OUT
hdac0:            EAPD: 0x00000002
hdac0:      Output amp: 0x80053f3d
hdac0:                  mute=1 step=63 size=5 offset=61
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 2
hdac0:           |
hdac0:           + [DISABLED] <- nid=3 [audio output]
hdac0:           + <- nid=14 [audio mixer] (selected)
hdac0: 
hdac0:             nid: 6
hdac0:            Name: pin: Headphones (Grey Jack)
hdac0:      Widget cap: 0x00400185
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00008000)
hdac0:         Pin cap: 0x0000001f
hdac0:                  ISC TRQD PDC HP OUT
hdac0:      Pin config: 0x0421201f
hdac0:     Pin control: 0x000000c0 HP OUT
hdac0:      Output amp: 0x80053f3d
hdac0:                  mute=1 step=63 size=5 offset=61
hdac0:     connections: 2
hdac0:           |
hdac0:           + [DISABLED] <- nid=3 [audio output]
hdac0:           + <- nid=14 [audio mixer] (selected)
hdac0: 
hdac0:             nid: 7 [DISABLED]
hdac0:            Name: pin: Line-out (None)
hdac0:      Widget cap: 0x00400104
hdac0:         Pin cap: 0x00000010
hdac0:                  OUT
hdac0:      Pin config: 0x410710f0
hdac0:     Pin control: 0x00000000
hdac0:      Output amp: 0x80053f3d
hdac0:                  mute=1 step=63 size=5 offset=61
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=15 [audio mixer] [DISABLED]
hdac0: 
hdac0:             nid: 8
hdac0:            Name: pin: Mic (Grey Jack)
hdac0:      Widget cap: 0x00400083
hdac0:                  UNSOL STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: mic (mic)
hdac0:         Pin cap: 0x00001727
hdac0:                  ISC TRQD PDC IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x04a12020
hdac0:     Pin control: 0x00000024 IN VREFs
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0: 
hdac0:             nid: 9
hdac0:            Name: pin: Line-in (Blue Jack)
hdac0:      Widget cap: 0x00400187
hdac0:                  UNSOL STEREO
hdac0:     Association: 1 (0x00004000)
hdac0:             OSS: line (line)
hdac0:         Pin cap: 0x00001737
hdac0:                  ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x0181302e
hdac0:     Pin control: 0x00000024 IN VREFs
hdac0:      Output amp: 0x80053f3d
hdac0:                  mute=1 step=63 size=5 offset=61
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 2
hdac0:           |
hdac0:           + [DISABLED] <- nid=3 [audio output] (selected)
hdac0:           + [DISABLED] <- nid=14 [audio mixer]
hdac0: 
hdac0:             nid: 10 [DISABLED]
hdac0:            Name: pin: SPDIF-out (None)
hdac0:      Widget cap: 0x00400301
hdac0:                  DIGITAL STEREO
hdac0:         Pin cap: 0x00000010
hdac0:                  OUT
hdac0:      Pin config: 0x4145f0f0
hdac0:     Pin control: 0x00000000
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=2 [audio output] [DISABLED]
hdac0: 
hdac0:             nid: 11 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x00300101
hdac0:                  STEREO
hdac0:     connections: 6
hdac0:           |
hdac0:           + <- nid=3 [audio output] (selected)
hdac0:           + <- nid=12 [audio mixer]
hdac0:           + <- nid=9 [pin: Line-in (Blue Jack)]
hdac0:           + <- nid=14 [audio mixer]
hdac0:           + <- nid=5 [pin: Speaker (Fixed)]
hdac0:           + [DISABLED] <- nid=24 [pin: Mic (None)] [DISABLED]
hdac0: 
hdac0:             nid: 12
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x00200101
hdac0:                  STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: mic
hdac0:     connections: 2
hdac0:           |
hdac0:           + <- nid=30 [audio selector]
hdac0:           + [DISABLED] <- nid=31 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 13
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010c
hdac0:     Association: -2 (0x00000000)
hdac0:             OSS: speaker
hdac0:      Output amp: 0x800b0f0f
hdac0:                  mute=1 step=15 size=11 offset=15
hdac0:     connections: 2
hdac0:           |
hdac0:           + <- nid=16 [beep widget] (selected)
hdac0:           + [DISABLED] <- nid=22 [pin: Digital-out (Fixed)] [DISABLED]
hdac0: 
hdac0:             nid: 14
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x00200101
hdac0:                  STEREO
hdac0:     Association: 0 (0x00008001)
hdac0:             OSS: pcm, speaker, line, mic
hdac0:     connections: 8
hdac0:           |
hdac0:           + <- nid=13 [audio selector]
hdac0:           + <- nid=17 [audio selector]
hdac0:           + <- nid=18 [audio selector]
hdac0:           + <- nid=19 [audio selector]
hdac0:           + [DISABLED] <- nid=26 [audio selector] [DISABLED]
hdac0:           + [DISABLED] <- nid=27 [audio selector] [DISABLED]
hdac0:           + [DISABLED] <- nid=28 [audio selector] [DISABLED]
hdac0:           + [DISABLED] <- nid=29 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 15 [DISABLED]
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x00200100
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=11 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 16
hdac0:            Name: beep widget
hdac0:      Widget cap: 0x00700000
hdac0:     Association: -2 (0x00000000)
hdac0:             OSS: speaker (speaker)
hdac0: 
hdac0:             nid: 17
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:     Association: 0 (0x00008001)
hdac0:             OSS: pcm
hdac0:      Output amp: 0x80051f17
hdac0:                  mute=1 step=31 size=5 offset=23
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=3 [audio output]
hdac0: 
hdac0:             nid: 18
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:     Association: -2 (0x00000000)
hdac0:             OSS: mic
hdac0:      Output amp: 0x80051f17
hdac0:                  mute=1 step=31 size=5 offset=23
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=8 [pin: Mic (Grey Jack)]
hdac0: 
hdac0:             nid: 19
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:     Association: -2 (0x00000000)
hdac0:             OSS: line
hdac0:      Output amp: 0x80051f17
hdac0:                  mute=1 step=31 size=5 offset=23
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=9 [pin: Line-in (Blue Jack)]
hdac0: 
hdac0:             nid: 20 [DISABLED]
hdac0:            Name: power widget
hdac0:      Widget cap: 0x00500500
hdac0:                  PWR
hdac0:     connections: 13
hdac0:           |
hdac0:           + <- nid=13 [audio selector] (selected)
hdac0:           + <- nid=14 [audio mixer]
hdac0:           + <- nid=15 [audio mixer] [DISABLED]
hdac0:           + <- nid=16 [beep widget]
hdac0:           + <- nid=19 [audio selector]
hdac0:           + <- nid=20 [power widget] [DISABLED]
hdac0:           + <- nid=21 [audio selector]
hdac0:           + <- nid=22 [pin: Digital-out (Fixed)] [DISABLED]
hdac0:           + <- nid=23 [pin: AUX (None)] [DISABLED]
hdac0:           + <- nid=24 [pin: Mic (None)] [DISABLED]
hdac0:           + <- nid=25 [pin: CD (None)] [DISABLED]
hdac0:           + <- nid=26 [audio selector] [DISABLED]
hdac0:           + <- nid=29 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 21
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:     Association: 1 (0x00004001)
hdac0:             OSS: line, mic
hdac0:      Output amp: 0x80050f00
hdac0:                  mute=1 step=15 size=5 offset=0
hdac0:     connections: 8
hdac0:           |
hdac0:           + <- nid=12 [audio mixer] (selected)
hdac0:           + <- nid=9 [pin: Line-in (Blue Jack)]
hdac0:           + [DISABLED] <- nid=14 [audio mixer]
hdac0:           + [DISABLED] <- nid=15 [audio mixer] [DISABLED]
hdac0:           + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=5 [pin: Speaker (Fixed)]
hdac0:           + [DISABLED] <- nid=24 [pin: Mic (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED]
hdac0: 
hdac0:             nid: 22 [DISABLED]
hdac0:            Name: pin: Digital-out (Fixed)
hdac0:      Widget cap: 0x00400000
hdac0:         Pin cap: 0x00000020
hdac0:                  IN
hdac0:      Pin config: 0x995711f0
hdac0:     Pin control: 0x00000000
hdac0: 
hdac0:             nid: 23 [DISABLED]
hdac0:            Name: pin: AUX (None)
hdac0:      Widget cap: 0x00400081
hdac0:                  UNSOL STEREO
hdac0:         Pin cap: 0x00000027
hdac0:                  ISC TRQD PDC IN
hdac0:      Pin config: 0x5993e0f0
hdac0:     Pin control: 0x00000000
hdac0: 
hdac0:             nid: 24 [DISABLED]
hdac0:            Name: pin: Mic (None)
hdac0:      Widget cap: 0x00400187
hdac0:                  UNSOL STEREO
hdac0:         Pin cap: 0x00001737
hdac0:                  ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x59a790f0
hdac0:     Pin control: 0x00000000
hdac0:      Output amp: 0x80053f3d
hdac0:                  mute=1 step=63 size=5 offset=61
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 2
hdac0:           |
hdac0:           + [DISABLED] <- nid=3 [audio output] (selected)
hdac0:           + <- nid=14 [audio mixer]
hdac0: 
hdac0:             nid: 25 [DISABLED]
hdac0:            Name: pin: CD (None)
hdac0:      Widget cap: 0x00400001
hdac0:                  STEREO
hdac0:         Pin cap: 0x00000020
hdac0:                  IN
hdac0:      Pin config: 0x593310f0
hdac0:     Pin control: 0x00000000
hdac0: 
hdac0:             nid: 26 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:      Output amp: 0x80051f17
hdac0:                  mute=1 step=31 size=5 offset=23
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=5 [pin: Speaker (Fixed)]
hdac0: 
hdac0:             nid: 27 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:      Output amp: 0x80051f17
hdac0:                  mute=1 step=31 size=5 offset=23
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED]
hdac0: 
hdac0:             nid: 28 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:      Output amp: 0x80051f17
hdac0:                  mute=1 step=31 size=5 offset=23
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=24 [pin: Mic (None)] [DISABLED]
hdac0: 
hdac0:             nid: 29 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:      Output amp: 0x80051f17
hdac0:                  mute=1 step=31 size=5 offset=23
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED]
hdac0: 
hdac0:             nid: 30
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: mic
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=8 [pin: Mic (Grey Jack)]
hdac0: 
hdac0:             nid: 31 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=24 [pin: Mic (None)] [DISABLED]
hdac0: 
hdac0: Processing modem FG cad=1 nid=1...
hdac0: 
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0: 
pcm0: Playback:
pcm0: 
pcm0:      Stream cap: 0x00000001
pcm0:                  PCM
pcm0:         PCM cap: 0x000e007f
pcm0:                  16 20 24 bits, 8 11 16 22 32 44 48 KHz
pcm0:             DAC: 3
pcm0: 
pcm0: Record:
pcm0: 
pcm0:      Stream cap: 0x00000001
pcm0:                  PCM
pcm0:         PCM cap: 0x0006007f
pcm0:                  16 20 bits, 8 11 16 22 32 44 48 KHz
pcm0:             ADC: 4
pcm0: 
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0: 
pcm0: Playback:
pcm0: 
pcm0:     nid=5 [pin: Speaker (Fixed)]
pcm0:       |
pcm0:       + <- nid=14 [audio mixer] [src: pcm, speaker, line, mic]
pcm0:              |
pcm0:              + <- nid=13 [audio selector] [src: speaker]
pcm0:                     |
pcm0:                     + <- nid=16 [beep widget] [src: speaker]
pcm0:              + <- nid=17 [audio selector] [src: pcm]
pcm0:                     |
pcm0:                     + <- nid=3 [audio output] [src: pcm]
pcm0:              + <- nid=18 [audio selector] [src: mic]
pcm0:                     |
pcm0:                     + <- nid=8 [pin: Mic (Grey Jack)] [src: mic]
pcm0:              + <- nid=19 [audio selector] [src: line]
pcm0:                     |
pcm0:                     + <- nid=9 [pin: Line-in (Blue Jack)] [src: line]
pcm0: 
pcm0:     nid=6 [pin: Headphones (Grey Jack)]
pcm0:       |
pcm0:       + <- nid=14 [audio mixer] [src: pcm, speaker, line, mic]
pcm0:              |
pcm0:              + <- nid=13 [audio selector] [src: speaker]
pcm0:                     |
pcm0:                     + <- nid=16 [beep widget] [src: speaker]
pcm0:              + <- nid=17 [audio selector] [src: pcm]
pcm0:                     |
pcm0:                     + <- nid=3 [audio output] [src: pcm]
pcm0:              + <- nid=18 [audio selector] [src: mic]
pcm0:                     |
pcm0:                     + <- nid=8 [pin: Mic (Grey Jack)] [src: mic]
pcm0:              + <- nid=19 [audio selector] [src: line]
pcm0:                     |
pcm0:                     + <- nid=9 [pin: Line-in (Blue Jack)] [src: line]
pcm0: 
pcm0: Record:
pcm0: 
pcm0:     nid=4 [audio input]
pcm0:       |
pcm0:       + <- nid=21 [audio selector] [src: line, mic]
pcm0:              |
pcm0:              + <- nid=12 [audio mixer] [src: mic]
pcm0:                     |
pcm0:                     + <- nid=30 [audio selector] [src: mic]
pcm0:                            |
pcm0:                            + <- nid=8 [pin: Mic (Grey Jack)] [src: mic]
pcm0:              + <- nid=9 [pin: Line-in (Blue Jack)] [src: line]
pcm0: 
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0: 
pcm0: Master Volume (OSS: vol)
pcm0:    |
pcm0:    +- ctl  1 (nid   5 in ):    -91/3dB (64 steps) + mute
pcm0:    +- ctl  3 (nid   6 in ):    -91/3dB (64 steps) + mute
pcm0: 
pcm0: PCM Volume (OSS: pcm)
pcm0:    |
pcm0:    +- ctl  9 (nid  17 out):    -34/12dB (32 steps) + mute
pcm0: 
pcm0: Microphone Volume (OSS: mic)
pcm0:    |
pcm0:    +- ctl  5 (nid   8 out):    0/30dB (4 steps)
pcm0:    +- ctl 19 (nid  30 out):    mute
pcm0: 
pcm0: Line-in Volume (OSS: line)
pcm0:    |
pcm0:    +- ctl  7 (nid   9 out):    0/30dB (4 steps)
pcm0: 
pcm0: Speaker/Beep Volume (OSS: speaker)
pcm0:    |
pcm0:    +- ctl  8 (nid  13 out):    -45/0dB (16 steps) + mute
pcm0: 
pcm0: Recording Level (OSS: rec)
pcm0:    |
pcm0:    +- ctl 12 (nid  21 out):    0/22dB (16 steps) + mute
pcm0:    +- ctl 19 (nid  30 out):    mute
pcm0: 
pcm0: Input Monitoring Level (OSS: igain)
pcm0:    |
pcm0:    +- ctl  8 (nid  13 out):    -45/0dB (16 steps) + mute
pcm0:    +- ctl 10 (nid  18 out):    -34/12dB (32 steps) + mute
pcm0:    +- ctl 11 (nid  19 out):    -34/12dB (32 steps) + mute
pcm0: 
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap b9c60000, 4000; 0xffffff81483e7000 -> b9c60000
pcm0: sndbuf_setmap b9c70000, 4000; 0xffffff81483f7000 -> b9c70000
ahcich0: AHCI reset...
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_tz0: _AC3: temperature 60.0 >= setpoint 50.0
acpi_tz0: _CRT value is absurd, ignored (256.0C)
acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0
ahcich0: SATA connect time=0ms status=00000113
ahcich0: ready wait time=2ms
ahcich0: AHCI reset done: device found
(aprobe0:ahcich0:0:15:0): SIGNATURE: 0000
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
(probe0:ata0:0:0:0): SCSI status error
(probe0:ata0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0 
(probe0:ata0:0:0:0): CAM status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI status: Check Condition
(probe0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST csi:12,1,0,0 asc:24,0 (Invalid field in CDB): Command byte 1 is invalid
(probe0:ata0:0:0:0): Error 22, Unretryable error
(probe0:ata0:0:0:0): Down reving Protocol Version from 2 to 0?
(probe0:ata0:0:0:0): SCSI status error
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata0:0:0:0): CAM status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI status: Check Condition
(probe0:ata0:0:0:0): SCSI sense: NOT READY csi:0,0,bb,0 asc:3a,0 (Medium not present)
(probe0:ata0:0:0:0): Error 6, Unretryable error
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <SAMSUNG HM641JI 2AJ10001> ATA-8 SATA 2.x device
pass0: Serial Number S23TJDQZ200497
pass0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ata0 bus 0 scbus1 target 0 lun 0
pass1: <HL-DT-ST DVDRAM GSA-T40N JQ01> Removable CD-ROM SCSI-0 device 
pass1: 33.000MB/s transfers
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG HM641JI 2AJ10001> ATA-8 SATA 2.x device
ada0: Serial Number S23TJDQZ200497
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytesGEOM: new disk cd0
GEOM: new disk ada0
)
ada0: Command Queueing enabled
ada0: 610480MB (1250263728 512 byte sectors: 15H 63S/T 16383C)
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY csi:0,0,bb,0 asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
cd0 at ata0 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-T40N JQ01> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51
msi: Assigning MSI IRQ 256 to local APIC 1 vector 52
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY csi:0,0,bb,0 asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY csi:0,0,bb,0 asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
Trying to mount root from zfs:tank/ROOT/freebsd-81
ugen2.2: <Logitech> at usbus2
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 2> on usbus2
ums0: 8 buttons and [XYZT] coordinates ID=0
ct_to_ts([2010-08-20 07:05:11]) = 1282287911.000000000
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
linsysfs registered
vboxnet0: bpf attached
vboxnet0: Ethernet address: 0a:00:27:00:00:00
acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0
bfe0: link state changed to UP
-- 
regards, Maciej Suszko.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-bugs/attachments/20100820/cf94b228/signature-0001.pgp


More information about the freebsd-bugs mailing list