kern/149219: DL380 G6 P212 trouble

[Anton Gorlov]

>Number:         149219
>Category:       kern
>Synopsis:       DL380 G6 P212 trouble
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Aug 03 06:50:05 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator:     Anton Gorlov
>Release:        8.1-RELEASE
>Organization:
Joint stock company limited "ER-Telecom"
>Environment:
FreeBSD mail.espenza.ru 8.1-RELEASE FreeBSD 8.1-RELEASE #5: Mon Aug  2 14:40:42 MSD 2010     root at mail.espenza.ru:/usr/obj/usr/src/sys/STLK7  amd64
>Description:
HP DL180 G6 can't boot sometimes with messages:
ciss0: completed invalid request 15704 (0x9a021)
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config 
...

all firmware is already up to date

dmesg.boot

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #5: Mon Aug  2 14:40:42 MSD 2010
    root at mail:/usr/obj/usr/src/sys/STLK7 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz (2266.76-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 17179869184 (16384 MB)
avail memory = 16540430336 (15774 MB)
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
 cpu8 (AP): APIC ID: 16
 cpu9 (AP): APIC ID: 17
 cpu10 (AP): APIC ID: 18
 cpu11 (AP): APIC ID: 19
 cpu12 (AP): APIC ID: 20
 cpu13 (AP): APIC ID: 21
 cpu14 (AP): APIC ID: 22
 cpu15 (AP): APIC ID: 23
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci7: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0xe880-0xe89f mem 0xfbe60000-0xfbe7ffff,0xfbe40000-0xfbe5ffff,0xfbeb8000-0xfbebbfff irq 28 at device 0.0 on pci7
igb0: Using MSIX interrupts with 10 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 18:a9:05:70:cb:32
igb1: <Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0xec00-0xec1f mem 0xfbee0000-0xfbefffff,0xfbec0000-0xfbedffff,0xfbebc000-0xfbebffff irq 40 at device 0.1 on pci7
igb1: Using MSIX interrupts with 10 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 18:a9:05:70:cb:33
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib2
ciss0: <HP Smart Array P212> port 0xd800-0xd8ff mem 0xfb800000-0xfbbfffff,0xfbdff000-0xfbdfffff irq 24 at device 0.0 on pci6
ciss0: PERFORMANT Transport
ciss0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfa7f8000-0xfa7f83ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfb7fc000-0xfb7fffff,0xfa800000-0xfaffffff irq 16 at device 0.0 on pci2
uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb880-0xb89f irq 23 at device 29.0 on pci0
uhci1: [ITHREAD]
usbus2: <Intel 82801JI (ICH10) USB controller USB-A> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0xbc00-0xbc1f irq 19 at device 29.1 on pci0
uhci2: [ITHREAD]
usbus3: <Intel 82801JI (ICH10) USB controller USB-B> on uhci2
uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0xc000-0xc01f irq 18 at device 29.2 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801JI (ICH10) USB controller USB-C> on uhci3
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfa7fa000-0xfa7fa3ff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus5: waiting for BIOS to give up control
usbus5: timed out waiting for BIOS
usbus5: EHCI version 1.0
usbus5: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc09f mem 0xfa7fc000-0xfa7fc7ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
Timecounters tick every 1.000 msec
IP Filter: v4.1.28 initialized.  Default = pass all, Logging = enabled
ipfw2 initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to accept, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub5: 6 ports with 6 removable, self powered
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-5 device 
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-5 device 
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 1430767MB (2930211632 512 byte sectors: 255H 63S/T 65535C)
da2 at ciss0 bus 0 scbus0 target 2 lun 0
da2: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-5 device 
da2: 135.168MB/s transfers
da2: Command Queueing enabled
da2: 1430767MB (2930211632 512 byte sectors: 255H 63S/T 65535C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #9 Launched!
ugen2.2: <vendor 0x04d9> at usbus2
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on usbus2
kbd2 at ukbd0
Trying to mount root from ufs:/dev/da0s1a
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on usbus2
ZFS filesystem version 3
ZFS storage pool version 14
igb0: link state changed to UP
vlan50: link state changed to UP
vlan21: link state changed to UP

>How-To-Repeat:
boot 8.1-RELEASE on HP DL180 G6 server (in my case 3 logical drive (mirror) 2sata and 1 SAS)
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted: