bin/138771: mouse fails with ACPI enabled

Sun Sep 13 11:30:10 UTC 2009

The following reply was made to PR bin/138771; it has been noted by GNATS.

From: Eitan Adler <eitanadlerlist at gmail.com>
To: FreeBSD-gnats-submit at freebsd.org, freebsd-bugs at freebsd.org
Cc:  
Subject: Re: bin/138771: mouse fails with ACPI enabled
Date: Sun, 13 Sep 2009 13:56:28 +0300

 Lenovo G530 laptop

 ...
 FreeBSD 8.0-BETA4 #0: Sun Sep  6 05:51:03 UTC 2009
     root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 WARNING: WITNESS option enabled, expect reduced performance.
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Pentium(R) Dual-Core CPU       T4200  @ 2.00GHz (1995.02-MHz 686-class=
  CPU)
   Origin =3D "GenuineIntel"  Id =3D 0x1067a  Stepping =3D 10
   Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
 E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=3D0x400e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM=
 ,XSAVE>
   AMD Features=3D0x20100000<NX,LM>
   AMD Features2=3D0x1<LAHF>
   TSC: P-state invariant
 real memory  =3D 2147483648 (2048 MB)
 avail memory =3D 2046509056 (1951 MB)
 MPTable: <INTEL    MontavinaCRB>
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0: Assuming intbase of 0
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 kbd1 at kbdmux0
 pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
 pci0: <PCI bus> on pcib0
 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem
 0xf4000000-0xf43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on
 pci0
 agp0: <Intel GM45 SVGA controller> on vgapci0
 agp0: detected 32764k stolen memory
 agp0: aperture size is 256M
 vgapci1: <VGA-compatible display> mem 0xf4400000-0xf44fffff at device
 2.1 on pci0
 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16
 at device 26.0 on pci0
 uhci0: [ITHREAD]
 uhci0: LegSup =3D 0x003b
 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21
 at device 26.1 on pci0
 uhci1: [ITHREAD]
 uhci1: LegSup =3D 0x0010
 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20
 at device 26.2 on pci0
 uhci2: [ITHREAD]
 uhci2: LegSup =3D 0x0010
 usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
 0xf4a04800-0xf4a04bff irq 20 at device 26.7 on pci0
 ehci0: [ITHREAD]
 usbus3: waiting for BIOS to give up control
 usbus3: EHCI version 1.0
 usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
 hdac0: <Intel 82801I High Definition Audio Controller> mem
 0xf4a00000-0xf4a03fff irq 22 at device 27.0 on pci0
 hdac0: HDA Driver Revision: 20090624_0136
 hdac0: [ITHREAD]
 pcib1: <MPTable PCI-PCI bridge> irq 17 at device 28.0 on pci0
 pci2: <PCI bus> on pcib1
 pci2: <base peripheral> at device 0.0 (no driver attached)
 pci2: <base peripheral, SD host controller> at device 0.2 (no driver attach=
 ed)
 pci2: <base peripheral> at device 0.3 (no driver attached)
 pcib2: <PCI-PCI bridge> irq 16 at device 28.1 on pci0
 pci3: <PCI bus> on pcib2
 pcib3: <MPTable PCI-PCI bridge> irq 18 at device 28.2 on pci0
 pci4: <PCI bus> on pcib3
 pci4: <network> at device 0.0 (no driver attached)
 pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
 pci5: <PCI bus> on pcib4
 pcib5: <MPTable PCI-PCI bridge> irq 16 at device 28.5 on pci0
 pci7: <PCI bus> on pcib5
 bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem
 0xf4600000-0xf460ffff irq 17 at device 0.0 on pci7
 miibus0: <MII bus> on bge0
 brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
 brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 bge0: Ethernet address: 00:23:5a:d3:1c:ba
 bge0: [ITHREAD]
 uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23
 at device 29.0 on pci0
 uhci3: [ITHREAD]
 uhci3: LegSup =3D 0x2030
 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19
 at device 29.1 on pci0
 uhci4: [ITHREAD]
 uhci4: LegSup =3D 0x0010
 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
 uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18
 at device 29.2 on pci0
 uhci5: [ITHREAD]
 uhci5: LegSup =3D 0x0010
 usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem
 0xf4a04c00-0xf4a04fff irq 23 at device 29.7 on pci0
 ehci1: [ITHREAD]
 usbus7: waiting for BIOS to give up control
 usbus7: timed out waiting for BIOS
 usbus7: EHCI version 1.0
 usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
 pcib6: <PCI-PCI bridge> at device 30.0 on pci0
 pci8: <PCI bus> on pcib6
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel AHCI controller> port
 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff
 mem 0xf4a04000-0xf4a047ff irq 19 at device 31.2 on pci0
 atapci0: [ITHREAD]
 atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM not supported
 ata2: <ATA channel 0> on atapci0
 ata2: [ITHREAD]
 ata3: <ATA channel 1> on atapci0
 ata3: [ITHREAD]
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 cpu0 on motherboard
 coretemp0: <CPU On-Die Thermal Sensors> on cpu0
 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 61f0a2306000a23
 device_attach: est0 attach returned 6
 p4tcc0: <CPU Frequency Thermal Control> on cpu0
 cpu1 on motherboard
 coretemp1: <CPU On-Die Thermal Sensors> on cpu1
 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 61f0a2306000a23
 device_attach: est1 attach returned 6
 p4tcc1: <CPU Frequency Thermal Control> on cpu1
 pmtimer0 on isa0
 unknown: <PNP0c02> can't assign resources (memory)
 unknown: <PNP0c01> can't assign resources (memory)
 atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid
 PNP0303 on isa0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 unknown: <PNP0c02> can't assign resources (memory)
 unknown: <PNP0c02> can't assign resources (memory)
 unknown: <PNP0c02> can't assign resources (memory)
 unknown: <INT0800> can't assign resources (memory)
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model GlidePoint, device ID 0
 orm0: <ISA Option ROMs> at iomem
 0xc0000-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=3D0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
 ata0: [ITHREAD]
 ata1 at port 0x170-0x177,0x376 irq 15 on isa0
 ata1: [ITHREAD]
 ppc0: parallel port not found.
 unknown: <PNP0c02> can't assign resources (memory)
 unknown: <PNP0c01> can't assign resources (memory)
 unknown: <PNP0c02> can't assign resources (memory)
 unknown: <PNP0c02> can't assign resources (memory)
 unknown: <PNP0c02> can't assign resources (memory)
 unknown: <INT0800> can't assign resources (memory)
 Timecounters tick every 1.000 msec
 usbus0: 12Mbps Full Speed USB v1.0
 usbus1: 12Mbps Full Speed USB v1.0
 usbus2: 12Mbps Full Speed USB v1.0
 usbus3: 480Mbps High Speed USB v2.0
 usbus4: 12Mbps Full Speed USB v1.0
 usbus5: 12Mbps Full Speed USB v1.0
 usbus6: 12Mbps Full Speed USB v1.0
 usbus7: 480Mbps High Speed USB v2.0
 ugen0.1: <Intel> at usbus0
 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ugen1.1: <Intel> at usbus1
 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 ugen2.1: <Intel> at usbus2
 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
 ugen3.1: <Intel> at usbus3
 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
 ugen4.1: <Intel> at usbus4
 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 ugen5.1: <Intel> at usbus5
 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 ugen6.1: <Intel> at usbus6
 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
 ugen7.1: <Intel> at usbus7
 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
 ad4: 152627MB <Seagate ST9160827AS 3.CMG> at ata2-master SATA150
 acd0: DVDR <HL-DT-ST DVDRAM GSA-T50N/RV06> at ata3-master SATA150
 hdac0: HDA Codec #0: Intel G45 HDMI
 hdac0: HDA Codec #2: Conexant CX20561 (Hermosa)
 pcm0: <HDA Intel G45 HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
 pcm1: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 2 nid 1 on hdac=
 0
 pcm2: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 2 nid 1 on hdac=
 0
 SMP: AP CPU #1 Launched!
 WARNING: WITNESS option enabled, expect reduced performance.
 uhub0: 2 ports with 2 removable, self powered
 uhub1: 2 ports with 2 removable, self powered
 uhub2: 2 ports with 2 removable, self powered
 uhub4: 2 ports with 2 removable, self powered
 uhub5: 2 ports with 2 removable, self powered
 uhub6: 2 ports with 2 removable, self powered
 Root mount waiting for: usbus7 usbus3
 Root mount waiting for: usbus7 usbus3
 Root mount waiting for: usbus7 usbus3
 uhub3: 6 ports with 6 removable, self powered
 uhub7: 6 ports with 6 removable, self powered
 ugen7.2: <Image Processor> at usbus7
 Trying to mount root from ufs:/dev/ad4s1a
 bge0: link state changed to UP
 ndis0: <Broadcom 802.11g Network Adapter> mem 0xf4700000-0xf4703fff
 irq 18 at device 0.0 on pci4
 ndis0: [ITHREAD]
 ndis0: NDIS API version: 5.1
 wlan0: Ethernet address: 00:21:00:e7:75:20
 drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
 info: [drm] MSI enabled 1 message(s)
 vgapci0: child drm0 requested pci_enable_busmaster
 info: [drm] AGP at 0xd0000000 256MB
 info: [drm] Initialized i915 1.6.0 20080730
 drm0: [ITHREAD]
 lock order reversal:
  1st 0xc55da9b0 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2559
  2nd 0xc64cc800 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:285
 KDB: stack backtrace:
 db_trace_self_wrapper(c0c74987,e8ab385c,c08c0f75,c08b1cfb,c0c7785a,...)
 at db_trace_self_wrapper+0x26
 kdb_backtrace(c08b1cfb,c0c7785a,c592bfc8,c592f290,e8ab38b8,...) at
 kdb_backtrace+0x29
 _witness_debugger(c0c7785a,c64cc800,c0c98a02,c592f290,c0c9869b,...) at
 _witness_debugger+0x25
 witness_checkorder(c64cc800,9,c0c9869b,11d,0,...) at witness_checkorder+0x8=
 39
 _sx_xlock(c64cc800,0,c0c9869b,11d,c6db4910,...) at _sx_xlock+0x85
 ufsdirhash_acquire(c55da950,e8ab39d0,24,dc124800,e8ab3988,...) at
 ufsdirhash_acquire+0x35
 ufsdirhash_add(c6db4910,e8ab39d0,800,e8ab3974,e8ab3978,...) at
 ufsdirhash_add+0x13
 ufs_direnter(c6dc210c,c6dc2000,e8ab39d0,e8ab3bd8,0,...) at ufs_direnter+0x7=
 29
 ufs_makeinode(e8ab3bd8,e8ab3b44,e8ab3c00,e8ab3b18,c0bbe3d5,...) at
 ufs_makeinode+0x508
 ufs_create(e8ab3c00,e8ab3c14,e8ab3b44,e8ab3b44,0,...) at ufs_create+0x30
 VOP_CREATE_APV(c0d78220,e8ab3c00,e8ab3bd8,e8ab3b44,c5fa21f0,...) at
 VOP_CREATE_APV+0xa5
 uipc_bind(c6dc6b44,c649cdc0,c6d356c0,e8ab3c60,c08ece62,...) at uipc_bind+0x=
 32f
 sobind(c6dc6b44,c649cdc0,c6d356c0,c649cdc0,c62142a0,...) at sobind+0x23
 kern_bind(c6d356c0,c,c649cdc0,c649cdc0,2811bdac,...) at kern_bind+0xc2
 bind(c6d356c0,e8ab3cf8,c,c0c78305,c0d57460,...) at bind+0x46
 syscall(e8ab3d38) at syscall+0x2a3
 Xint0x80_syscall() at Xint0x80_syscall+0x20
 --- syscall (104, FreeBSD ELF32, bind), eip =3D 0x285998bf, esp =3D
 0xbfbfe5dc, ebp =3D 0xbfbfe628 ---
 acquiring duplicate lock of same type: "ftlk"
  1st ftlk @ /usr/src/sys/modules/linux/../../compat/linux/linux_futex.c:177
  2nd ftlk @ /usr/src/sys/modules/linux/../../compat/linux/linux_futex.c:203
 KDB: stack backtrace:
 db_trace_self_wrapper(c0c74987,e8522b58,c08c0f75,c08b1cfb,c0c7774d,...)
 at db_trace_self_wrapper+0x26
 kdb_backtrace(c08b1cfb,c0c7774d,c11258b7,c592fc50,e8522bb4,...) at
 kdb_backtrace+0x29
 _witness_debugger(c0c7774d,c11258f3,c11258b7,cb,0,...) at _witness_debugger=
 +0x25
 witness_checkorder(c6060340,9,c11258b7,cb,0,...) at witness_checkorder+0x46=
 9
 _sx_xlock(c6060340,0,c11258b7,cb,0,...) at _sx_xlock+0x85
 futex_get0(c0ad7d2c,c1891700,c6df99d8,0,e8522c48,...) at futex_get0+0x116
 linux_sys_futex(c62c5b40,e8522cf8,e8522d18,e8522d1c,c1128f40,...) at
 linux_sys_futex+0x6f
 syscall(e8522d38) at syscall+0x2a3
 Xint0x80_syscall() at Xint0x80_syscall+0x20
 --- syscall (240, Linux ELF, linux_sys_futex), eip =3D 0x28799533, esp =3D
 0xbfbfbfcc, ebp =3D 0x4000001 ---

 On Sun, Sep 13, 2009 at 7:56 AM,  <linimon at freebsd.org> wrote:
 > Synopsis: mouse fails with ACPI enabled
 >
 > State-Changed-From-To: open->feedback
 > State-Changed-By: linimon
 > State-Changed-When: Sun Sep 13 04:55:56 UTC 2009
 > State-Changed-Why:
 > You need to give us more information.  Is the mouse USB?  What type of
 > system?  A dmesg would be useful, as well as the machine manufacturer.
 >
 > http://www.freebsd.org/cgi/query-pr.cgi?pr=3D138771
 >

 On Sat, Sep 12, 2009 at 10:00 PM,  <FreeBSD-gnats-submit at freebsd.org> wrote=
 :
 > Thank you very much for your problem report.
 > It has the internal identification `bin/138771'.
 > The individual assigned to look at your
 > report is: freebsd-bugs.
 >
 > You can access the state of your problem report at any time
 > via this link:
 >
 > http://www.freebsd.org/cgi/query-pr.cgi?pr=3D138771
 >
 >>Category: =C2=A0 =C2=A0 =C2=A0 bin
 >>Responsible: =C2=A0 =C2=A0freebsd-bugs
 >>Synopsis: =C2=A0 =C2=A0 =C2=A0 mouse fails with ACPI enabled
 >>Arrival-Date: =C2=A0 Sat Sep 12 19:00:18 UTC 2009
 >