misc/139598: CAM reports "xptioctl: put "device pass" in your
kernel config file" even when already present
Warren Block
wblock at wonkity.com
Wed Oct 14 12:10:03 UTC 2009
>Number: 139598
>Category: misc
>Synopsis: CAM reports "xptioctl: put "device pass" in your kernel config file" even when already present
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Oct 14 12:10:02 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Warren Block
>Release: 8.0-RC1
>Organization:
>Environment:
FreeBSD lightning 8.0-RC1 FreeBSD 8.0-RC1 #4: Wed Oct 14 04:51:37 MDT 2009 root at lightning:/usr/obj/usr/src/sys/LIGHTNING i386
>Description:
CAM error message is wrong, reporting "device pass" is not present in the kernel even though the device is present.
kernel config:
----------
include GENERIC
ident LIGHTNING
nocpu I486_CPU
nocpu I586_CPU
nooptions INET6
nooptions WITNESS
nooptions INVARIANTS
----------
"device pass" is included in GENERIC. Adding it explicitly to the config file makes no difference.
The device is an IDE DVDRW drive via a USB-to-IDE adapter. This error may occur with other types of devices using CAM, like USB memory card readers.
/var/log/messages:
ugen3.3: <vendor 0x059b> at usbus3
umass0: <vendor 0x059b USB 2.0 Storage Device, class 0/0, rev 2.00/1.03, addr 3> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:1:0:-1: Attached to scbus1
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
xptioctl: pass driver is not in the kernel
xptioctl: put "device pass" in your kernel config file
xptioctl: pass driver is not in the kernel
xptioctl: put "device pass" in your kernel config file
xptioctl: pass driver is not in the kernel
xptioctl: put "device pass" in your kernel config file
xptioctl: pass driver is not in the kernel
xptioctl: put "device pass" in your kernel config file
xptioctl: pass driver is not in the kernel
xptioctl: put "device pass" in your kernel config file
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <ATAPI DVD A DH20A4P 9P59> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
>How-To-Repeat:
Connect external USB DVD drive or other device that uses CAM. Check log messages. Verify that kernel already has "device pass" defined.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list