kern/140564: Problem with Intel(R) PRO/Wireless 3945ABG

Leonardo Santagostini lsantagostini at gmail.com
Sun Nov 15 04:30:01 UTC 2009


>Number:         140564
>Category:       kern
>Synopsis:       Problem with Intel(R) PRO/Wireless 3945ABG
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sun Nov 15 04:30:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator:     Leonardo Santagostini
>Release:        FreeBSD 8.0-RC3
>Organization:
none
>Environment:
ntbacer# uname -a
FreeBSD ntbacer.localdomain 8.0-RC3 FreeBSD 8.0-RC3 #0: Tue Nov 10 07:50:36 UTC 2009     root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386
ntbacer# 
>Description:
When doing ifconfig wpi0 up then the following error appair:

ntbacer# ifconfig wpi0 up

wpi0: timeout resetting Tx ring 1
wpi0: timeout resetting Tx ring 3
wpi0: timeout resetting Tx ring 4
wpi0: timeout waiting for adapter to initialize
wpi0: A problem occurred loading the firmware to the driver

ntbacer# ifconfig
wpi0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
	ether 00:1f:3c:31:94:3e
	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
	status: no carrier

-------
/boot/loader.conf:
ntbacer# cat /boot/loader.conf
if_wpi_load="YES"
wlan_load="YES"
firmware_load="YES"
wpifw_load="YES"
snd_hda_load="YES"
legal.intel_ipw.license_ack=1

-------
/etc/rc.conf
ntbacer# cat /etc/rc.conf 
keymap="us.iso"
ifconfig_bge0="DHCP"
hostname="ntbacer.localdomain"
moused_enable="YES"
ifconfig_wpi0="WPA DHCP"
gnome_enable="YES"

-------
ntbacer# cat /etc/wpa_supplicant.conf 
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
fast_reauth=1
eapol_version=1

network={
  ssid="Wifi Leo"
  psk="encrypted passwd"
  scan_ssid=1
  proto=WPA2
  key_mgmt=WPA-PSK
}

--------
system boot with ACPI disabled, ACPI enabled cause system hang at boot time.

--------
Machine:
Acer Aspire 5920

--------
Nov 15 01:10:49 ntbacer syslogd: kernel boot file is /boot/kernel/kernel
Nov 15 01:10:49 ntbacer kernel: Copyright (c) 1992-2009 The FreeBSD Project.
Nov 15 01:10:49 ntbacer kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Nov 15 01:10:49 ntbacer kernel: The Regents of the University of California. All rights reserved.
Nov 15 01:10:49 ntbacer kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Nov 15 01:10:49 ntbacer kernel: FreeBSD 8.0-RC3 #0: Tue Nov 10 07:50:36 UTC 2009
Nov 15 01:10:49 ntbacer kernel: root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Nov 15 01:10:49 ntbacer kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Nov 15 01:10:49 ntbacer kernel: CPU: Intel(R) Core(TM)2 Duo CPU     T5550  @ 1.83GHz (1833.47-MHz 686-class CPU)
Nov 15 01:10:49 ntbacer kernel: Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
Nov 15 01:10:49 ntbacer kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Nov 15 01:10:49 ntbacer kernel: Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
Nov 15 01:10:49 ntbacer kernel: AMD Features=0x20100000<NX,LM>
Nov 15 01:10:49 ntbacer kernel: AMD Features2=0x1<LAHF>
Nov 15 01:10:49 ntbacer kernel: TSC: P-state invariant
Nov 15 01:10:49 ntbacer kernel: real memory  = 2147483648 (2048 MB)
Nov 15 01:10:49 ntbacer kernel: avail memory = 2077458432 (1981 MB)
Nov 15 01:10:49 ntbacer kernel: MPTable: <INTEL    S. Rosa CRB >
Nov 15 01:10:49 ntbacer kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Nov 15 01:10:49 ntbacer kernel: FreeBSD/SMP: 1 package(s) x 2 core(s)
Nov 15 01:10:49 ntbacer kernel: cpu0 (BSP): APIC ID:  0
Nov 15 01:10:49 ntbacer kernel: cpu1 (AP): APIC ID:  1
Nov 15 01:10:49 ntbacer kernel: ioapic0: Assuming intbase of 0
Nov 15 01:10:49 ntbacer kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Nov 15 01:10:49 ntbacer kernel: kbd1 at kbdmux0
Nov 15 01:10:49 ntbacer kernel: pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
Nov 15 01:10:49 ntbacer kernel: pci0: <PCI bus> on pcib0
Nov 15 01:10:49 ntbacer kernel: vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0000000-0xf00fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
Nov 15 01:10:49 ntbacer kernel: agp0: <Intel GM965 SVGA controller> on vgapci0
Nov 15 01:10:49 ntbacer kernel: agp0: detected 7676k stolen memory
Nov 15 01:10:49 ntbacer kernel: agp0: aperture size is 256M
Nov 15 01:10:49 ntbacer kernel: vgapci1: <VGA-compatible display> mem 0xf0100000-0xf01fffff at device 2.1 on pci0
Nov 15 01:10:49 ntbacer kernel: uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1820-0x183f irq 16 at device 26.0 on pci0
Nov 15 01:10:49 ntbacer kernel: uhci0: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: uhci0: LegSup = 0x003b
Nov 15 01:10:49 ntbacer kernel: usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
Nov 15 01:10:49 ntbacer kernel: uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1840-0x185f irq 21 at device 26.1 on pci0
Nov 15 01:10:49 ntbacer kernel: uhci1: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: uhci1: LegSup = 0x0010
Nov 15 01:10:49 ntbacer kernel: usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
Nov 15 01:10:49 ntbacer kernel: ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf0704000-0xf07043ff irq 18 at device 26.7 on pci0
Nov 15 01:10:49 ntbacer kernel: ehci0: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: usbus2: EHCI version 1.0
Nov 15 01:10:49 ntbacer kernel: usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
Nov 15 01:10:49 ntbacer kernel: hdac0: <Intel 82801H High Definition Audio Controller> mem 0xf0500000-0xf0503fff irq 22 at device 27.0 on pci0
Nov 15 01:10:49 ntbacer kernel: hdac0: HDA Driver Revision: 20090624_0136
Nov 15 01:10:49 ntbacer kernel: hdac0: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: pcib1: <PCI-PCI bridge> irq 17 at device 28.0 on pci0
Nov 15 01:10:49 ntbacer kernel: pci2: <PCI bus> on pcib1
Nov 15 01:10:49 ntbacer kernel: pcib2: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
Nov 15 01:10:49 ntbacer kernel: pci6: <PCI bus> on pcib2
Nov 15 01:10:49 ntbacer kernel: wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xf0300000-0xf0300fff irq 17 at device 0.0 on pci6
Nov 15 01:10:49 ntbacer kernel: wpi0: Driver Revision 20071127
Nov 15 01:10:49 ntbacer kernel: wpi0: Hardware Revision (0x1)
Nov 15 01:10:49 ntbacer kernel: adding chan 1 (2412MHz) flags=0x2b maxpwr=15 passive=0, offset 2
Nov 15 01:10:49 ntbacer kernel: adding chan 2 (2417MHz) flags=0x2b maxpwr=15 passive=0, offset 4
Nov 15 01:10:49 ntbacer kernel: adding chan 3 (2422MHz) flags=0x2b maxpwr=15 passive=0, offset 6
Nov 15 01:10:49 ntbacer kernel: adding chan 4 (2427MHz) flags=0x2b maxpwr=15 passive=0, offset 8
Nov 15 01:10:49 ntbacer kernel: adding chan 5 (2432MHz) flags=0x2b maxpwr=15 passive=0, offset 10
Nov 15 01:10:49 ntbacer kernel: adding chan 6 (2437MHz) flags=0x2b maxpwr=15 passive=0, offset 12
Nov 15 01:10:49 ntbacer kernel: adding chan 7 (2442MHz) flags=0x2b maxpwr=15 passive=0, offset 14
Nov 15 01:10:49 ntbacer kernel: adding chan 8 (2447MHz) flags=0x2b maxpwr=15 passive=0, offset 16
Nov 15 01:10:49 ntbacer kernel: adding chan 9 (2452MHz) flags=0x2b maxpwr=15 passive=0, offset 18
Nov 15 01:10:49 ntbacer kernel: adding chan 10 (2457MHz) flags=0x2b maxpwr=15 passive=0, offset 20
Nov 15 01:10:49 ntbacer kernel: adding chan 11 (2462MHz) flags=0x2b maxpwr=15 passive=0, offset 22
Nov 15 01:10:49 ntbacer kernel: adding chan 12 (2467MHz) flags=0x21 maxpwr=15 passive=1, offset 24
Nov 15 01:10:49 ntbacer kernel: adding chan 13 (2472MHz) flags=0x21 maxpwr=15 passive=1, offset 26
Nov 15 01:10:49 ntbacer kernel: adding chan 34 (5170MHz) flags=0x21 maxpwr=15 passive=1, offset 27
Nov 15 01:10:49 ntbacer kernel: adding chan 36 (5180MHz) flags=0xab maxpwr=15 passive=0, offset 28
Nov 15 01:10:49 ntbacer kernel: adding chan 38 (5190MHz) flags=0x21 maxpwr=15 passive=1, offset 29
Nov 15 01:10:49 ntbacer kernel: adding chan 40 (5200MHz) flags=0xab maxpwr=15 passive=0, offset 30
Nov 15 01:10:49 ntbacer kernel: adding chan 42 (5210MHz) flags=0x21 maxpwr=15 passive=1, offset 31
Nov 15 01:10:49 ntbacer kernel: adding chan 44 (5220MHz) flags=0xab maxpwr=15 passive=0, offset 32
Nov 15 01:10:49 ntbacer kernel: adding chan 46 (5230MHz) flags=0x21 maxpwr=15 passive=1, offset 33
Nov 15 01:10:49 ntbacer kernel: adding chan 48 (5240MHz) flags=0xab maxpwr=15 passive=0, offset 34
Nov 15 01:10:49 ntbacer kernel: adding chan 52 (5260MHz) flags=0xb1 maxpwr=15 passive=1, offset 35
Nov 15 01:10:49 ntbacer kernel: adding chan 56 (5280MHz) flags=0xb1 maxpwr=15 passive=1, offset 36
Nov 15 01:10:49 ntbacer kernel: adding chan 60 (5300MHz) flags=0xb1 maxpwr=15 passive=1, offset 37
Nov 15 01:10:49 ntbacer kernel: adding chan 64 (5320MHz) flags=0xb1 maxpwr=15 passive=1, offset 38
Nov 15 01:10:49 ntbacer kernel: adding chan 100 (5500MHz) flags=0xb1 maxpwr=16 passive=1, offset 39
Nov 15 01:10:49 ntbacer kernel: adding chan 104 (5520MHz) flags=0xb1 maxpwr=16 passive=1, offset 40
Nov 15 01:10:49 ntbacer kernel: adding chan 108 (5540MHz) flags=0xb1 maxpwr=16 passive=1, offset 41
Nov 15 01:10:49 ntbacer kernel: adding chan 112 (5560MHz) flags=0xb1 maxpwr=16 passive=1, offset 42
Nov 15 01:10:49 ntbacer kernel: adding chan 116 (5580MHz) flags=0xb1 maxpwr=16 passive=1, offset 43
Nov 15 01:10:49 ntbacer kernel: adding chan 120 (5600MHz) flags=0xb1 maxpwr=16 passive=1, offset 44
Nov 15 01:10:49 ntbacer kernel: adding chan 124 (5620MHz) flags=0xb1 maxpwr=16 passive=1, offset 45
Nov 15 01:10:49 ntbacer kernel: adding chan 128 (5640MHz) flags=0xb1 maxpwr=16 passive=1, offset 46
Nov 15 01:10:49 ntbacer kernel: adding chan 132 (5660MHz) flags=0xb1 maxpwr=16 passive=1, offset 47
Nov 15 01:10:49 ntbacer kernel: adding chan 136 (5680MHz) flags=0xb1 maxpwr=16 passive=1, offset 48
Nov 15 01:10:49 ntbacer kernel: adding chan 140 (5700MHz) flags=0xb1 maxpwr=16 passive=1, offset 49
Nov 15 01:10:49 ntbacer kernel: power group 0: chan=1 maxpwr=48 temp=-182
Nov 15 01:10:49 ntbacer kernel: sample 0: index=13 power=44
Nov 15 01:10:49 ntbacer kernel: sample 1: index=29 power=31
Nov 15 01:10:49 ntbacer kernel: sample 2: index=47 power=11
Nov 15 01:10:49 ntbacer kernel: sample 3: index=58 power=0
Nov 15 01:10:49 ntbacer kernel: sample 4: index=77 power=-18
Nov 15 01:10:49 ntbacer kernel: power group 1: chan=44 maxpwr=50 temp=-186
Nov 15 01:10:49 ntbacer kernel: sample 0: index=12 power=40
Nov 15 01:10:49 ntbacer kernel: sample 1: index=19 power=31
Nov 15 01:10:49 ntbacer kernel: sample 2: index=32 power=17
Nov 15 01:10:49 ntbacer kernel: sample 3: index=43 power=7
Nov 15 01:10:49 ntbacer kernel: sample 4: index=77 power=-25
Nov 15 01:10:49 ntbacer kernel: power group 2: chan=64 maxpwr=50 temp=-185
Nov 15 01:10:49 ntbacer kernel: sample 0: index=12 power=43
Nov 15 01:10:49 ntbacer kernel: sample 1: index=20 power=34
Nov 15 01:10:49 ntbacer kernel: sample 2: index=33 power=21
Nov 15 01:10:49 ntbacer kernel: sample 3: index=44 power=11
Nov 15 01:10:49 ntbacer kernel: sample 4: index=77 power=-20
Nov 15 01:10:49 ntbacer kernel: power group 3: chan=116 maxpwr=48 temp=-184
Nov 15 01:10:49 ntbacer kernel: sample 0: index=12 power=40
Nov 15 01:10:49 ntbacer kernel: sample 1: index=20 power=31
Nov 15 01:10:49 ntbacer kernel: sample 2: index=36 power=15
Nov 15 01:10:49 ntbacer kernel: sample 3: index=48 power=4
Nov 15 01:10:49 ntbacer kernel: sample 4: index=77 power=-23
Nov 15 01:10:49 ntbacer kernel: power group 4: chan=153 maxpwr=46 temp=-183
Nov 15 01:10:49 ntbacer kernel: sample 0: index=10 power=39
Nov 15 01:10:49 ntbacer kernel: sample 1: index=20 power=29
Nov 15 01:10:49 ntbacer kernel: sample 2: index=32 power=17
Nov 15 01:10:49 ntbacer kernel: sample 3: index=42 power=9
Nov 15 01:10:49 ntbacer kernel: sample 4: index=77 power=-23
Nov 15 01:10:49 ntbacer kernel: wpi0: Regulatory Domain: MoW2
Nov 15 01:10:49 ntbacer kernel: wpi0: Hardware Type: B
Nov 15 01:10:49 ntbacer kernel: wpi0: Hardware Revision: ?
Nov 15 01:10:49 ntbacer kernel: wpi0: SKU does support 802.11a
Nov 15 01:10:49 ntbacer kernel: wpi0: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: pcib3: <PCI-PCI bridge> irq 16 at device 28.5 on pci0
Nov 15 01:10:49 ntbacer kernel: pci8: <PCI bus> on pcib3
Nov 15 01:10:49 ntbacer kernel: bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> mem 0xf0200000-0xf020ffff irq 17 at device 0.0 on pci8
Nov 15 01:10:49 ntbacer kernel: miibus0: <MII bus> on bge0
Nov 15 01:10:49 ntbacer kernel: brgphy0: <BCM5787 10/100/1000baseTX PHY> PHY 1 on miibus0
Nov 15 01:10:49 ntbacer kernel: brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Nov 15 01:10:49 ntbacer kernel: bge0: Ethernet address: 00:1e:68:47:55:b3
Nov 15 01:10:49 ntbacer kernel: bge0: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1860-0x187f irq 23 at device 29.0 on pci0
Nov 15 01:10:49 ntbacer kernel: uhci2: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: uhci2: LegSup = 0x003b
Nov 15 01:10:49 ntbacer kernel: usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
Nov 15 01:10:49 ntbacer kernel: uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1880-0x189f irq 19 at device 29.1 on pci0
Nov 15 01:10:49 ntbacer kernel: uhci3: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: uhci3: LegSup = 0x0010
Nov 15 01:10:49 ntbacer kernel: usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
Nov 15 01:10:49 ntbacer kernel: uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0
Nov 15 01:10:49 ntbacer kernel: uhci4: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: uhci4: LegSup = 0x0010
Nov 15 01:10:49 ntbacer kernel: usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
Nov 15 01:10:49 ntbacer kernel: ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf0704400-0xf07047ff irq 23 at device 29.7 on pci0
Nov 15 01:10:49 ntbacer kernel: ehci1: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: usbus6: EHCI version 1.0
Nov 15 01:10:49 ntbacer kernel: usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
Nov 15 01:10:49 ntbacer kernel: pcib4: <PCI-PCI bridge> at device 30.0 on pci0
Nov 15 01:10:49 ntbacer kernel: pci10: <PCI bus> on pcib4
Nov 15 01:10:49 ntbacer kernel: fwohci0: <1394 Open Host Controller Interface> mem 0xf0400000-0xf04007ff at device 9.0 on pci10
Nov 15 01:10:49 ntbacer kernel: pcib0: unable to route slot 30 INTB
Nov 15 01:10:49 ntbacer kernel: fwohci0: Could not allocate irq
Nov 15 01:10:49 ntbacer kernel: device_attach: fwohci0 attach returned 6
Nov 15 01:10:49 ntbacer kernel: pci10: <base peripheral, SD host controller> at device 9.1 (no driver attached)
Nov 15 01:10:49 ntbacer kernel: pci10: <base peripheral> at device 9.2 (no driver attached)
Nov 15 01:10:49 ntbacer kernel: pci10: <base peripheral> at device 9.3 (no driver attached)
Nov 15 01:10:49 ntbacer kernel: pci10: <base peripheral> at device 9.4 (no driver attached)
Nov 15 01:10:49 ntbacer kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Nov 15 01:10:49 ntbacer kernel: isa0: <ISA bus> on isab0
Nov 15 01:10:49 ntbacer kernel: atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
Nov 15 01:10:49 ntbacer kernel: ata0: <ATA channel 0> on atapci0
Nov 15 01:10:49 ntbacer kernel: ata0: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: atapci1: <Intel ICH8M SATA300 controller> port 0x1c00-0x1c07,0x18f4-0x18f7,0x18f8-0x18ff,0x18f0-0x18f3,0x18e0-0x18ef,0x18d0-0x18df irq 19 at device 31.2 on pci0
Nov 15 01:10:49 ntbacer kernel: atapci1: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: ata2: <ATA channel 0> on atapci1
Nov 15 01:10:49 ntbacer kernel: ata2: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: ata3: <ATA channel 1> on atapci1
Nov 15 01:10:49 ntbacer kernel: ata3: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
Nov 15 01:10:49 ntbacer kernel: cpu0 on motherboard
Nov 15 01:10:49 ntbacer kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
Nov 15 01:10:49 ntbacer kernel: est: CPU supports Enhanced Speedstep, but is not recognized.
Nov 15 01:10:49 ntbacer kernel: est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
Nov 15 01:10:49 ntbacer kernel: device_attach: est0 attach returned 6
Nov 15 01:10:49 ntbacer kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
Nov 15 01:10:49 ntbacer kernel: cpu1 on motherboard
Nov 15 01:10:49 ntbacer kernel: est1: <Enhanced SpeedStep Frequency Control> on cpu1
Nov 15 01:10:49 ntbacer kernel: est: CPU supports Enhanced Speedstep, but is not recognized.
Nov 15 01:10:49 ntbacer kernel: est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
Nov 15 01:10:49 ntbacer kernel: device_attach: est1 attach returned 6
Nov 15 01:10:49 ntbacer kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1
Nov 15 01:10:49 ntbacer kernel: pmtimer0 on isa0
Nov 15 01:10:49 ntbacer kernel: unknown: <PNP0c01> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
Nov 15 01:10:49 ntbacer kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
Nov 15 01:10:49 ntbacer kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Nov 15 01:10:49 ntbacer kernel: kbd0 at atkbd0
Nov 15 01:10:49 ntbacer kernel: atkbd0: [GIANT-LOCKED]
Nov 15 01:10:49 ntbacer kernel: atkbd0: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: unknown: <PNP0c02> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: unknown: <PNP0c02> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: unknown: <INT0800> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: unknown: <PNP0c02> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Nov 15 01:10:49 ntbacer kernel: psm0: [GIANT-LOCKED]
Nov 15 01:10:49 ntbacer kernel: psm0: [ITHREAD]
Nov 15 01:10:49 ntbacer kernel: psm0: model Generic PS/2 mouse, device ID 0
Nov 15 01:10:49 ntbacer kernel: orm0: <ISA Option ROM> at iomem 0xe0000-0xe17ff pnpid ORM0000 on isa0
Nov 15 01:10:49 ntbacer kernel: sc0: <System console> at flags 0x100 on isa0
Nov 15 01:10:49 ntbacer kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Nov 15 01:10:49 ntbacer kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Nov 15 01:10:49 ntbacer kernel: ppc0: parallel port not found.
Nov 15 01:10:49 ntbacer kernel: unknown: <PNP0c01> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: unknown: <PNP0c02> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: unknown: <PNP0c02> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: unknown: <INT0800> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: unknown: <PNP0c02> can't assign resources (memory)
Nov 15 01:10:49 ntbacer kernel: Timecounters tick every 1.000 msec
Nov 15 01:10:49 ntbacer kernel: usbus0: 12Mbps Full Speed USB v1.0
Nov 15 01:10:49 ntbacer kernel: usbus1: 12Mbps Full Speed USB v1.0
Nov 15 01:10:49 ntbacer kernel: usbus2: 480Mbps High Speed USB v2.0
Nov 15 01:10:49 ntbacer kernel: usbus3: 12Mbps Full Speed USB v1.0
Nov 15 01:10:49 ntbacer kernel: usbus4: 12Mbps Full Speed USB v1.0
Nov 15 01:10:49 ntbacer kernel: usbus5: 12Mbps Full Speed USB v1.0
Nov 15 01:10:49 ntbacer kernel: usbus6: 480Mbps High Speed USB v2.0
Nov 15 01:10:49 ntbacer kernel: ugen0.1: <Intel> at usbus0
Nov 15 01:10:49 ntbacer kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Nov 15 01:10:49 ntbacer kernel: ugen1.1: <Intel> at usbus1
Nov 15 01:10:49 ntbacer kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Nov 15 01:10:49 ntbacer kernel: ugen2.1: <Intel> at usbus2
Nov 15 01:10:49 ntbacer kernel: uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
Nov 15 01:10:49 ntbacer kernel: ugen3.1: <Intel> at usbus3
Nov 15 01:10:49 ntbacer kernel: uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
Nov 15 01:10:49 ntbacer kernel: ugen4.1: <Intel> at usbus4
Nov 15 01:10:49 ntbacer kernel: uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
Nov 15 01:10:49 ntbacer kernel: ugen5.1: <Intel> at usbus5
Nov 15 01:10:49 ntbacer kernel: uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
Nov 15 01:10:49 ntbacer kernel: ugen6.1: <Intel> at usbus6
Nov 15 01:10:49 ntbacer kernel: uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
Nov 15 01:10:49 ntbacer kernel: acd0: DVDR <HL-DT-ST DVDRAM GSA-T40N/JP01> at ata0-master UDMA33
Nov 15 01:10:49 ntbacer kernel: ad4: 152627MB <SAMSUNG HM160JI AD100-16> at ata2-master SATA150
Nov 15 01:10:49 ntbacer kernel: hdac0: HDA Codec #0: Realtek ALC888
Nov 15 01:10:49 ntbacer kernel: hdac0: HDA Codec #1: Conexant (Unknown)
Nov 15 01:10:49 ntbacer kernel: pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
Nov 15 01:10:49 ntbacer kernel: pcm1: <HDA Realtek ALC888 PCM #1 Digital> at cad 0 nid 1 on hdac0
Nov 15 01:10:49 ntbacer kernel: pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac0
Nov 15 01:10:49 ntbacer kernel: SMP: AP CPU #1 Launched!
Nov 15 01:10:49 ntbacer kernel: uhub0: 2 ports with 2 removable, self powered
Nov 15 01:10:49 ntbacer kernel: uhub1: 2 ports with 2 removable, self powered
Nov 15 01:10:49 ntbacer kernel: uhub3: 2 ports with 2 removable, self powered
Nov 15 01:10:49 ntbacer kernel: uhub4: 2 ports with 2 removable, self powered
Nov 15 01:10:49 ntbacer kernel: uhub5: 2 ports with 2 removable, self powered
Nov 15 01:10:49 ntbacer kernel: uhub2: 4 ports with 4 removable, self powered
Nov 15 01:10:49 ntbacer kernel: uhub6: 6 ports with 6 removable, self powered
Nov 15 01:10:49 ntbacer kernel: ugen2.2: <SuYin> at usbus2
Nov 15 01:10:49 ntbacer kernel: Trying to mount root from ufs:/dev/ad4s1a
Nov 15 01:10:50 ntbacer kernel: bge0: link state changed to UP
Nov 15 01:10:50 ntbacer root: /etc/rc: WARNING: $dbus_enable is not set properly - see rc.conf(5).
Nov 15 01:10:50 ntbacer dhclient: New IP Address (bge0): 192.168.1.102
Nov 15 01:10:50 ntbacer dhclient: New Subnet Mask (bge0): 255.255.255.0
Nov 15 01:10:50 ntbacer dhclient: New Broadcast Address (bge0): 192.168.1.255
Nov 15 01:10:50 ntbacer dhclient: New Routers (bge0): 192.168.1.1
Nov 15 01:10:51 ntbacer avahi-daemon[972]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Nov 15 01:10:58 ntbacer kernel: drm0: <Intel i965GM> on vgapci0
Nov 15 01:10:58 ntbacer kernel: info: [drm] MSI enabled 1 message(s)
Nov 15 01:10:58 ntbacer kernel: vgapci0: child drm0 requested pci_enable_busmaster
Nov 15 01:10:58 ntbacer kernel: info: [drm] AGP at 0xd0000000 256MB
Nov 15 01:10:58 ntbacer kernel: info: [drm] Initialized i915 1.6.0 20080730
Nov 15 01:10:59 ntbacer kernel: drm0: [ITHREAD]
Nov 15 01:11:16 ntbacer gnome-session[1173]: WARNING: Application 'metacity.desktop' failed to register before timeout
Nov 15 01:11:17 ntbacer gdm-simple-greeter[1185]: WARNING: Failed to load '/share/xml/iso-codes/iso_639.xml': Failed to open file '/share/xml/iso-codes/iso_639.xml': No such file or directory 
Nov 15 01:11:17 ntbacer gdm-simple-greeter[1185]: WARNING: Failed to load '/share/xml/iso-codes/iso_3166.xml': Failed to open file '/share/xml/iso-codes/iso_3166.xml': No such file or directory 
Nov 15 01:11:41 ntbacer gnome-session[1212]: WARNING: Application 'metacity.desktop' failed to register before timeout
Nov 15 01:11:43 ntbacer pulseaudio[1259]: pid.c: Stale PID file, overwriting.
Nov 15 01:11:43 ntbacer pulseaudio[1259]: module.c: module-detect is deprecated: Please use module-udev-detect instead of module-detect!
Nov 15 01:11:43 ntbacer pulseaudio[1259]: oss-util.c: '/dev/dsp1.0' doesn't support full duplex
Nov 15 01:11:43 ntbacer pulseaudio[1259]: oss-util.c: '/dev/dsp2.0' doesn't support full duplex
Nov 15 01:13:44 ntbacer wpa_supplicant[1395]: Failed to initialize driver interface
Nov 15 01:13:44 ntbacer root: /etc/rc.d/wpa_supplicant: WARNING: failed to start wpa_supplicant
Nov 15 01:14:03 ntbacer kernel: drm0: [ITHREAD]
Nov 15 01:14:25 ntbacer wpa_supplicant[1518]: Failed to initialize driver interface
Nov 15 01:14:25 ntbacer root: /etc/rc.d/wpa_supplicant: WARNING: failed to start wpa_supplicant
Nov 15 01:14:42 ntbacer kernel: wpi0: timeout resetting Tx ring 1
Nov 15 01:14:42 ntbacer kernel: wpi0: timeout resetting Tx ring 3
Nov 15 01:14:42 ntbacer kernel: wpi0: timeout resetting Tx ring 4
Nov 15 01:14:43 ntbacer kernel: wpi0: timeout waiting for adapter to initialize
Nov 15 01:14:43 ntbacer kernel: wpi0: A problem occurred loading the firmware to the driver
ntbacer# 

>How-To-Repeat:

>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-bugs mailing list