kern/137041: powerd hangs my systems within aprox 15 min when turned on

Thu Jul 23 18:20:02 UTC 2009

>Number:         137041
>Category:       kern
>Synopsis:       powerd hangs my systems within aprox 15 min when turned on
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Jul 23 18:20:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator:     Pawel Pekala
>Release:        FreeBSD 7.2-RELEASE-p2 i386
>Organization:
>Environment:

System: FreeBSD 7.2-RELEASE-p2 #4: Tue Jun 30 20:40:20 CEST 2009
    root at caprica.slowicza.org:/usr/obj/usr/src/sys/MINI

>Description:

I own HP Compaq nx6125 laptop, when I turn on powerd by adding
powerd_enable="YES" to my rc.conf it hangs within 15 min of working 
even when laptop idles. After that I can only reboot machine.

Here's my dmesg output:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p2 #4: Tue Jun 30 20:40:20 CEST 2009
    root at caprica.slowicza.org:/usr/obj/usr/src/sys/MINI
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Sempron(tm) 3100+ (1795.51-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20fc2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xc2500800<SYSCALL,NX,MMX+,FFXSR,3DNow!+,3DNow!>
  AMD Features2=0x1<LAHF>
real memory  = 939327488 (895 MB)
avail memory = 909828096 (867 MB)
kbd1 at kbdmux0
acpi0: <HP 0944> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 37f00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link1: BIOS IRQ 5 for 0.20.INTB is invalid
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci_link1: BIOS IRQ 5 for 1.5.INTA is invalid
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xc0000000-0xcfffffff,0xd0600000-0xd060ffff irq 9 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci16: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci32: <ACPI PCI bus> on pcib3
ohci0: <ATI SB400 USB Controller> mem 0xd0a00000-0xd0a00fff irq 10 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xd0a01000-0xd0a01fff irq 10 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xd0a02000-0xd0a02fff irq 10 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4010-0x401f irq 10 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci_link6: BIOS IRQ 5 for 2.2.INTA is invalid
pci2: <ACPI PCI bus> on pcib4
pci2: <network, ethernet> at device 1.0 (no driver attached)
ndis0: <Broadcom 802.11b/g WLAN> mem 0xd0010000-0xd0011fff irq 11 at device 2.0 on pci2
ndis0: [ITHREAD]
ndis0: NDIS API version: 5.1
ndis0: WARNING: using obsoleted if_watchdog interface
ndis0: Ethernet address: 00:14:a5:a5:3a:0d
pci2: <bridge, PCI-CardBus> at device 4.0 (no driver attached)
pci2: <serial bus, FireWire> at device 4.2 (no driver attached)
pci2: <mass storage> at device 4.3 (no driver attached)
pci2: <base peripheral, SD host controller> at device 4.4 (no driver attached)
pcm0: <ATI IXP 400> mem 0xd0a04000-0xd0a040ff irq 9 at device 20.5 on pci0
pcm0: [ITHREAD]
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ugen0: <vendor 0x08ff Fingerprint Sensor, class 255/255, rev 1.10/6.21, addr 2> on uhub1
Timecounter "TSC" frequency 1795512019 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 57231MB <TOSHIBA MK6025GAS KA201A> at ata0-master UDMA100
acd0: DVDR <MATSHITAUJ-840D/1.02> at ata1-master PIO4
pcm0: <Conexant CX20468-21 AC97 Codec>
GEOM_LABEL: Label for provider ad0s3a is ufsid/44b59a93a631f99b.
GEOM_LABEL: Label for provider ad0s3d is ufsid/44b59a9409328bf2.
GEOM_LABEL: Label for provider ad0s3e is ufsid/44b59a9312c20a3a.
Trying to mount root from ufs:/dev/ad0s3a
GEOM_LABEL: Label ufsid/44b59a93a631f99b removed.
GEOM_LABEL: Label for provider ad0s3a is ufsid/44b59a93a631f99b.
GEOM_LABEL: Label ufsid/44b59a9312c20a3a removed.
GEOM_LABEL: Label for provider ad0s3e is ufsid/44b59a9312c20a3a.
GEOM_LABEL: Label ufsid/44b59a9409328bf2 removed.
GEOM_LABEL: Label for provider ad0s3d is ufsid/44b59a9409328bf2.
GEOM_LABEL: Label ufsid/44b59a93a631f99b removed.
GEOM_LABEL: Label ufsid/44b59a9312c20a3a removed.
GEOM_LABEL: Label ufsid/44b59a9409328bf2 removed.
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata1:0:0:0): CAM Status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI Status: Check Condition
(probe0:ata1:0:0:0): NOT READY asc:3a,0
(probe0:ata1:0:0:0): Medium not present
(probe0:ata1:0:0:0): Unretryable error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJ-840D 1.02> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ndis0: link state changed to DOWN
ndis0: link state changed to UP
drm0: <ATI Radeon XPRESS 200M 5955> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080528
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] Num pipes: 2
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]

>How-To-Repeat:

>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted: