kern/122174: 7.0 panics on amd64 Tyan 2865

[Dieter]

>Number:         122174
>Category:       kern
>Synopsis:       7.0 panics on amd64 Tyan 2865
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Fri Mar 28 02:30:02 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator:     Dieter
>Release:        7.0
>Organization:
>Environment:
amd64 7.0 generic kernel from release iso
>Description:
Attempting to update from 6.2 to 7.0 but always get
a kernel panic.

Tyan Tomcat k8e 2865 mainboard
AMD64
nforce4-ultra

GENERIC amd64 kernel, nothing custom yet.


usable memory = 2134630400 (2035 MB)
avail memory  = 2060079104 (1964 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)

[ off to a bad start, there is no RocketRAID controller ]

acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: could not allocate interrupt
ACPI Exception (evevent-0257): AE_ALREADY_EXISTS, Unable to install System Control Interrupt handler [200
70320]
acpi0: Could not enable ACPI: AE_ALREADY_EXISTS
device_attach: acpi0 attach returned 6
cpu0 on motherboard
powernow0: <Cool`n'Quiet K8> on cpu0
device_attach: powernow0 attach returned 6
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfebff000-0xfebfffff irq 10 at device 2.0 on pci0
ohci0: Could not allocate irq
device_attach: ohci0 attach returned 6
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfebfe000-0xfebfe0ff irq 11 at device 2.1 on pci0
ehci0: Could not allocate irq
device_attach: ehci0 attach returned 6
pci0: <multimedia, audio> at device 4.0 (no driver attached)
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f
at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: unable to allocate interrupt
device_attach: ata0 attach returned 6
ata1: <ATA channel 1> on atapci0
ata1: unable to allocate interrupt
device_attach: ata1 attach returned 6
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0x
cc00-0xcc0f mem 0xfebfb000-0xfebfbfff irq 11 at device 7.0 on pci0
atapci1: unable to map interrupt
device_attach: atapci1 attach returned 6
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0x
b800-0xb80f mem 0xfebfa000-0xfebfafff irq 10 at device 8.0 on pci0
atapci2: unable to map interrupt
device_attach: atapci2 attach returned 6
pcib1: <PCI-PCI bridge> at device 9.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xac00-0xacff mem 0xfc000000-0xfcffffff,0xfdfff000-0xfdffffff irq
12 at device 5.0 on pci1
fwohci0: <VIA Fire II (VT6306)> port 0xa800-0xa87f mem 0xfdffe000-0xfdffe7ff irq 11 at device 6.0 on pci1
fwohci0: Could not allocate irq
device_attach: fwohci0 attach returned 6
pci1: <multimedia, video> at device 7.0 (no driver attached)
pci1: <multimedia> at device 7.2 (no driver attached)
pcib2: <PCI-PCI bridge> at device 8.0 on pci1
pci2: <PCI bus> on pcib2
fwohci1: <NEC uPD72871/2> mem 0xfdeff000-0xfdefffff irq 10 at device 8.0 on pci2
fwohci1: Could not allocate irq
device_attach: fwohci1 attach returned 6
ohci1: <NEC uPD 9210 USB controller> mem 0xfdefe000-0xfdefefff irq 10 at device 9.0 on pci2
ohci1: Could not allocate irq
device_attach: ohci1 attach returned 6
ohci2: <NEC uPD 9210 USB controller> mem 0xfdefd000-0xfdefdfff irq 5 at device 9.1 on pci2
ohci2: Could not allocate irq
device_attach: ohci2 attach returned 6
ehci1: <NEC uPD 720100 USB 2.0 controller> mem 0xfdefc000-0xfdefc0ff irq 11 at device 9.2 on pci2
ehci1: Could not allocate irq
device_attach: ehci1 attach returned 6
pci1: <multimedia, video> at device 9.0 (no driver attached)
pci1: <multimedia> at device 9.2 (no driver attached)
de0: <Digital 21040 Ethernet> port 0xa400-0xa47f mem 0xfdffd000-0xfdffd07f irq 5 at device 10.0 on pci1
de0: Cogent 21040 [10Mb/s] pass 2.4


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0x10
fault code              = supervisor read data, page not present
instruction pointer     = 0x8:0xffffffff8029750e
stack pointer           = 0x10:0xffffffff80bcc600
frame pointer           = 0x10:0xffffff0001253800
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 (swapper)
trap number             = 12
panic: page fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort


I tried both acpi_load=YES and NO in loader.conf.
I tried the various options (safe mode, etc.) at the loader screen,
but always the same panic.

>How-To-Repeat:
Attempt to boot 7.0 amd64 generic kernel on Tyan 2865.
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted: