kern/114213: [ata] optical drive not detected in the 6.x series of FreeBSD/i

wforms at Safe-mail.net wforms at Safe-mail.net
Wed Jan 30 11:30:04 UTC 2008 

The following reply was made to PR kern/114213; it has been noted by GNATS.

From: wforms at Safe-mail.net
To: bug-followup at freebsd.org
Cc:  
Subject: Re: kern/114213: [ata] optical drive not detected in the 6.x series of FreeBSD/i
Date: Wed, 30 Jan 2008 12:29:30 +0100

 I saved the output of dmesg under OpenBSD 4.2 (booting from the OpenBSD install CD). The "otherwise disappearing" optical drives nicely show up in OpenBSD's dmesg. I post it here as it might be helpful to identify our problem.
 
 This is how my old PIII/800 desktop shows up:
 <include>
 OpenBSD 4.2 (RAMDISK_CD) #468: Tue Aug 28 11:02:17 MDT 2007
     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
 cpu0: Intel Pentium III ("GenuineIntel" 686-class) 801 MHz
 cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
 real mem  = 804810752 (767MB)
 avail mem = 771678208 (735MB)
 mainbus0 at root
 bios0 at mainbus0: AT/286+ BIOS, date 07/03/00, BIOS32 rev. 0 @ 0xfb240, SMBIOS rev. 2.2 @ 0xf0800 (43 entries)
 bios0: vendor Award Software International, Inc. version "6.00 PG" date 07/03/2000
 bios0: VIA Technologies, Inc. VT82C692BX
 apm0 at bios0: Power Management spec V1.2
 apm0: flags 70102 dobusy 1 doidle 1
 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb6c8
 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfddf0/144 (7 entries)
 pcibios0: PCI Exclusive IRQs: 10 11 12
 pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
 pcibios0: PCI bus #1 is the last bus
 bios0: ROM list: 0xc0000/0xd000 0xd0000/0x4000! 0xd4000/0x800
 cpu0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
 pchb0 at pci0 dev 0 function 0 "VIA VT82C691 PCI" rev 0x44
 ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
 pci1 at ppb0 bus 1
 vga1 at pci1 dev 0 function 0 "ATI Radeon VE QY" rev 0x00
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 pcib0 at pci0 dev 7 function 0 "VIA VT82C596A ISA" rev 0x23
 pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel 0 configured to compatibility, channel 1 configured to compatibility
 wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0802N>
 wd0: 16-sector PIO, LBA48, 76351MB, 156368016 sectors
 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
 atapiscsi0 at pciide0 channel 1 drive 0
 scsibus0 at atapiscsi0: 2 targets
 cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-ROM DVD-119, 1.05> SCSI0 5/cdrom removable
 atapiscsi1 at pciide0 channel 1 drive 1
 scsibus1 at atapiscsi1: 2 targets
 cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8521B, 1.02> SCSI0 5/cdrom removable
 cd0(pciide0:1:0): using PIO mode 0, Ultra-DMA mode 4
 cd1(pciide0:1:1): using PIO mode 4, DMA mode 2
 uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x11: irq 12
 "VIA VT82C596 Power" rev 0x30 at pci0 dev 7 function 3 not configured
 rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: irq 11, address 00:40:f4:64:4d:d5
 rlphy0 at rl0 phy 0: RTL internal PHY
 vendor "NEC", unknown product 0x00e7 (class serial bus subclass Firewire, rev 0x01) at pci0 dev 9 function 0 not configured
 ahc0 at pci0 dev 12 function 0 "Adaptec AHA-2940U" rev 0x00: irq 11
 scsibus2 at ahc0: 16 targets
 isa0 at pcib0
 isadma0 at isa0
 pckbc0 at isa0 port 0x60/5
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
 pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
 isapnp0 at isa0 port 0x279: read port 0x203
 isapnp0: No current device for tag, card 1
 "Creative AWE64 PnP, CTL0045, , Audio" at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5 not configured
 "Creative AWE64 PnP, CTL7002, PNPB02F, Game" at isapnp0 port 0x200/8 not configured
 "Creative AWE64 PnP, CTL0022, , WaveTable" at isapnp0 port 0x620/4 not configured
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0: VIA UHCI root hub, rev 1.00/1.00, addr 1
 biomask ffe5 netmask ffe5 ttymask ffe7
 rd0: fixed, 3800 blocks
 uhub1 at uhub0 port 2: vendor 0x0451 product 0x2046, rev 1.10/1.25, addr 2
 uhidev0 at uhub1 port 4 configuration 1 interface 0
 uhidev0: CHICONY HP Basic USB Keyboard, rev 1.10/3.00, addr 3, iclass 3/1
 ukbd0 at uhidev0
 wskbd1 at ukbd0 mux 1
 wskbd1: connecting to wsdisplay0
 dkcsum: wd0 matches BIOS drive 0x80
 root on rd0a swap on rd0b dump on rd0b
 </include>
 
 
 And this is how the Netfinity 5000 shows up:
 <include>
 OpenBSD 4.2 (RAMDISK_CD) #468: Tue Aug 28 11:02:17 MDT 2007
     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
 cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 499 MHz
 cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
 real mem  = 536420352 (511MB)
 avail mem = 512679936 (488MB)
 mainbus0 at root
 bios0 at mainbus0: AT/286+ BIOS, date 02/09/01, BIOS32 rev. 0 @ 0xfd5e1
 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
 pcibios0: PCI BIOS has 11 Interrupt Routing table entries
 pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
 pcibios0: PCI bus #0 is the last bus
 bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5000
 acpi at mainbus0 not configured
 cpu0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
 pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-LE Host" rev 0x04
 pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-LE Host" rev 0x02
 pci1 at pchb1 bus 1
 ahc0 at pci0 dev 6 function 0 "Adaptec AIC-7895" rev 0x04: irq 15
 scsibus0 at ahc0: 16 targets
 ahc1 at pci0 dev 6 function 1 "Adaptec AIC-7895" rev 0x04: irq 10
 scsibus1 at ahc1: 16 targets
 sd0 at scsibus1 targ 0 lun 0: <QUANTUM, QM39100TD-SCA, N1K0> SCSI2 0/direct fixed
 sd0: 8683MB, 8057 cyl, 10 head, 220 sec, 512 bytes/sec, 17783249 sec total
 sd1 at scsibus1 targ 1 lun 0: <IBM-PSG, DNES-309170Y !#, SAHR> SCSI3 0/direct fixed
 sd1: 8678MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sec, 17774160 sec total
 sd2 at scsibus1 targ 2 lun 0: <IBMAS400, DGVS09U, S9NA> SCSI2 0/direct fixed
 sd2: 8429MB, 15110 cyl, 3 head, 380 sec, 512 bytes/sec, 17263908 sec total
 sd3 at scsibus1 targ 3 lun 0: <IBMAS400, DGVS09U, S9NA> SCSI2 0/direct fixed
 sd3: 8429MB, 15110 cyl, 3 head, 380 sec, 512 bytes/sec, 17263908 sec total
 sd4 at scsibus1 targ 4 lun 0: <IBMAS400, DGVS09U, S9NA> SCSI2 0/direct fixed
 sd4: 8429MB, 15110 cyl, 3 head, 380 sec, 512 bytes/sec, 17263908 sec total
 st0 at scsibus1 targ 6 lun 0: <Seagate, STT20000N, 7A64> SCSI2 1/sequential removable
 scsibus1 targ 14 lun 0: <SDR, GEM200, 2> SCSI2 3/processor fixed not configured
 pcn0 at pci0 dev 9 function 0 "AMD 79c970 PCnet-PCI" rev 0x36, Am79c972, rev 6: irq 11, address 00:06:29:50:d9:9e
 nsphyter0 at pcn0 phy 1: DP83843 10/100 PHY, rev. 0
 ukphy0 at pcn0 phy 31: Generic IEEE 802.3u media interface, rev. 1: OUI 0x00001a, model 0x0001
 vga1 at pci0 dev 10 function 0 "S3 Trio64V2/DX" rev 0x16
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 pcib0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x4d
 pciide0 at pci0 dev 15 function 1 "ServerWorks IDE" rev 0x4a: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility
 atapiscsi0 at pciide0 channel 0 drive 0
 scsibus2 at atapiscsi0: 2 targets
 cd0 at scsibus2 targ 0 lun 0: <SONY, CD-ROM CDU701-F, 1.0s> SCSI0 5/cdrom removable
 pciide0: no compatibility interrupt for use by channel 1
 ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04: irq 10, version 1.0, legacy support
 isa0 at pcib0
 isadma0 at isa0
 pckbc0 at isa0 port 0x60/5
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
 pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
 biomask f5e5 netmask ffe5 ttymask ffe7
 rd0: fixed, 3800 blocks
 ahc1: target 0 using 16bit transfers
 ahc1: target 0 synchronous at 5.7MHz, offset = 0x8
 dkcsum: sd0 matches BIOS drive 0x80
 dkcsum: sd0 matches BIOS drive 0x81 IGNORED
 ahc1: target 1 using 16bit transfers
 ahc1: target 1 synchronous at 5.7MHz, offset = 0x8
 dkcsum: sd1 matches BIOS drive 0x80 IGNORED
 dkcsum: sd1 matches BIOS drive 0x81
 ahc1: target 2 using 16bit transfers
 ahc1: target 2 synchronous at 5.7MHz, offset = 0x8
 dkcsum: sd2 matches BIOS drive 0x82
 ahc1: target 3 using 16bit transfers
 ahc1: target 3 synchronous at 5.7MHz, offset = 0x8
 dkcsum: sd3 matches BIOS drive 0x83
 ahc1: target 4 using 16bit transfers
 ahc1: target 4 synchronous at 5.7MHz, offset = 0x8
 dkcsum: sd4 matches BIOS drive 0x84
 root on rd0a swap on rd0b dump on rd0b
 </include>

More information about the freebsd-bugs mailing list